Jablotron detektorer

The JA-185B is a mini wireless glass break detector that can also be nicely installed in a car. It can detect broken glass within a radius of 9 meters. This is done by analyzing the air pressure in the room. If a change occurs at the same time as the sound of glass being smashed, it activates an alarm. To prevent false alarms, the detector uses digital signal processing.

Technical specifications

JA-180B is a mini wireless acoustic glass break detector, to mount on a flat surface that can detect glass break within a radius of nine meters. In addition, the detector also analyzes the air pressure in the room. A change of this, along with the sound of glass being smashed, activates an alarm. To reduce the risk of false alarms, it uses the digital signaling process. In addition, this detector has a high degree of immunity to RF jamming and the like. The device's detection sensitivity can be easily adjusted according to the distance and dimensions of the windows that require protection.

Technical specifications

JA-157P is a wireless outdoor detector with curtain lens, from Jablotron. The device is capable of detecting human movement outside the building. It does this via a dual-zone outdoor detector, with a 5 ° detection angle, made by OPTEX. The unit is suitable for narrow places, such as balconies, shafts or doorways.

The detector due to its dual-PIR system, a high degree of immunity to false alarms. In addition, it has three tamper switches and is equipped with anti-mask function.

The unit also has a built-in transmitter for the JABLOTRON 100 system.

Technical specifications

JA-158P is designed to detect human movement in a monitored outdoor area. It does so with its dual-zone PIR sensor made by OPTEX. However, the transmitter is by Jablotron. The PIR sensors have non-overlapping 94-zone detection, thus avoiding disturbing detections of small animals. The device's power is supplied by lithium batteries, and the detector can even find out to report low battery status to the control panel.

The device has both anti-mask function and a tamper switch on both the front and back, which can notify you if the device is removed from the wall or if the front is removed.

Technical specifications

JA-110F BUS is a water damage detector for bathrooms, basements and the like. When the electrodes are flooded, a signal is sent to the control panel through BUS. It does the same when the water disappears again. The detector takes up one space in the control panel and is also not equipped with a tamper switch.

JA-110TP is a thermostat that, together with a programmable output module, can provide full control over the temperature in the home or business. It allows you to monitor and remotely control temperature from the MyJablotron mobile app or website and provides access to a lot of other smart features. You can, for example, see graphs of the temperature history, get notifications in case of overheating or freezing, reduce the heat if a window is opened, maintain the minimum temperature by deactivation, weekly schedule and night setback. It is also possible to switch to manual temperature control if desired. In addition, it can also control a PG output in the system.

Note that the device takes up one space in the system.

A system can have up to 16 thermostats.

Technical specifications

JA-111 TH is a BUS-based temperature gauge that can detect temperatures between -20 ° C and + 60 ° C. Via the control panel, the meter sends its data to the Web Self Service (WSS) on Cloud Jablotron, where the data is stored. From here you can see graphs of measured temperatures, or choose to receive notifications (SMS, push notification, or email) about eg temperature fluctuations. There is also both a web page and mobile app from which you can access status.

If you need temperature measurement in outdoor or climatically demanding environments (IP53), JB-EXT-TH-B makes this possible. It does this using an internal or external sensor. The internal sensor, which is part of the product, measures the temperature in a range from -40 to 60 ° C. If you need something that can measure temperatures on both gas, liquid or solids, in the range from -50 to 200 ° C, you must, however, have a JB-TS-PT1000, which is an external sensor (not included) .

The measured data is sent to MyJablotron, where it is analyzed and saved for later use. This could be for activating a selected PG output, SMS reporting when temperature limits are exceeded or for creating diagrams of the measured temperatures. All these features are programmable in the MyJablotron app.

Note that PG control is only assigned to a maximum of two thermometers per central.

Cloud Jablotron can notify if temperature limits are exceeded, display graphs of previously measured temperatures, and can be programmed to notify different people when different criteria are met - e.g. by temperature drop or rise.

JB-EXT-TH-B is i.a. optimal for monitoring temperatures in server rooms and refrigerated display cases, or for frost-proofing a holiday home.

JA-151 TH is a wireless temperature gauge, from Jablotron. From the meter, data is sent, via the control panel, to the Web Self Service (WSS) on Cloud Jablotron. The measured dates are stored in WSS, and from here you can see temperature graphs and set up parameters for notifications about e.g. fluctuations in temperatures. These notifications can be obtained via SMS, push notification from the app or email. In addition, you can see the status on either the mobile app or on the website.

With these functions, the sensor is suitable for keeping track of refrigerated display cases, server rooms, frost protection of holiday homes, etc.

Please note that the wireless version is not recommended for freezers.

Technical specifications

If you need wireless temperature measurement in outdoor or climatically demanding environments (IP 53), JB-EXT-TH-R makes this possible. It does this using an internal or external sensor. The internal sensor, which is part of the product, measures the temperature in a range from -25 to 60 ° C. If you need something that can measure temperatures on both gas, liquid or solids, in the range from -50 to 200 ° C, you must, however, have a JB-TS-PT1000, which is an external sensor (not included) .

The measured data is sent to MyJablotron, where it is analyzed and saved for later use. This could be for activating a selected PG output, SMS reporting when temperature limits are exceeded or for creating diagrams of the measured temperatures. All these features are programmable in the MyJablotron app.

Note that PG control is only assigned to a maximum of two thermometers per central.

Cloud Jablotron can notify if temperature limits are exceeded, display graphs of previously measured temperatures, and can be programmed to notify different people when different criteria are met - e.g. by temperature drop or rise.

JB-EXT-TH-R is thus optimal for monitoring temperatures in server rooms and refrigerated display cases, or for, for example, frost-proofing a holiday home.