Jablotron USB card reader SE 1220 MNP readID

All you have to do is connect the card reader to a PC via USB (2.0) after which the required driver is automatically loaded (Windows, MAC OS & Linux).

If an access card or chip is registered on the card reader, the data information will be transferred to the PC as keyboard data.
The card reader can be used for both Mifare and EM, as it contains both 13.56 Mhz and 125kHz readers.
It allows integration with existing software where data is usually loaded into the system.

The card reader supports these encryptions: Crypto1 for MIFARE Classic and 128 Bit AES DESfire EV1 / 2/3.

The card reader also has pre-programmed settings for the following systems:

Jablotron JA-100 - 125kHz EM (Not Jablotron's own chips)

Roger - 125Khz EM

Roger Mifare - RTO

Roger Racs5 - 125kHz EM

Roger Racs5 - Mifare

Satellite Integra

UniLock