Jablotron tilbehør

JI-112C IP Indoor / Outdoor Camera 2MP - BULLET

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

• When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
• Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
• It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

• You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
• In addition, you get a complete history available; and can at any time check this to find out what happened in the building at a particular time.

Live video

• Can be started from the MYJABLOTRON mobile app or over the internet.
• You can always check what's going on at the camera's location.
• It takes about 10 seconds to connect to the camera, with a normal internet connection.

 

JI-111C IP Indoor / Outdoor Camera 2MP - DOME

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

• When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
• Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
• It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

• You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
• In addition, you get a complete history available; and can check this at any time to find out what happened in the building at a particular time.

Live video

• Can be started from the MYJABLOTRON mobile app or over the internet.
• You can always check what's going on at the camera's location.
• It takes about 10 seconds to connect to the camera, with a normal internet connection.

 

The JA-151IR is an active infrared optical barrier detector with four "shots." It is designed to detect movement through the "shot," in the monitored area.

OPTEX has developed the barrier detector, but it is equipped with a transmitter belonging to the JABLOTRON 100. Due to the optical part of the device's four-shot, it has a high immunity to false alarms. The detector records two zones in the system, both of which periodically self-test and send status to the control panel.

 

The detector uses 4 x BAT-3V6-R20 (3 years life), el. 8 x BAT-3V6-R20 (up to 6 years of life). The batteries are sold separately.

Technical specifications

excitement	4x (8x) type LSH20 lithium batteries (3.6 V / 13 Ah)
Battery life	Up to 3 years * (6 years) * * with 120 sec power saving function
Frequency	868.1 MHz, JA-100 protocol
Range	Up to 300 m - open terrain
Mounting height	0.7 - 1.0 m
Distance between units	max. 100 m
Max. humidity	95%
IP class	IP65
Operating temperature	-20 ° C to + 60 ° C
Dimensions (HxWxD)	452x83x138 mm
Installation environment	Outdoor

The JA-152J MS II is a two-way hand transmitter in the JABLOTRON 100 series. The hand transmitter can both switch on / off an area, send an assault alarm, activate PG output and more.

The hand transmitter acts as two control panels with LED and acoustic indication of the controlled functions. With the transmitter it is possible to look at the LED when an area is connected, or open zones when connecting if the control panel is set up for it. The transmitter can notify at low battery, and is also compatible with the AC-16x multifunction relay in which it can be loaded to control its functions.

To expand the PG output pulse, you can hold down the button, whereby activation is sent every second. This can be useful when partially closing shutters, for example. It is also possible to mute button by pressing or locking the button so that you do not accidentally activate the assault alarm. By double-clicking, you can find the extended settings.

Note that the device is addressable and takes up space in the control panel, and that it is compatible with the FW LJ (MD) 60416+ control panel.

excitement	Lithium battery type CR 2032 (3.0 V / 0.2 A)
Power supply unit	C type (EN 50131-6)
Typical battery life	ca. 2 years (10 activations per day)
Communication frequency	868.1 MHz
Communication area	about 300 m (in open terrain)
Dimensions	63 × 36 × 15 mm
Operating temperature	-10 ° C to + 40 ° C
Compatible with	FW LJ (MD) 60416+ control panel; F-Link 1.4.0 or higher

JA-155J is a control unit that controls other devices, such as garage door, parking boom or the like. In addition to these functions, by using a 12V output on the third-party system / device (eg a Roger ADK system) it can also send an assault signal to the alarm center. In addition, it is also capable of wirelessly connecting / disconnecting the JA-100 system.

The unit can be loaded into AC-16x multifunction relays and control panels.

Technical specifications

excitement	12V
Spending	only when activating 10/20 mA
Frequency	868.1 MHz
Range	Approx. 50 m - open terrain
Operating temperature	-40 ° C to + 85 ° C
Dimensions	84 x 53 x 25 mm

The JA-159J is a wireless device for the JABLOTRON 100+. The button can be used to control electrical equipment, to activate an emergency alarm, or as a wireless doorbell.

Note that the device takes up space in the system

A label for the doorbell button can be printed by the printers normally used for printing area labels for JABLOTRON 100 control panels.

Technical specifications

excitement	2x CR 2032 (3 V / 0.2 Ah)
Typical battery life	ca. 5 years (outside, 3 activations a day)
Communication	868.1 MHz
Communication range	ca. 300 m - open terrain
Dimensions	70 x 30 x 20 mm (77 x 47 x 28 mm, including the cover)
IP ranking	IP65
Operating temperature	-10 ° C to + 40 ° C
Relative humidity	25 to 95%

JA-150TP is a wireless thermostat from Jablotron, which in collaboration with a programmable output module, gives full control over the temperature in the home. Via the MyJablotron app, or website, it is possible to remotely control and monitor the temperature. Here you can also see graphs of the temperature history, get reports of overheating or freezing, turn down the heat if a window is open, possibility to maintain a minimum temperature, set up a weekly calendar mode etc.

There is room for 16 thermostats per system and there is also the option of manual temperature control if desired.

excitement	2 AA Alkaline batteries (LR6) 1.5 V 2400 mAh
Battery life	Approx. 2 years
Frequency	868.1 MHz, JABLOTRON protocol
Range	Approx. 300 m - open terrain
Recommended installation height	1.5 m above the floor
Operating temperature	-10 to + 70 ° C
Accuracy in operating temperatures	0.1 ° C
Dimensions	66 x 90 x 22 mm

The JA-150G-CO is a wireless module that can be installed in an EI208W carbon monoxide detector and enables wireless connection to the JABLOTRON 100 system. The module can send information to the system, about alarm, deactivation and battery status in the detector. The module takes up one space in the system.

excitement	EI208W battery
Frequency	868.1 MHz, Jablotron protocol
Range	Up to 300 m - open terrain
Operating temperature	-10 to + 40 ° C
Dimensions	109x24x22 mm
Installation environment	Indoors

JA-188J is an assault and emergency call transmitter. However, it can also be used to control other devices e.g. opening the door, switching lights on / off or switching on / off an area, etc.

Through the control panel, it is possible to set which function you want the button to have. The default setting is either assault or on / off. The other functions can be found under units in F-link. There is also sabotage cash in the pressure and it also monitors the battery voltage.

Technical specifications

excitement	Lithium ½ AA 3.6V / 1.2 Ah
Battery life	ca. 3 years for 20 daily activations
Frequency	868 MHz
Range	ca. 300 m - open terrain
Operating temperature	-10 ° C to + 40 ° C
Dimensions	80 x 80 x 29 mm

JA-187J is an assault transmitter that can be worn as either a wristwatch or around the neck (strap included in the package).

But in addition, it can also be used to control other devices if desired.

Technical specifications

excitement	Lithium type CR 2032 (3.0V)
Battery life	ca. 3 years with 1 daily activation
Frequency	868 MHz
Range	ca. 50 m - open terrain
Operating temperature	-25 to +50 c
IP Class	IP-44

JA-118M BUS is a module with eight zone inputs, for magnetic switches. It is possible to program the zones individually, as single balanced, NC or special grid alarm;
where multiple activations are required before an alarm can be triggered. The module can be installed in the JA-190PL or KU-68 sockets.

Please note that the cable length must not exceed 100 m, between module and zone.

Technical specifications

excitement	Via central bus BUS 12 V (9 - 15 V)
Standby consumption	5mA
Maximum total standby power on connected detector	50MA
Operating temperature	-10 ° C to + 40 ° C
Dimensions	50 × 38 × 14 mm
Installation environment	Indoors