Network cables with connectors

Which Length Should I Choose?

Measure the entire route the cable will follow – not just the direct distance between the two devices. Remember to allow for corners, cable trays and routing along walls.

We recommend choosing a cable that is slightly longer than the measured distance. This provides enough slack for connecting and repositioning your equipment without putting the cable under tension.

For short connections inside a rack or between a switch and a network video recorder (NVR), a cable between 0.25 and 2 metres is often sufficient. For cameras and equipment located further away, choose one of the longer cable lengths.

Standard or Shielded Network Cable?

A standard unshielded network cable is suitable for most installations in homes and small businesses.

A shielded network cable provides additional protection against electrical interference. It can be beneficial in equipment cabinets or installations where the cable is routed close to many other cables or electrical equipment.

If you're unsure, a standard Cat6 network cable is usually the simplest choice.

Network Cable for PoE Cameras

Many surveillance cameras use Power over Ethernet (PoE), meaning that both power and network connectivity are supplied through the same network cable.

If the cable will be used for a PoE camera, choose a cable that is specified as suitable for PoE. For longer cable runs, cable quality and conductor material are especially important.

Will the Cable Be Used Outdoors?

A standard indoor network cable should not be permanently installed outdoors. Sunlight, moisture and temperature changes can eventually damage the cable jacket.

For outdoor installations, choose a network cable that is specifically designed for outdoor use and features a UV-resistant jacket.

If you need cable without pre-installed connectors for a permanent installation, take a look at our installation cables on reels.

If you are still unsure which network cable to choose, feel free to contact us.