Jablotron tilbehør

With a JA-111R module you can connect wireless devices, e.g. detectors. The maximum number of radio modules for installation in the system is three. The module is supplied from the control panel's BUS, and also communicates through this.

Note that the device is addressable and takes up space in the control panel.

The task of the JA-111H-AD TRB BUS module is to control the JABLOTRON 100 system by controlling programmable PG outputs. It must be installed in an external device that has either a switch or pulse function in order to be able to control switching on and off. The unit is supplied with power through the BUS. It is possible to integrate the built-in module, directly with the control panel. The module inputs have different functions: the first is an anti-tampering alarm, the second for standard functions and the third for the same, but can be set to report faults on the equipment if you prefer. The unit has a delay setting that controls how long the input must be active before the alarm is triggered (from 0.1 to 300 sec). It reduces the chance of false alarms.

Technical specifications

JA-156J is a wireless and multifunctional panic button / assault press, from Jablotron. It is made to be able to activate a panic alarm if you are in a situation where it is needed.

You configure the device activation modes through F-Link after registering the device with the system. Activation of alarm can be done with hand, foot or knee. In addition, it can detect valuable documents and cash, and is able to confirm the presence of a person (variable hours).

The device is compatible with the JA-103K and JA-107K control panels.

The JA-120N is a "high-power" output module that supplies the output with extra voltage without affecting the BUS of the system. The module can thus be used to pull an end plate or an electric lock. The unit contains batteries that ensure that the voltage pulse of the output is sufficient to pull the lock. The module can be used in places where it is not possible to externally supply the electric lock with power.

The unit is activated with terms connected to the IN input or with PG output signal from the control panel.

Note that the module is addressable and takes up space in the system.