facebook

Hikvision DS-3E1310HP-EI 8-ports Smart Hi-PoE Switch

Modell: DS-3E1310HP-EI
1,204.00  inkl. mva.
( 1,204.00  ekskl. mva. )
Tilgjengelighet: På lager
Har du spørsmål om produktet? +45 70701009
  • General
  • ShellMetal material, IP40
  • Net Weight0.550 kg (1.21 lb)
  • Gross Weight0.950 kg (2.09 lb)
  • Dimensions (W × H × D)217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06")
  • Operating Temperature0 °C to 40 °C (0 °F to 104 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply54 VDC, 2.22 A
  • Installation ModeDesk-Mounted,Wall-Mounted
  • Max. Power Consumption120 W
  • Power Consumption in Idle4 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports8 × 10/100 Mbps PoE port,2 × Gigabit RJ45 port
  • MAC Address Table16 K
  • Switching Capacity9.2 Gbps
  • Packet Forwarding Rate6.84 Mpps
  • Internal Cache4 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortHi-PoE: Ports 1 to 2,PoE: Ports 3 to 8
  • Max. Port PowerPort 1 to 2:90 W Ports 3 to 8:30 W
  • PoE Power Budget110 W
  • Software Function
  • Long RangePorts 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
  • PoE WatchdogPorts 1  to 8: auto detect and restart the cameras that do not respond.
  • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
  • System MaintenanceSupport device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
  • Approval
  • EMCFCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015)
  • SafetyUL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)

Det er ingen omtaler enda. Bli den første til å gi oss din mening.

Legg til omtale: