facebook

Hikvision DS-2CD2046G2-I 4MP AcuSense PoE

Model: DS-2CD2046G2-I(2.8)
1.295,00  Incl. VAT
( 1.036,00  Excl. VAT )
Availability:
2.8mm 4mm
Do you have questions about the product? +45 70701009

Small discreet bullet camera that is easily mounted on both wall, sloping wall and ceiling with the built-in arm.
With its 4 MegaPixel image sensor, the camera delivers a really good day image & with up to 40m IR, it also provides a good night image.
AcuSense allows the camera to classify people & vehicles.

Can be accessed from both smartphone, PC and tablet through the Hik-Connect app.
Supports Danish, Swedish, Norwegian, German and English languages.

  • 129,00  Incl. VAT
    ( 103,20  Excl. VAT )
  • 2.495,00  Incl. VAT
    ( 1.996,00  Excl. VAT )

    Intelligent "all-in-one" camera with sound and light - 8MP

  • 3.495,00  Incl. VAT
    ( 2.796,00  Excl. VAT )

    Intelligent camera with variable zoom

  • 5% Off
    1.470,00  Incl. VAT
    ( 1.176,00  Excl. VAT )
    1.549,00  Incl. VAT
    You save: 79,00
DS-2CD2046G2-I  
Image Sensor 1/3" Progressive Scan CMOS
Min. Illumination Color: 0.003 Lux @ (F1.4, AGC ON), B/W: 0 Lux with IR
Shutter Speed 1/3 s to 1/100,000 s
Day & Night IR cut filter
Angle Adjustment Pan: 0° to 360°, tilt: 0° to 90°, rotate: 0° to 360°
Slow Shutter Yes
P/N P/N
Wide Dynamic Range 120 dB
Lens  
Lens Type Fixed focal lens, 2.8, 4, and 6 mm optional
Focal Length & FOV

2.8 mm, horizontal FOV 103°, vertical FOV 55°, diagonal FOV 123°
4 mm, horizontal FOV 83°, vertical FOV 45°, diagonal FOV 98°
6 mm, horizontal FOV 53°, vertical FOV 28°, diagonal FOV 62°

