Hikvision DS-3E1310P-SI 8 port PoE+ Switch

Model: DS-3E1310P-SI
1.399,00
( 1.119,20 )
Availability: Out of stock
  • PoE switch for 8 cameras
  • Extend (up to 300m PoE)
  • Up to 125 watts in total
  • Up to 30 watts on each port
Model DS-3E1310P-SI

 

 

 

 

 

Network Parameters

Port Number 8 × 100 Mbps PoE RJ45 port, and 2 × gigabit combo
Port Type RJ45 port, full duplex, MDI/MDI-X adaptive
Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
Forwarding Mode Store-and-forward switching
Working Mode Standard mode (default)
Extend mode
MAC Address Table 16 K
Switching Capacity 5.6 Gbps
Packet Forwarding Rate 4.1664 Mpps
Internal Cache 4 Mbits

 

 

PoE Power Supply

PoE Standard IEEE 802.3af, IEEE 802.3at

 

PoE Power Pin

End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port Ports 1 to 8
Max. Port Power 30W
PoE Power Budget 125 W

 

 

 

 

 

 

 

 

Software Function

Device Maintenance Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import viewing, basic network parameters configuration, import and export configuration, time sync
Port Configuration Port rate configuration, slow control, and ports enabling
Long Range Up to 300 m transmission
PoE Configuration PoE watchdog: Ports 1 to 8 auto detect and restart the cameras that do not respond.
PoE enabling: Support
Port Rate-Limiting Rate-limiting for ingress and egress ports
Storm Control Storm control of unknown unicast, multicast and broadcast
Port Mirroring Support
Link Aggregation Static link aggregation supported for G1 and G2 port
Port Isolation Ports in isolation group cannot communicate with each other.
QoS WRR and SP scheduling and port priority
VLAN 4094 VLANs
STP STP and RSTP protocols
SNMP SNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces
LLDP LLDP protocol supported for port configuration, global configuration and neighbor discovery

 

 

 

 

 

General

Shell Metal material
Net Weight 1.72 kg (3.79 lb)
Gross Weight 2.20 kg (4.85 lb)
Dimension (W × H × D) 266 mm × 44.5 mm × 220.8 mm (10.47" × 1.75" × 8.69")
Operating Temperature -10°C to 55°C (14°F to 131°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Operating Humidity 5% to 95% (no condensation)
Relative Humidity 5% to 95% (no condensation)
Power Supply 100 VAC~240 VAC, 50/60 Hz, Max. 1.5 A
Max. Power Consumption 150 W
Power Consumption in Idle  5 W

 

 

Approval

EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)
Safety  UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach
(Regulation (EC) No.1907/2006)

Hikvision's smart managed * switches are ideal for video surveillance, as they provide power to all types of Active PoE devices, other than Hikvsion brands. However, if you use it for Hikvision's own products, you get an extra advantage, namely the advantage of their "extend" technology. PoE extend means that you can connect devices up to 300 meters away from the switch, where conventional switches can reach a maximum of 70 meters with PoE.

The switch can deliver up to 30 watts on each port - but the total PoE power consumption must not exceed 123 watts. For example, a PTZ like this DS-2DE4225IW-DE (S5) uses a maximum of 18 watts, leaving 105 watts for the remaining ports / cameras. For reference, a camera like this DS-2CD2346G2-IU uses approx. 7 watts.

The switch can take SFP modules, for fiber connection:

*Managed switches mean that you can manage the switch, ie you can configure it for VLAN, priorities etc. Switches like this are recommended for users with a deeper knowledge of networks and with a specific need to configure the switch. DS-3E1310P-IS Can of course also "just" be set to out-of-the-box, like a regular switch.

Watch a video about Hikvision smart switch here (English): https://www.youtube.com/watch?v=wU-bqihJdbo

 

- HIKVISION DS-3E1310P-IS
- 8port PoE Switch
- 8 x 10/100 +2 x GB ports
- Can be used up to 250 meters on Extend port
- IEEE802.3at and  IEEE 802.3at,  Power over Ethernet (PoE) compliant
- Power over Ethernet (PoE): PoE+
- Provides up to 30 watt on each PoE port
- PoE power budget 125W
- 4 kV surge protection for PoE-ports
- VLAN configurabel

 

For more information, please visit this product's webpage.