Bosch NDA-U-WMT Wall bracket
Wall mount from Bosch that fits many of their cameras
- Fits various cameras and mounts - read more below
- On the camera's product page you can see which mounts are compatible under the 'Accessories' section.
| Download |
| Datasheet |
| Certifications and approvals |
| Environmental | |
| Salt mist | IEC60068-2-52 |
| Vibration | NEMA TS2 |
| Shock | IEC60068-2-27 |
| Impact | IK10 |
| Parts included |
| Quantity | Component |
| 1 | Wall mount |
| 4 | M5 x 16mm pan head Torx screw with Zinc coating |
| 1 | Thread seal tape: PTFE tape |
| 1 | IP rubber plug |
| 1 | T25 Torx key |
| 1 | Quick Installation Guide |
| Technical specifications |
| Mechanical |
|
Dimensions (connection plate) |
Φ 101.5 mm (4 in) |
| Dimensions (W x H) | 227.4 x 155.7 mm (9 x 6.1 in) |
| Weight | 650 g (1.43 lb) |
| Standard Color | White (RAL 9003) |
|
Construction Material |
Aluminum alloy |
There is no reviews yet. Be the first to write us your opinion
Bosch wall bracket for mounting cameras
This pendant wall mount is used to install cameras that need to hang from a wall. It fits several Bosch cameras with the right adapter.
Easy installation
The bracket is easy to install, and the camera is easily attached with the right adapter. Extension tubes are also available that allow the camera to hang further down. There is a hole in the bracket so that the cables can be easily pulled through.
Suitable for
The bracket fits several of Bosch's adapters, brackets and cameras that can be mounted on these brackets.
Examples of compatible brackets:
- NDA-U-PSMB – Pendant mounting box
- NDA-U-WMP – Wall mounting plate that can be used as a backplate for mounting the bracket directly to walls, corners or posts
- NDA-U-CMT – Corner bracket
- NDA-U-PMAL – Large post bracket that allows the bracket to be mounted on larger posts
- NDA-U-PMAS – Small post bracket suitable for smaller posts and pipes
- NDA-U-PMTE – Pipe extension (50 cm)
- Surveillance Cabinets (NDA-U-PA0/PA1/PA2) – Surveillance cabinets that provide protection for cabling and other components
Examples of compatible cameras (with the correct mount/adapter):
- AUTODOME IP 4000i – Uses a pendant interface plate (NDA-4020-PIP)
- FLEXIDOME IP 4000i / 5000i – Compatible with these cameras via pendant interface plate (NDA-5030-PIP)
- FLEXIDOME IP panoramic 7000 – User pendant interface plate (NDA-7010-PIP)
On the camera's product page, you can see which mounts are compatible under the 'Accessories' section.