Aperture F1.4
Lens Mount M12
Iris Type Fixed
DORI  
DORI 2.8 mm: D: 60.0 m, O: 23.8 m, R: 12.0 m, I: 6.0 m
4 mm: D: 80.0 m, O: 31.7 m, R: 16.0 m, I: 8.0 m
6 mm: D: 120.0 m, O: 47.6 m, R: 24.0 m, I: 12.0
Illuminator  
IR Range Up to 40 m
IR Wavelength 850 nm
Smart Supplement Light Yes
Supplement Light Type IR
Video  
Max. Resolution 2688 × 1520
Main Stream 50 Hz: 25 fps (2688 × 1520, 1920 × 1080, 1280 × 720)
60 Hz: 30 fps (2688 × 1520, 1920 × 1080, 1280 × 720)
Sub-Stream 50 Hz: 25 fps (640 × 480, 640 × 360)
60 Hz: 30 fps (640 × 480, 640 × 360)
Third Stream 50 Hz: 10 fps (1920 × 1080, 1280 × 720, 640 × 480, 640 × 360)
60 Hz: 10 fps (1920 × 1080, 1280 × 720, 640 × 480, 640 × 360)
*Third stream is supported under certain settings.
Video Compression Main stream: H.265/H.264/H.265+/H.264+
Sub-stream: H.265/H.264/MJPEG Third stream: H.265/H.264
*Third stream is supported under certain settings.
Video Bit Rate 32 Kbps to 8 Mbps
H.264 Type Baseline Profile/Main Profile/High Profile
H.265 Type Main Profile
H.264+ Main stream supports
H.265+ Main stream supports
  CBR/VBR
Scalable Video Coding (SVC) H.264 and H.265 encoding
Region of Interest (ROI) 1 fixed region for main stream and sub-stream
Network  
Simultaneous Live View Up to 6 channels
API Open Network Video Interface (PROFILE S, PROFILE G, PROFILE T), ISAPI, SDK
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP, ARP
User/Host Up to 32 users. 3 user levels: administrator, operator and user
Security Password protection, complicated password, HTTPS encryption, IP address filter, Security Audit Log, basic and digest authentication for HTTP/HTTPS, TLS 1.1/1.2, WSSE and digest authentication for Open Network Video Interface
Network Storage MicroSD/SDHC/SDXC card (256 GB) local storage, and NAS (NFS, SMB/CIFS), auto network replenishment (ANR) Together with high-end Hikvision memory card, memory card encryption and health detection are supported.
Client iVMS-4200, Hik-Connect, Hik-Central
Web Browser Plug-in required live view: IE 10+ Plug-in free live view: Chrome 57.0+, Firefox 52.0+ Local service: Chrome 57.0+, Firefox 52.0+
Image  
SNR ≥ 52 dB
Day/Night Switch Day, Night, Auto, Schedule
Image Enhancement BLC, HLC, 3D DNR
Image Parameters Switch Yes
Image Settings Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance adjustable by client software or web browser
Interface  
On-Board Storage Built-in micro SD/SDHC/SDXC slot, up to 256 GB
Reset Key Yes
Ethernet Interface 1 RJ45 10 M/100 M self-adaptive Ethernet port
Event  
Basic Event Motion detection (human and vehicle targets classification), video tampering alarm, exception
Smart Event Scene change detection
Deep Learning Function  
Face Capture Yes
Perimeter Protection Line crossing detection, intrusion detection, region entrance detection, region exiting detection
General  
Storage Conditions -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing)
Startup and Operating Conditions -30 °C to 60 °C (-22 °F to 140 °F). Humidity 95% or less (non-condensing)
Power Supply 12 VDC ± 25%, reverse polarity protection PoE: 802.3af, Class 3
Power Consumption and Current 12 VDC, 0.5 A, max. 6.0 W PoE (802.3af, 36 V to 57 V), 0.2 A to 0.13 A, max. 7.0 W
Power Interface Ø 5.5 mm coaxial power plug
Material ADC12
Dimension Ø 70 mm × 161.7 mm (Ø 2.8" × 6.4")
Package Dimension 216 mm × 121 mm × 118 mm (8.5" × 4.8" × 4.6")
Weight Approx. 485 g (1.1 lb.)
With Package Weight Approx. 724 g (1.6 lb.)
Linkage Method Upload to NAS/memory card/FTP, notify surveillance center, trigger recording, trigger capture, send email
Language 33 languages English, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese, Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian
General Function Anti-flicker, heartbeat, mirror, privacy mask, flash log, password reset via email, pixel counter
Software Reset Yes
Firmware Version V5.5.112
Approval  
EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 50130-4: 2011 + A1: 2014); RCM (AS/NZS CISPR 32: 2015); KC (KN 32: 2015, KN 35: 2015)
Safety UL (UL 60950-1); CB (IEC 60950-1: 2005 + Am 1: 2009 + Am 2: 2013); CE-LVD (EN 60950-1: 2005 + Am 1: 2009 + Am 2: 2013); LOA (IEC/EN 60950-1)
Environment CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006)
Protection IP67 (IEC 60529-2013)

There is no reviews yet. Be the first to write us your opinion

Add review:

Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.

På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.

Strømmen til kameraet leveres gennem netværkskablet fra enten...

  • en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
  • en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
  • en PoE-injector. Kan kun levere strøm til et kamera.

Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.

This is one of the coolest and smartest cameras on the market. The surveillance camera is from the AcuSense family from Hikvision, which means that it is particularly suitable for giving you messages on the phone of people and vehicles. As you can see in the video below, the camera's specialty is to distinguish between people, vehicles and uninteresting things. (continued during the video ...)

Video

 

About the camera
The camera can withstand sitting both inside and out, as it is IP67 approved, as long as you also mount the included membrane. An SD card can be mounted in the camera, which is opened with the included tool ( SD card (memory card not included, but can be purchased here) . There are also screws, raw plugs and a drilling template, which is easily glued to the concrete or bricks so you know exactly where you need to drill.The camera can be mounted in all directions, just like a 3-axis camera.The camera can be connected directly to your Hikvision recorder or NAS, but can also be used all alone with an SD card (memory card) .When the SD card is inserted, the camera records the video directly to the card and it can be played directly from the APP so you do not have to take it out.The camera can monitor the health of the SD card.

