facebook
  1. Home
  2. Alarm without subscription
  3. Jablotron
  4. Accessories

Jablotron tilbehør

Jablotron JS-7904 Corridor lens for Jablotron detectors
Model: JS-7904

JS-7904 is a corridor lens for Jablotron's JA and JS PIR detectors. It has a range of 25 meters.

Also note that the lens is not compatible with Jablotron's JA-111P xx and JA-151P xx series.

By: Jablotron
Jablotron JS-7910 Pet lens for Jablotron detectors
Model: JS-7910

JS-7910 is a lens for Jablotron's JA and JS PIR detectors. The lens is for people with pets, so the PIR detector is not disturbed by the pet's movements on the floor. If you install it at a height of 2.5 meters, there will be a free area 7 cm above floor level 7 meters outside.

Please note that the lens is not compatible with Jablotron's JA-111P xx and JA-151P xx series.

By: Jablotron
Jablotron JS-7902 Curtain lens for Jablotron detectors
Model: JS-7902

JS-7902 is a curtain lens for Jablotron's JA and JS PIR detectors.

Please note that the lens is not compatible with Jablotron's JA-111P xx and JA-151P xx series.

By: Jablotron
Jablotron JA-M Magnet disk 10 x 4 mm
Model: JA-M

Magnetic disk (and associated screw) that can be used to replace the JA-81M and JA-83M included magnets, and act as a more "invisible" alternative. The magnetic disk measures 10 x 4 mm.

By: Jablotron
Jablotron BH-80A Battery holder for JA-80 / JA-180A for 5 x C 1.5V batteries
Model: BH-80A

Battery holder for 5 x C 1.5V batteries - for JA-80 / JA-180A.

By: Jablotron
Jablotron Lithium BAT-3V6-R20.01 3.6V 13 Ah for JA-80 IR / JA-150IR / JA151IR
Model: BAT-3V6-R20.01

Special battery belonging to Jablotron's outdoor IR detectors. Used in JA-150IR (4 pcs), JA-151IR (8 pcs), JA-180IR (4 pcs) and JA-80IR (4 pcs).

Technical specifications

excitement 3.6 V / 13Ah
Dimensions Ø x H 61.6 x 33.4 mm
Weight 92.0 g
By: Jablotron
Jablotron BAT-1V2-NIMH.1 Rechargeable battery for JA-120N
Model: BAT-1V2-NIMH.1

BAT-1V2-NIMH.1 is a rechargeable battery for JA-120N.

Technical specifications:
Battery type 1.2V NiMh AA BK-3MCCE 1900mAh Rechargable battery

By: Jablotron
Jablotron JA-107PWR power supply for JA-107K
Model: JA-107PWR

JA-107PWR is a spare part for Jablotron's JA-107 control panel. The power supply can replace unit in JA-107 if it should be defective.

By: Jablotron
Jablotron PLV-JA-110E Empty Plastic Housing for JA-110E / JA-150E
Model: PLV-JA-110E

Empty plastic housing that can be used for JA-150 control panel.

By: Jablotron
Jablotron Alkaline C Battery (U-LR14) for JA-80A / 180A
Model: U-LR14

An alkaline LR14 C 1.5V battery.

By: Jablotron
Jablotron USB card reader SE 1220 MNP readID
Model: SE 1220 MNP

This USB card reader makes registering RFID cards, in access control software, easy.

All you have to do is connect the card reader to a PC via USB (2.0) after which the required driver is automatically loaded (Windows, MAC OS & Linux).

If an access card or chip is registered on the card reader, the data information will be transferred to the PC as keyboard data.
The card reader can be used for both Mifare and EM, as it contains both 13.56 Mhz and 125kHz readers.
It allows integration with existing software where data is usually loaded into the system.

The card reader supports these encryptions: Crypto1 for MIFARE Classic and 128 Bit AES DESfire EV1 / 2/3.

The card reader also has pre-programmed settings for the following systems:

Jablotron JA-100 - 125kHz EM (Not Jablotron's own chips)

Roger - 125Khz EM

Roger Mifare - RTO

Roger Racs5 - 125kHz EM

Roger Racs5 - Mifare

Satellite Integra

UniLock

Technical specifications
Dimension 89 x 57 x 12 mm (lx W x H)
Color Black
Connection USB A connector fixed cable - USB 2.0 interface
Cable Fixed cable / 1.8 m / Black - Option for 0.5 m Cable
By: Jablotron
PS PSU 6 (13805 NB) Power supply 12V / 5.0 A
Model: PS PSU 6
  • Universal Switch Mode power supply
  • Mains voltage indicator
  • Error indicator
  • Sabotage protection
By: IPC
Jablotron Cable, 12 conductor Soft cable 100 m pr. roll
Model: Jablotron 12 leder

100 meter copper cable from QCR, which is made in England. Each conductor contains 7 wires of annealed tinned copper wire, which is protected by type 1 PVC. This type of cable is optimal for installations where you want good signal quality. In addition, the cable is user-friendly and is both flexible and easy to strip if desired.

 

Technical specifications

Threads 7 x 0.182
Material in conductors Soft tinned copper
Resistance value 94.6 Ohm / Km
Leather 0.182mm2
Voltage value 1 Amp
Max. volt 50V
Shielding of conductors PVC TI.1
Cable material PVC Type 6
Working temperature 70 degrees C

By: Jablotron
Jablotron Cable, 4 conductor Soft cable 100 m pr. roll
Model: 4 leder kabel

100 meter copper cable from QCR, which is made in England. Each conductor contains 7 wires of annealed tinned copper wire, which is protected by type 1 PVC. This type of cable is optimal for installations where you want good signal quality. In addition, the cable is user-friendly and is both flexible and easy to strip if desired. It is available in either white or brown.

 

Technical specifications

Threads 7 x 0.182
Material in conductors Soft tinned copper
Resistance value 94.6 Ohm / Km
Leather 0.182mm2
Voltage value 1 Amp
Max. volt 50V
Shielding of conductors PVC TI.1
Cable material PVC Type 6
Working temperature 70 degrees C

By: Jablotron
499,00  Incl. VAT
( 399,20  Excl. VAT )
To Top