Jablotron JA-106KR 3G central with 3G / LAN and Radio module

Model: JA-106KR 3G
Availability: In stock - ships within 1 to 2 weekdays
  • Up to 120 wired BUS / wireless devices
  • Up to 300 unique user codes
  • Up to 8 areas
  • Up to 16 programmable PG outputs

This exchange is one of the major versions with 3G data communication. The center is well suited for large residential properties and businesses.
The idea of equipping the control panel with a GSM 3G module is that the data transfer speed increases significantly (especially for images) to the app or control panels (KC)
Besides that, it provides the ability for both calls and data transfer at the same time (2G GSM modules cannot handle this)

The advantage advantage of equipping the control panel with a GSM 3G module is the increase in the data transfer speed (especially for images) to the MyJablotron application or control centers (KC) as well as the possibility of both call and data transfer at the same time - This is not possible with standard 2G GSM modules.

  • Up to 120 wired BUS / wireless devices
  • Up to 300 unique user codes
  • Up to 15 areas
  • Up to 32 programmable PG outputs
  • 20 independent calendars
  • Reports from system to 30 users via SMS
  • Voice and SMS report for 5 users
  • 5 KC
  • 5 optional specific codes for KC (With individual ID)
  • Built-in LAN
  • Automatic detection of 2G / 3G networks with selection of best signal
  • NB! The battery is purchased separately
  • Compatible with F-Link 1.4.0 or later

The control panel has a built-in 2G / 3G GSM and LAN transmitter on the main board that can communicate with audio / voice, SMS or data to the end user or KC.
It comes with a 4GB memory card on PCB, so it has the ability to store all the log events, voice recordings, photos from the photodetector and much more.

The main board has the following terminals
- 2 x independent BUS terminals
- 1 x terminal for the radio module (JA-110R)
- 1 x terminal for PSTN transmitter (JA-190X)
- 1 x LAN terminal
- 1 x USB terminal

- Mains voltage 230 V / 50Hz
- Power supply type A (EN 50131-6)
- Backup battery 12V up to 7 - 18Ah
- Power supply loses AC 140 mA, in case of alarm 200mA
- Maximum charging time is 72 hours
- BUS power supply maximum
- Continuous load 1,2A
- Maximum output current (5 min.) 2A
Backup BUS power supply via
- 18Ah backup battery 12 hours at 1.2A
- JA-110R frequency 2-way Jablotron protocol 868MHz
- Number of addresses (wireless / BUS) max.120
- Log events 700MB approx. 7 mill. events incl. time and date
- Alarm verification function several detections from the same detector must be activated before an alarm is triggered
- Dimensions 36.0 x 30.0 x 10.9 cm
Safety class 2 according to EN 50131-1, EN 50131-6
and EN 50131-5-3 and EN 50131-3

F&P No .: 10.212-12661

For more information, please visit this product's webpage.