Hikvision DS-2CD2746G2-IZS 2.8-12mm Motorzoom AcuSense PoE
Perfekt til byggepladser hvor position til målet er en variabel, eller port/indkørsel.
Med dens 4 MegaPixel billedsensor leverer kameraet et rigtig godt dags billede & med op til 30m IR giver det også et godt nattebillede.
AcuSense giver kameraet mulighed for at klasifisere mennesker & køretøjer.
Kan tilgås fra både smartphone, PC og tablet gennem appen Hik-Connect.
Understøtter Dansk, Svensk, Norsk, Tysk og Engelsk sprog.
|Image Sensor||1/2.7" Progressive Scan CMOS|
|Min. Illumination||Color: 0.003 Lux @ (F1.4, AGC ON)|
|Day & Night||ICR Cut|
|Shutter Speed||1/3 s to 1/100,000 s|
|Angle Adjustment||Pan: 0° to 355°, tilt: 0° to 75°, rotate: 0° to 355°|
|Wide Dynamic Range||120 dB|
|Lens Type & FOV||2.8 to 12 mm, horizontal FOV 108° to 30°, vertical FOV 56° to 17°, diagonal FOV 131° to 35°|
|Lens Mount||Ø 14|
|IR Range||Up to 40 m|
|Smart Supplement Light||Yes|
|Max. Resolution||2592 × 1944|
|Main Stream||50Hz: 20fps (2592 × 1944) 25fps (2688 × 1520, 2304 × 1296, 1920 × 1080, 1280 × 720) 60Hz: 20fps (2592 × 1944) 30fps (2688 × 1520, 2304 × 1296, 1920 × 1080, 1280 × 720)|
|Sub Stream||50Hz: 25fps (640 × 480, 640 × 360, 320 × 240) 60Hz: 30fps (640 × 480, 640 × 360, 320 × 240)|
|Third Stream||50Hz: 25fps (1280 × 720, 640 × 480, 640 × 360, 360 × 240) 60Hz: 30fps (1280 × 720, 640 × 480, 640 × 360, 360 × 240)|
|Video Compression||Main stream: H.265/H.264 Sub-stream: H.265/H.264/MJPEG Third stream: H.265/H.264|
|Video Bit Rate||32 Kbps to 8 Mbps|
|H.264 Type||Baseline Profile/Main Profile/High Profile|
|H.265 Type||Main Profile|
|H.264+||Main Stream supports|
|H.265+||Main Stream supports|
|Bit Rate Control||CBR/VBR|
|Scalable Video Coding (SVC)||Yes|
|Region of Interest (ROI)||1 fixed region for each stream|
|Environment Noise Filtering||Yes|
|Audio Sampling Rate||8 kHz/16 kHz/32 kHz/44.1 kHz/48 kHz|
|Audio Bit Rate||64Kbps(G.711ulaw/G.711alaw)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/ 8-320Kbps(MP3)|
|Simultaneous Live View||Up to 6 channels|
|API||ONVIF (PROFILE S, PROFILE G, PROFILE T), ISAPI, SDK|
|Protocols||TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, SNMP|
|User/Host||Up to 32 users. 3 user levels: administrator, operator and user|
|Security||Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.2, WSSE and digest authentication for ONVIF|
|Network Storage||MicroSD/SDHC/SDXC card (256 GB) local storage, and NAS (NFS, SMB/CIFS), auto network replenishment (ANR) Together with high-end Hikvision memory card, memory card encryption and health detection are supported|
|Client||iVMS-4200, Hik-Connect, Hik-Central|
|Web Browser||Plug-in required live view: IE8+, Chrome 41.0-44, Firefox 30.0-51, Safari 8.0-11 Plug-in free live view: Chrome 57.0+, Firefox 52.0+|
|Day/Night Switch||Day, Night, Auto, Schedule|
|Image Enhancement||BLC, HLC, 3D DNR|
|Image Parameters Switch||Yes|
|Image Settings||Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance adjustable by client software or web browser|
|Alarm||1 input, 1 output (max. 24 VDC/24 VAC @500 mA)|
|Audio||1 input (line in), 3.5 mm connector, max. input amplitude: 3.3 Vpp, input impedance: 4.7 KΩ, interface type: non-equilibrium; 1 output (line out), 3.5 mm connector, max. output amplitude: 3.3 Vpp, output impedance: 100 Ω, interface type: non-equilibrium|
|On-board Storage||Built-in micro SD slot, up to 256 GB|
|Communication Interface||1 RJ45 10M/100M self-adaptive Ethernet port|
|Basic Event||Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, HDD full, HDD error),scene change detection|
|Deep Learning Algorithm|
|Perimeter Protection||Line crossing detection, intrusion detection, region entrance detection, region exiting detection|
|Storage Conditions||-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing)|
|Startup and Operating Conditions||-30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing)|
|Power Supply||12 VDC ± 25%, reverse polarity protection PoE: 802.3af,class 3|
|Power Consumption and Current||12 VDC, 0.9 A, max. 10.8 W PoE: (802.3af, 36 V to 57 V), 0.36 A to 0.23 A, max. 12.9 W|
|Power Interface||Two-core terminal block|
|Camera Dimension||Ø 153.5 × 133.1 mm (6.0" × 5.2")|
|Package Dimension||244 × 174 × 173 mm (9.6" × 6.9" × 6.8")|
|Camera Weight||Approx. 830 g (1.8 lb.)|
|With Package Weight||Approx. 1709 g (3.8 lb.)|
|Linkage Method||Upload to NAS/memory card, notify surveillance center, trigger record, trigger capture, audible warning|
|Web Client Language||33 languages English, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese, Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian|
|General Function||Anti-flicker, heartbeat, mirror, privacy masks, flash log, password reset via e-mail, pixel counter|
|EMC||FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 50130-4: 2011 +A1: 2014); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016); KC (KN 32: 2015, KN 35: 2015)|
|Safety||UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013); BIS (IS 13252(Part 1):2010+A1:2013+A2:2015); LOA (IEC/EN 60950-1)|
|Environment||CE-ROHS (2011/65/EU); WEEE (2012/19/EU); REACH (Regulation (EC) No 1907/2006)|
|Protection||Ingression protection: IP66 (IEC 60529-2013), IK10(IEC 62262:2002)|
This is one of the coolest and smartest cameras on the market. The surveillance camera is from the AcuSense family from Hikvision, which means that it is particularly suitable for giving you messages on the phone of people and vehicles. As you can see in the video below, the camera's specialty is to distinguish between people, vehicles and uninteresting things. (continued during the video ...)
