Complete "wireless cable" kit
Wireless cable to the garage, barn, outbuilding or other places where cable routing is impossible
- complete kit - all accessories included (both for PSU and PoE)
- long range - up to 200 meters in clear view.
- easy setup - delivered pre-programmed
- can sit inside and out
- 60 Ghz ensure good penetration of walls etc.
The transfer rate is up to 1 Gb / s
RBWAPG-60ADKIT | |
---|---|
Specifications | |
Product code | RBwAPG-60ad |
Architecture | ARM 32bit |
CPU | IPQ-4019 |
CPU core count | 4 |
CPU nominal frequency | 716 MHz |
Dimensions | 185 x 85 x 30 mm |
RouterOS license | 3 |
Operating System | RouterOS |
Size of RAM | 256 MB |
Storage size | 16 MB |
Storage type | FLASH |
MTBF | Approximately 100'000 hours at 25C |
Tested ambient temperature | -40°C to 70°C |
IPsec hardware acceleration | Yes |
Suggested price | $99.00 |
Powering | |
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 11-57 V |
Max power consumption | 5 W |
FAN count | Passive |
PoE in | 802.3af/at |
PoE in input Voltage | 11-57 V |
Ethernet | |
10/100/1000 Ethernet ports | 1 |
Certification & Approvals | |
Certification | CE, FCC, IC, EAC, ROHS |
IP | 55 |
There is no reviews yet. Be the first to write us your opinion
Ingenious product for those situations where cable routing is impossible or undesirable. Unpack the kit and plug it in and it will work. No programming required, they just need to face each other.
Can shoot through non-metallized glass (glass without metal film etc.) and has a very good permeability due to 60 Ghz.
Maximum range is over 200 meters. In a building, one should expect the signal to be weaker every time objects such as walls, concrete, etc. are shot through. The worst is metal, it is difficult to penetrate.
The kit contains ...
- 2 pcs. sender / receiver (paired with each other)
- 2 pcs. power supplies
- 2 pcs. PoE injector
- 2 pcs. strips
- 2 pcs. feet (for standing solution)
- 2 pcs. brackets for ceiling mounting
- 2 pcs. clamps for mast mounting