Ajax multisender
Modell:
MultiTrans EOL
1.279,20
inkl. mva.
(
1.279,20
ekskl. mva.
)
Smart sender som kan konvertere ditt gamle system
- Opptil 18 kablede enheter
- Sender trådløst til HUB
- Opptil 2000 mi klar sikt
- Hvit
| Manual |
| Technical specifications | |
| Product type | Wireless module to integrate up to 18 third-party wired devices into an Ajax system |
| Wired zones | 18 wired zones Multiple devices can be connected to one zone, depending on their power consumption |
| Connection types | NC NO EOL 2EOL and 3EOL with firmware version 2.13.0 or later |
| EOL resistance | From 1 kΩ to 7.5 kΩ with 100 Ω increment for firmware below 2.13 From 1 kΩ to 15 kΩ for each resistor, up to 30 kΩ total resistance, for firmware 2.13 and later Resistance is measured automatically in Ajax PRO apps |
| Cable length | Up to 400 m When using signal cable with 0.22 mm² copper-clad aluminium conductor |
| Operation mode | Pulse Bistable Adjusted in Ajax apps by a PRO or user with admin rights |
| Event types | 15 event types Tamper alarm Intrusion Fire Auxiliary alarm Panic button Gas alarm Malfunction Leakage Glass break High temperature Low temperature Masking Duress code opening Vibration seismic sensor Custom |
| Communication technology | Jeweller radio communication Two-way communication Block encryption with dynamic key Remote control and configuration in Ajax apps |
| Frequency bands | 866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz 905.0–926.5 MHz 915.85–926.5 MHz 921.0–922.0 MHz Depends on sales region |
| Radio communication range | Up to 2000 m in open space |
| Maximum effective radiated power | Up to 20 mW |
| Radio signal modulation | GFSK |
| Sabotage protection | Two tampers to detect casing opening and detachment from wall Protection against spoofing with device authentication |
| Communication loss detection | Within 36 seconds between hub or range extender and MultiTransmitter Depends on Jeweller or Jeweller/Fibra settings |
| Wired connection monitoring | Instant detection of wired connection loss, short circuits, and malfunctions when using EOL, 2EOL, or 3EOL connection type Depends on connection type |
| Installation | Designed for indoor use only Powered from 100–240 V AC mains |
| Main power supply | 100–240 V AC, 50/60 Hz Type A power supply Used inside supervised premises |
| Power consumption | Quiescent current: 14.6 mA Maximum current: 69.6 mA |
| Backup power supply | 12 V DC backup battery, up to 7 Ah Full charge cycle up to 30 hours Average consumption from backup battery after mains loss: up to 33 mA without detectors Backup battery is not included |
| Backup battery runtime | Minimum 7 hours at maximum 1 A load with 7 Ah battery For 12 hours autonomous operation: maximum load 0.55 A For 24 hours autonomous operation: maximum load 0.28 A |
| Backup battery voltage thresholds | Low battery voltage: 11.4 V DC Low battery recovery voltage: 12.9 V DC End-of-life battery voltage: 11.1 V DC Maximum output peak-to-peak ripple battery voltage: 50 mV DC |
| Connected devices power supply | 10.5–15 V DC Up to 1 A total maximum current consumption Two power lines for other devices One power line for fire detectors |
| Operating temperature | From −10 °C to +40 °C |
| Operating humidity | Up to 75% |
| Protection class | IP40, IK06 |
| Dimensions | 192 × 238 × 100 mm |
| Weight | White device: 874 g Black device: 802 g |
| Colours | Black White |
| Package contents | MultiTransmitter Jeweller board Casing Power cable Screw terminal block adapter, only for INCERT compliance 12 V DC battery connection cable Installation kit Quick start guide |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne | |
Det er ingen omtaler enda. Bli den første til å gi oss din mening.
Her kan du se kompatibiliteten mellom de ulike enhetene og Hubs fra Ajax
https://ajax.systems/tools/devices-compatibility/
Smart sender som kan konvertere gamle kablede detektorer til ditt Ajax-system
Med denne smarte Ajax Multitransmitteren kan du konvertere ditt gamle kablede alarmsystem til Ajax. Du kobler opptil 18 kablede enheter direkte til enheten, som deretter sender et trådløst signal til Ajax HUB. På den måten kan du unngå å måtte bytte ut alle dine gamle enheter og fortsatt ha et supersmart nytt system.
Du kan enkelt spesifisere hvilken sensor det er og hvilket rom den er i. Du kan få Hub til å sende deg en SMS eller ringe deg. Det er også mulighet for dem å ringe et kundesenter direkte.
- Opptil 2000 mi fri sikt
- Opptil 18 kablede enheter
- Sabotasjealarm
- Jammer alarm