(The video is on Danish)
About the camera
The camera can withstand sitting both inside and out, as it is IP67 approved, as long as you also mount the included membrane. An SD card can be mounted in the camera, which is opened with the included tool (SD card (memory card not included, but can be purchased here). There are also screws, raw plugs and a drilling template, which is easily glued to the concrete or bricks so you know exactly where you need to drill.The camera can be mounted in all directions, just like a 3-axis camera.The camera can be connected directly to your Hikvision recorder or NAS, but can also be used all alone with an SD card (memory card) .When the SD card is inserted, the camera records the video directly to the card and it can be played directly from the APP so you do not have to take it out.The camera can monitor the health of the SD card.
There are different types of AcuSense cameras, but common to them all is the designation at the end of the model number.
The model name tells you what features the camera has if it ends up:
- DS-2CDXXX6G2-I = Standard with infrared night vision
- DS-2CDXXX6G2-IU = With infrared night vision and microphone
- DS-2CDXXX6G2-ISU = With infrared night vision, microphone, alarm input and output
- DS-2CDXXX6G2-ISU / SL = With infrared night vision, microphone, alarm input and output, as well as white strobe light and speaker
Even if the camera is intelligent, it still needs some input from you. When the camera is mounted, you can choose between several types of "smart events" including "Detection of intrusion" where a square is drawn in the image and when a target moves into the square and stays longer than you have allowed (1 -10 seconds) your "reaction" is triggered. There is also line intersection, as detectors about a "target" move across the line you have drawn. It can be both ways or just one way. It can e.g. is used for one-way roads, so that an alarm is given when driving in the opposite direction or in a driveway so that you are only notified when people arrive, but not when they leave.
What is a reaction? The event that is triggered when a rule is violated is called a "reaction". Depending on which model is chosen, you have different options.
Most commonly used "reactions":
- Push message on mobile (get a picture sent directly to your phone, of the target that has broken the rule, with a link to direct play in APP)
- Send email (this feature should be used with caution as the mail provider may close your account for suspected spamming if too many photos are sent)
- Flashing white light
- Warning sound (siren or voice warning - it is also possible to record your own messages) *
- Alarm output (open a garage door, turn on lights, send signal to your alarm system, interact with IHC, etc.
To have all functions, you must select the models where model no. Ends at ISU / SL
Most cameras in the AcuSense series are available in 4 and 8 Megapixels (2K and 4K)
If the camera is connected to a newer recorder, you can also make "combined" reactions. This means that another given rule must be broken before the "reaction" is triggered. (AND logic). In practical terms, this means that one e.g. can "combine" with an "alarm input" so that the camera only sends messages if the alarm is turned on or a motion sensor is triggered. In this way, the system can be integrated into the building's systems.
You can use this NVR, among other things: https://ipcam-shop.dk/acusense-277/hikvision-ds-7608nxi-i2-s-8-channel-ip-acusense-nvr-p3055
The power supply for the camera is not included, as most users just use a PoE switch, but if you do not already have a power supply for the camera, you can choose one of the following options:
PoE Switch (recommended): https://ipcam-shop.dk/switch-52/
PoE Injektor: https://ipcam-shop.dk/injector-364/
12 Volt Power supply: https://ipcam-shop.dk/stroem-tilbehoer-216/stroemforsygning12v1a-p733
The camera can be mounted directly on the wall or in the ceiling / overhang. A rear box / bracket may be required, the joint of which cannot lie behind the wall, ceiling or eaves.
If your AcuSense camera is to be mounted on a mast, you must also use a mast bracket. Model no. Of fittings and mast fittings can be seen in the data sheet.
NB: REMEMBER TO CHOOSE NETWORK CABLES, IF YOU DO NOT HAVE YOURSELF IN ADVANCE, TWO TO BE USED, ONE FAR FROM THE CAMERA AND INTO THE POE INJECTOR WHICH IS TYPICALLY INSERTED BY THE ROUTER IN A ROUTER IN A ROUTER. CHOOSE CABLE!
Explanation by AcuSense
For more information, please visit this product's webpage.