Uniview switch PoE 4+2 ext 30/60W
Model/varenr.:
NSW2020-6T-PoE-IN
369,00
m/Moms
(
295,20
u/Moms
)
Lager:
På lager og klar til afsendelse
På lager og klar til afsendelse
Har du spørgsmål til produktet?
Bare giv os et kald på 70701009
Bare giv os et kald på 70701009
6 ports switch til alle typer videoovervågning
- 4 PoE-porte til kameraer og 2 uplink-porte til videre forbindelser
- 3 modes: Normal, Secure og Surveillance
- op til 30 watt pr. port, kan drive selv mange små PTZ kamera
- up til 250 meters PoE i surveillance-mode
- kan monteres i racks, beslag medfølger.
- metalhus
| Datablad |
| Model | NSW2020-6T-POE-IN | NSW2020-10T-POE-IN | NSW2020-16T1GT1GC-POE-IN | NSW2020-24T1GT1GC-POE-IN |
| Ports | 6×100Mbps network ports (RJ45), including 4 PoE ports | 10×100Mbps network ports (RJ45), including 8 PoE ports | 16×100Mbps PoE ports (RJ45)+ 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports | 24×100Mbps PoE ports (RJ45) + 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
| Standards | IEEE802.3,IEEE802.3u,IEEE802.3az,IEEE802.3x,IEEE802.3af,IEEE802.3at | IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az | ||
| Switching capacity | 1.2Gbps | 2Gbps | 7.2Gbps | 8.8Gbps |
| Forwarding performance | 0.90Mpps | 1.49Mpps | 5.36Mpps | 6.55Mpps |
| Packet Buffer | 448Kbit | 448kbit | 4M bit | 4Mbit |
| MAC | 1K | 1K | 16K | 16K |
| Dimensions (W×D×H) | 107*101*25mm | 171*103*25mm | 440*195*44mm | 440*250*44mm |
| Weight | 0.19KG | 0.29KG | 2.12KG | 2.93KG |
| Power supply | DC：48/51V | AC: 100-240V, 50/60Hz | ||
| PoE | 802.3at/af （4/5+，7/8-） | |||
| Max. PoE Power | Max capacity: 60W Max capacity for single port: 30W |
Max capacity:88W Max capacity for single port: 30W |
Max capacity: 225W Max capacity for single port: 30W |
Max capacity: 370W Max capacity for single port: 30W |
| Prior Ports | 1~2 | 1~2 | 1~8 | 1~8 |
| Cooling Fans | 0 | 0 | 1 | 1 |
| Operating temperature | 0°C-40°C (32°F-104°F) | |||
| Operating humidity | 10%～90% (noncondensing) | |||
| Storage humidity | 5%～90% (noncondensing) | |||
| Indicator | POWER: Steady on: AC input is normal Off: No AC input |
|||
| No PoE Indicator | PoE: Off: No PoE power supply Steady on: PoE power supply is normal |
|||
| PoE-MAX： off ：The POE power supply power of the whole machine is less than 80% of the specification Steady on : The POE power supply power of the whole machine is greater than 85% of the specification |
||||
| LINK/ACT： Off: No link Steady on: Linked Flashing: Transmitting data |
||||
| Working Mode | Default(Normal mode) : All ports can communicate with each other. EXTEND(Surveillance mode): Transmission distance up to 250 meters. |
Default(Normal mode) : All ports can communicate with each other. VLAN(Secure mode): Downlink ports can communicate only with uplink ports. Enabling PD keepalive function, the switch will restart the IPC via PoE power when the IPC sends no message in a period of time. Extend(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
||
Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.
Power over Ethernet
Gør som de professionelle. PoE betyder at der kun skal trækkes 1 kabel til kameraet. Kameraet får strøm gennem netværkskablet, typisk fra en optager med indbygget PoE, eller fra en PoE-switch.
