Uniview NSW2020-16T1GT1G
⭐️ ⭐️ ⭐️ ⭐️ ★ ★
3.900,00
Incl. Moms
(
3.120,00
Excl. Moms
)
16 ports Gb-switch til videoovervågning og access-points
- 16+2+1 PoE-porte til kameraer, 2 uplink-porte til videre forbindelser og 1 SFP port til fiber
- 3 modes: Normal, Secure og Surveillance
- op til 30 watt pr. port, kan drive selv mange små PTZ kamera (270 watt totalbudget)
- up til 250 meters PoE i surveillance-mode
- kan monteres i racks, beslag medfølger.
- aktiv køling
- metalhus
Fordi switchen er Gb en gigabit-switch, så har den den båndbredde der skal til, for at kunne samle datastrømme fra andre switche eller fra trådløse acces-points (WIFI-noder).
| Datablad |
| Model | NSW2020-6T-POE-IN | NSW2020-10T-POE-IN | NSW2020-16T1GT1GC-POE-IN | NSW2020-24T1GT1GC-POE-IN |
| Ports | 6×100Mbps network ports (RJ45), including 4 PoE ports | 10×100Mbps network ports (RJ45), including 8 PoE ports | 16×100Mbps PoE ports (RJ45)+ 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports | 24×100Mbps PoE ports (RJ45) + 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
| Standards | IEEE802.3,IEEE802.3u,IEEE802.3az,IEEE802.3x,IEEE802.3af,IEEE802.3at | IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az | ||
| Switching capacity | 1.2Gbps | 2Gbps | 7.2Gbps | 8.8Gbps |
| Forwarding performance | 0.90Mpps | 1.49Mpps | 5.36Mpps | 6.55Mpps |
| Packet Buffer | 448Kbit | 448kbit | 4M bit | 4Mbit |
| MAC | 1K | 1K | 16K | 16K |
| Dimensions (W×D×H) | 107*101*25mm | 171*103*25mm | 440*195*44mm | 440*250*44mm |
| Weight | 0.19KG | 0.29KG | 2.12KG | 2.93KG |
| Power supply | DC：48/51V | AC: 100-240V, 50/60Hz | ||
| PoE | 802.3at/af （4/5+，7/8-） | |||
| Max. PoE Power | Max capacity: 60W Max capacity for single port: 30W |
Max capacity:88W Max capacity for single port: 30W |
Max capacity: 225W Max capacity for single port: 30W |
Max capacity: 370W Max capacity for single port: 30W |
| Prior Ports | 1~2 | 1~2 | 1~8 | 1~8 |
| Cooling Fans | 0 | 0 | 1 | 1 |
| Operating temperature | 0°C-40°C (32°F-104°F) | |||
| Operating humidity | 10%～90% (noncondensing) | |||
| Storage humidity | 5%～90% (noncondensing) | |||
| Indicator | POWER: Steady on: AC input is normal Off: No AC input |
|||
| No PoE Indicator | PoE: Off: No PoE power supply Steady on: PoE power supply is normal |
|||
| PoE-MAX： off ：The POE power supply power of the whole machine is less than 80% of the specification Steady on : The POE power supply power of the whole machine is greater than 85% of the specification |
||||
| LINK/ACT： Off: No link Steady on: Linked Flashing: Transmitting data |
||||
| Working Mode | Default(Normal mode) : All ports can communicate with each other. EXTEND(Surveillance mode): Transmission distance up to 250 meters. |
Default(Normal mode) : All ports can communicate with each other. VLAN(Secure mode): Downlink ports can communicate only with uplink ports. Enabling PD keepalive function, the switch will restart the IPC via PoE power when the IPC sends no message in a period of time. Extend(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
||
Det finns inga recensioner här. Vi kommer gärna om du vill rapportera som den första.
Power over Ethernet
Gillar du proffsen. Poe betyder att endast en kabel ska dras till kameran. Kameran får ström genom nätverkskabeln, vanligtvis från en inspelare med inbyggd Poe, eller från en POE-switch.