There are different types of AcuSense cameras, but common to them all is the designation at the end of the model number.

The model name tells what features the camera has if it ends up:

  • DS-2CDXXX6G2- I = Standard with infrared night vision
  • DS-2CDXXX6G2- IU = With infrared night vision and microphone
  • DS-2CDXXX6G2- ISU = With infrared night vision, microphone, alarm input and output
  • DS-2CDXXX6G2- ISU / SL = With infrared night vision, microphone, alarm input and output, as well as white strobe light and speaker

About the lens
The camera is available with several lenses and the lens is important for "FOV" (Field Of View) or in Danish: Viewing angle.
2.8 mm lens gives a horizontal (horizontal) FOV of 103 °, vertical (vertical) FOV 55 ° and diagonal (from corner to corner) FOV 123 °
4 mm lens provides a horizontal (horizontal) FOV of 83 °, vertical (vertical) FOV 45 ° and diagonal (from corner to corner) FOV 98 °

About AcuSense
Even though the camera is intelligent, it still needs some input from you. When the camera is mounted, you can choose between several types of "smart events" including "Detection of intrusion" where a square is drawn in the image and when a target moves into the square and stays longer than you have allowed (1 -10 seconds) your "reaction" is triggered. There are also line intersections where detectors about a "target" move across the line you have drawn. It can be both ways or just one way. It can e.g. is used for one-way roads, so that an alarm is given when driving in the opposite direction or in a driveway so that you are only notified when people arrive, but not when they leave.

See a guide in English from Hikvision here

What is a reaction? The event that is triggered when a rule is violated is called a "reaction". Depending on which model is chosen, you have different options.
Most used "reactions":

  • Push message on mobile (get a picture sent directly to your phone, of the target that has broken the rule, with a link to direct play in APP)
  • Send email (this feature should be used with caution as the mail provider may close your account for suspected spamming if too many photos are sent)
  • Flashing white light
  • Warning sound (siren or voice warning - it is also possible to record your own messages) *
  • Alarm output (open a garage door, turn on lights, send signal to your alarm system, interact with IHC, etc.

To have all functions, you must select the models where model no. Ends at ISU / SL

Most cameras in the AcuSense series are available in 4 and 8 Megapixels (2K and 4K)

If the camera is connected to a newer recorder, you can also make "combined" reactions. This means that another given rule must be broken before the "reaction" is triggered. (AND logic). In practical terms, this means that one e.g. can "combine" with an "alarm input" so that the camera only sends messages if the alarm is turned on or a motion sensor is triggered. In this way, the system can be integrated into the building's systems.

You can, among other things, use this NVR: https://ipcam-shop.dk/acusense-277/hikvision-ds-7608nxi-i2-s-8-channel-ip-acusense-nvr-p3055

The power supply for the camera is not included, as most users just use a PoE switch, but if you do not have a power supply for the camera in advance, you can choose one of the following options:

PoE Switch (recommended): https://ipcam-shop.dk/switch-52/
PoE Injector: https://ipcam-shop.dk/injector-364/
12 Volt power supply: https://ipcam-shop.dk/stroem-tilbehoer-216/stroemforsygning12v1a-p733

Fittings
The camera can be mounted directly on the wall or in the ceiling / overhang. A back box / bracket may be required if the joint cannot be behind the wall, ceiling or eaves.
If your AcuSense camera is to be mounted on a mast, you must also use a mast bracket. Model no. Of fittings and mast fittings can be seen in the data sheet.

NB: REMEMBER TO CHOOSE NETWORK CABLES IF YOU DON'T HAVE ANY BEFORE YOU HAVE TO USE TWO, ONE FAR FROM THE CAMERA AND INTO THE POE INJECTOR WHICH IS TYPICALLY INSERTED BY THE ROUTER AND ROUTER IN A ROUTER. CHOOSE CABLE!

Video

Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.

På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.

Strømmen til kameraet leveres gennem netværkskablet fra enten...

  • en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
  • en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
  • en PoE-injector. Kan kun levere strøm til et kamera.

Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.