Jablotron JA-120Z BUS Booster device with PSU backup
Model:
JA-120Z
Availability:
In stock - ships within 1 to 2 weekdays
Do you have questions about the product? +45 70701009
The JA-120Z is a wireless BUS device belonging to the JA-100 system. With this it is possible to extend the data bus by 2 x 500 meters per. JA-120Z unit. The unit has a built-in power supply of 2A, with battery back-up. The data bus can be a maximum of 2000 meters, so up to three JA-120Z can be mounted in a row. The data buses are galvanically isolated.
It is recommended that you install the JA-120Z in a PLV-CP-L enclosure.
The device supports from 7 to 18 Ah battery, depending on the type of mounting cabinet. It is also able to integrate with F-Link, with current status information and setting.
Technical specifications
| Power supply (JA-83PWR power supply) | 90-250 V AC |
| Spending | 50VA |
| Powered by the BUS control panel | 12V (9..15V) |
| Nominal for backup calculation | 10 mA |
| Output voltage typically | 13.7 V DC |
| Maximum load current | 2 A |
| Galvanically insulated | (test volt 4 kV) |
| Back-up battery 12 V. | 7 - 18 Ah |
| Backup-type battey | stay, gel |
| Low battery level | ≤ 10.9 V |
| Maximum time to charge backup battery | <72 h / 80% C and 18 Ah |
| PCB dimensions | 102 x 66 x 14 mm |
| Installation environment | Generally indoors |
| Operating temperature range | -10 to +40 ° C |
| Operation humidity | 75% RH, non-condensing |
There is no reviews yet. Be the first to write us your opinion
