Hikvision DS-KIS606-P KIT with door intercom and 4.3" screen
Complete video doorphone with camera and 4.3" indoor screen
- See and talk to visitors before you open the door
- Indoor screen where you can clearly see who is ringing
- Use the app on your phone so you can answer – even when you’re not at home
- Outdoor panel with high-quality camera and call button
- Suitable for houses, terraced homes and small businesses
- Expandable with up to 16 indoor screens
- Easy operation for the whole family
Stock is VERY limited, so the offer runs only while supplies last.
NB! If you choose 'bank transfer' at payment, the offer is reserved for one hour. If payment is not received within one hour of ordering, the order will be canceled and the item will no longer be reserved.
Video stream
Camera
4 MP CMOS sensor
Resolution
up to 2688 × 1520 px
Camera viewing angles
horizontal: 155°
vertical: 90°
Video protocol
JetSparrow
Fast and encrypted peer-to-peer video protocol developed by Ajax Systems.
Storage options
NVR
Ajax Cloud Storage
Video codec
H.264
Dynamic range
HDR
Improves the accuracy of detail in bright and dark scenes.
Communication channel
Wi-Fi
802.11 b/g/n module
2.4 GHz, up to 2 Mbit/s.
Jeweller and Wings communication technologies
Proprietary wireless communication technologies to transmit commands, alarms, events, and photo verifications. They serve as a backup communication channel when the device is added to the hub.
Key features
Two-way communication
Clear and loud voice communication between users and visitors near the device.
Motion detection
The device detects movement using a built-in PIR sensor and software image frame analysis.
Object detection
using AI
- People.
- Pets.
- Vehicles.
Smart IR illumination
up to 6 m
Automatic adjustment of intensity in real time to avoid overexposure. This allows you to see objects that are far away or too close to the camera in low-light conditions.
Visual verification of Ajax alarms
The system allows you to set up a scenario when Ajax detectors activate selected cameras to start recording. The result is immediately sent to the mobile or desktop monitoring app.
Support for ONVIF authorization
Profile S
Profile T (partially)
Ajax cameras and NVRs can be integrated into third-party video management systems (VMS).
Microphone
For two-way communication and sound recording at the site.
Audio codec
G722
Audio processing
Always active noise suppression and echo cancellation.
PIR detection
Sensitive elements
1 × PIR sensor
Motion detection distance
up to 4 m
Depends on the sensitivity level adjusted in the device settings.
Motion detection angle
horizontal: 120°
vertical: 100°
Sensitivity
3 levels
Adjusted by a PRO or a user with admin rights in Ajax apps.
Installation recommendations
It is recommended to install the device at a height of 1.2–1.5 m.
The device is designed for outdoor and indoor use.
It is not recommended to install the device in direct sunlight. This may cause overheating and damage to the device's electrical components.
Sabotage protection
Holding screw
secures the device on SmartBracket
mTLS
Encrypted connection for data protection.
Authentication
via Ajax Cloud
Without local access rights.
Secure Boot
Protection against firmware spoofing.
OTA signature verification
Secure automatic firmware update.
Privacy
Access rights distribution for users in mobile apps and for monitoring operators in PRO Desktop.
Communication loss detection
Wi-Fi: can be set from 30 s
Jeweller/Wings: after 36 s
Detection time depends on Ajax Cloud connection and Jeweller or Jeweller/Fibra settings.
Power supply
Device power consumption
10 W
Main DC voltage range
12–24 V⎓
Main AC voltage range
16–24 V~, 50/60 Hz
Minimum current
wired chime is not connected:
- 1 A for 12 V⎓
- 0.5 A for 24 V⎓
- 0.6 A for 16 V~
- 0.4 A for 24 V~
wired chime is connected:
- 3 A for 12 V⎓
- 3 A for 24 V⎓
- 0.6 A for 16 V~
- 0.4 A for 24 V~
Battery
built-in rechargeable battery: Li-ion 600 mАh
Intended to heat the device in a cold climate and provide a backup power supply for short periods.
Power supply recommendations
When DoorBell is connected to a wired chime using BellKit, a more powerful power supply is required to ensure stable device operation:
- DC: 12–24 V, 3 A or more;
- AC: 16–24 V, 10 VA or more.
Enclosure
Dimensions
145 × 47 × 34 mm
Weight
163 g
Operating temperature range
from −25 °C to +60 °C
Operating humidity
up to 90%
Protection class
IP54
There is no reviews yet. Be the first to write us your opinion
Complete set with video doorphone and indoor screen
DS-KIS606-P is a complete intercom kit consisting of an outdoor panel with camera and call button as well as an indoor 4.3" screen. The system lets you see and talk to visitors before you open the door. You can do this from the screen or via the mobile app.
Outdoor doorbell with camera
The door station is mounted by the front door and works as both a doorbell and a camera. It gives a clear image of the person at the door and works in both daylight and darkness. It is weather-protected and can stay outside all year round.
Indoor screen – 4.3" color display
Inside you get a small and simple screen where you can see a live image of the visitor. You can talk directly with the guest via the screen's speaker and microphone. The screen is easy to use for the whole family.
Answer from your phone – even when you’re not at home
The system can be connected to the Hik-Connect app. That means you can answer the door from your phone, see the live view and talk to the visitor, even if you’re not at home.
Quiet and clear sound
The system delivers clear audio on both ends so the conversation is easy to understand for you and the visitor.
Expandable
DS-KIS606-P allows you to add more indoor screens if you want to answer the door from several rooms or floors.
This is how easy it is to set up
The door station is connected with a network cable and gets power via PoE. The indoor panel uses WiFi or network. Once connected, follow the app's instructions and the system is quickly ready to use.
Power and cables
The door station connects with a standard network cable (RJ45) and gets power via PoE, so power and data run through a single cable. That makes installation simple and requires no separate power supply at the door.
The indoor screen can be connected either via WiFi or network cable, and it gets power from a standard power adapter.
