Cat6 S/FTP Shielded Network Cable - Red
CAT 6 S/FTP patch cable with double shielding, RJ45 connectors and data speeds of up to 1 Gbit/s.
- CAT 6 network cable
- Data speed up to 1 Gbit/s
- Bandwidth up to 250 MHz
- Double-shielded S/FTP construction
- RJ45 male connectors at both ends
- Gold-plated contacts
- CCA conductors
- AWG 27/7
- PVC cable jacket
- Red
With this CAT 6 S/FTP network cable, you get a stable connection between computers, routers, switches, patch panels, NAS devices, IP cameras and other network equipment. The double shielding reduces the impact of electrical noise and makes the cable suitable for installations where greater signal stability is required.
| Technical specifications | |
| Model | CAT 6 Patch Cable S/FTP (PiMF) Red |
| Product type | CAT 6 Ethernet patch cable |
| Category | CAT 6 |
| Shielding | S/FTP (PiMF), double shielded |
| Connector 1 | RJ45 male (8P8C) |
| Connector 2 | RJ45 male (8P8C) |
| Contact wiring | EIA/TIA-568B |
| Connector contacts | Gold-plated |
| Connector shielding | Shielded |
| Latch protection | Yes, on both connectors |
| Bend protection | Yes, on both connectors |
| Conductor material | Copper (CU) |
| Conductor size | AWG 28/7 stranded |
| Cable type | Round cable |
| Cable jacket | LSZH (Low Smoke Zero Halogen) |
| Cable diameter | Approx. 6 mm |
| Maximum bandwidth | 250 MHz |
| Maximum transmission speed | 10 Gbit/s (10/100/1000/10000 Mbit/s) |
| PoE support | Yes, suitable for PoE and PoE+ |
| Operating temperature | -20 °C to +65 °C |
| Colour | Red |
| Certifications | CE, WEEE |
| Package contents | 1 × CAT 6 S/FTP (PiMF) Patch Cable |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
CAT 6 cable with double shielding
The cable supports Gigabit Ethernet with data speeds of up to 1 Gbit/s and a bandwidth of up to 250 MHz.
The S/FTP construction provides extra protection against electromagnetic interference and crosstalk between the conductor pairs.
Patch cable for network equipment
The cable is used to connect network equipment with RJ45 ports. It can be used, among other things, between routers, switches, patch panels, network recorders, computers, access points, NAS devices and IP cameras.
The pre-mounted RJ45 connectors make the cable ready to use without fitting connectors or using special tools.
S/FTP shielding
S/FTP means that the cable has both an overall braided shield around all conductor pairs and individual foil shielding around each twisted pair.
This reduces the impact of electromagnetic noise and makes the cable suitable for technical rooms, server rooms and installations where network cables are routed close to other electrical equipment.
Gigabit Ethernet
The cable supports data speeds of up to 1 Gbit/s.
It can be used for general network traffic, video surveillance, IP telephony, file transfers and streaming.
Bandwidth of 250 MHz
The CAT 6 standard supports a bandwidth of up to 250 MHz.
This provides the capacity needed for standard network installations with Gigabit Ethernet.
RJ45 connectors with gold-plated contact surfaces
Both ends are fitted with RJ45 male connectors with gold-plated contact surfaces.
The gold plating helps ensure a stable electrical connection and helps protect the contact surfaces against corrosion over time.
Latch protection
The RJ45 connectors have protection around the latch as well as strain relief at the cable entry.
This reduces stress on the connector and lowers the risk of the latch being damaged during installation or use.
CCA conductors
The internal conductors are made of copper-clad aluminium, also called CCA.
For installations with high PoE loads or special requirements for permanent cabling, you should check whether a cable with pure copper conductors is required.
PVC cable jacket
The cable has a PVC jacket that protects the internal conductors against normal mechanical stress.
This construction makes the cable suitable for indoor network installations.
Green color for cable identification
The green color makes it easy to distinguish the connection from other network cables.
This can be an advantage in rack cabinets, technical rooms and larger installations where different networks or functions are to be color-coded.
Suitable for many types of network equipment
- Routers
- Network switches
- Patch panels
- Computers
- NAS devices
- IP cameras
- Network recorders
- Access points
- Printers
- Smart TVs
- Game consoles
Compatibility
The cable can be used with network equipment that has RJ45 Ethernet ports.
The actual data speed depends on the connected equipment and the overall installation.
Technical key points
- Product type: CAT 6 network cable
- Shielding: S/FTP
- Connector 1: RJ45 male
- Connector 2: RJ45 male
- Contact plating: Gold-plated
- Contact standard: EIA/TIA 568B
- Maximum data speed: 1 Gbit/s
- Bandwidth: Up to 250 MHz
- Conductor material: CCA
- Conductor size: AWG 27/7
- Cable jacket: PVC
- Strain relief: Yes
- Latch protection: Yes
- Color: Red
