facebook
Model: JA-110B

JA-110B BUS is a glass break detector that is supplied and communicates through the control panel's BUS. It detects broken glass with its dual detection technology that analyzes air pressure and sound. The sensitivity of the device is adjustable and it also has SMARTMEMORY function that provides LED indication of alarm. The function can be switched off if you prefer.

The detector takes up one space in the control panel.

Technical specifications

Voltage via the control panel'S BUS 12 V (9-15 V)
Standby consumption 5 mA
Recommended installation height 2.5 m above the floor
Coverage area up to 9 m
Minimum window glass size 0.6 x 0.6 m
Stabilization time after ignition max 60 s
Dimensions 40 x 100 x 22 mm
Environment Indoors In accordance with EN-50130-4, EN 55022
Operating temperature range -10 ° C to + 40 ° C
Model: JA-111SH

JA-111SH BUS is made to detect vibrations on doors / windows, caused by an external attempt to force itself through. It is possible to adjust the sensitivity of the detector, depending on the subject that requires protection. The detector has a tilt function so that it can also be used to secure works of art or safes, and can easily be mounted on things that must not be taken down without an alarm. You choose whether you want to use the device as a vibration detector or tilt detector, with a jumper.

Technical specifications

Voltage via the control panel'S BUS 12 V (9 - 15 V)
Standby consumption 5 mA
Power consumption for cable selection 5 mA
Operating temperature -10 ° C to + 40 ° C
Dimensions 55 x 27 x 16 mm
Installation environment Indoors
Model: JA-152NM

The JA-152NM is a wireless module that can be used to lock a door or window when the alarm is switched on, which it does by following a PG output integrated in a mechanical lock. For optimal operation, the handle must be locked in its normal position. However, the lock is not certified as an electronic security detector.

A magnetic switch built into the module can monitor whether the door / window is open or closed - it does not detect burglary. In addition, the module has an optional function that can unlock automatically in the event of a fire alarm from a detector. Remember to check if the door / window is suitable for the unit before installation.

The module is addressable and takes up a space in the control panel.

Please note that it only works with firmware 18 and F-link 1.4.0 or later and is only used for the JABLOTON 100 system.

Technical specifications
excitement 2 AA Alkaline batteries (LR6) 1.5 V 2400 mAh
Battery life ca. 2 years (1 lock and unlock per day)
Frequency 868.1 MHz Jablotron protocol
Range ca. 300 m - open terrain
Dimensions 229 x 34 x 18 mm
Operating temperature -20 ° C to + 60 ° C
Installation environment Indoors
Model: JA-152M

JA-152M is a wireless "invisible" magnetic switch that tells about opening either door or window. The magnet is mounted in the window / door and the transmitter in the frame. This means that you have an invisible / discreet installation. The magnetic switch fits the EURO standard windows.

Please note that the magnetic switch can only be used with the control panels JA-103 and JA-107.

Technical specifications

excitement Lithium type BAT-3V0-CR2032
Battery life about 3 years at 5 daily activations
Frequency 868 MHz
Range ca. 200 m - open terrain
Operating temperature -10 to +40 c
Dimensions 192 x 25 x 9 mm
Installation environment Indoors
Model: JA-183M

JA-183M is a small wireless magnetic switch, for doors and windows, which detects when opened. It works by removing a magnet from the transmitter when the door or window is opened. When the detector is activated, it can either start an entry time or send an alarm immediately.

Note that the detector has no input for external devices

Technical specifications

Supply voltage Lithium type CR-123 (3.0V)
Battery life ca. 3 years for 20 daily activations
Frequency 868 MHz
Range ca. 300 m - open terrain
Dimensions house 75 x 31 x 23 mm
Dimensions magnet housing 56 x 16 x 15 mm
Dimensions magnet 10 x 4 mm
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
Model: JA-182M

JA-182M is a wireless and almost invisible magnetic contact, which tells you if something (door or window) opens. The almost "invisible" magnet is mounted in the window / door, and the transmitter is mounted in the frame. This gives you a discreet installation. The magnetic switch fits in the EURO standard windows.

Technical specifications

Supply voltage Lithium type CR 2354 (3.0V)
Battery life about 3 years at 5 daily activations
Frequency 868 MHz
Range ca. 200 m - open terrain
Operating temperature -10 to +40 c
Dimensions 192 x 25 x 9 mm
Model: JA-185B

The JA-185B is a mini wireless glass break detector that can also be nicely installed in a car. It can detect broken glass within a radius of 9 meters. This is done by analyzing the air pressure in the room. If a change occurs at the same time as the sound of glass being smashed, it activates an alarm. To prevent false alarms, the detector uses digital signal processing.

Technical specifications

excitement Lithium type LST14505 (3.6V AA)
Battery life about 3 years (5 min sleeping mode)
Frequency 868 MHz
Range ca. 100 m - open terrain
Coverage Up to 9m
Mode of operation Acoustic
Operating temperature -10 ° C to + 55 ° C
Dimensions 46 x 88 x 22 mm
Installation environment Indoors
Model: JA-180B

JA-180B is a mini wireless acoustic glass break detector, to mount on a flat surface that can detect glass break within a radius of nine meters. In addition, the detector also analyzes the air pressure in the room. A change of this, along with the sound of glass being smashed, activates an alarm. To reduce the risk of false alarms, it uses the digital signaling process. In addition, this detector has a high degree of immunity to RF jamming and the like. The device's detection sensitivity can be easily adjusted according to the distance and dimensions of the windows that require protection.

 

Technical specifications

excitement Lithium type LST14505 (3.0V AA)
Battery life ca. 3 years (5 min sleeping mode)
Frequency 868 MHz
Range ca. 100 m - open terrain
Coverage Up to 9m
Mode of operation Acoustic
Dimensions 107 x 28 x 24 mm
Installation environment Indoors
Model: JI-112C

JI-112C IP Indoor / Outdoor Camera 2MP - BULLET

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

  • When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
  • Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
  • It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

  • You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
  • In addition, you get a complete history available; and can at any time check this to find out what happened in the building at a particular time.

Live video

  • Can be started from the MYJABLOTRON mobile app or over the internet.
  • You can always check what's going on at the camera's location.
  • It takes about 10 seconds to connect to the camera, with a normal internet connection.

Technical specifications

Power supply 12 V DC alternatively from the data connection PoE 802.3 of (48V)
Daytime power consumption (in standby mode) 200 mA
Power consumption at night (with IR lighting) 350 mA
Number of pixels 2 Mpix
Camera image resolution 1920 * 1080 pixels
Camera lens Bullet 4 mm (viewing angle 90 °)
Lens type Mono
Sensor 1 / 2.8 "CMOS
Lens rotation settings 0 ° -355 °
Communication interface RJ-45 10M / 100M Ethernet
IR illumination angle 70 °
IR lighting range max. 50 meters (12x IR LED)
Surroundings IV. generally outdoors (according to the ČSN EN 50131-1 standard)
Operating temperature range Dome From -20 to + 55 ° C, max. humidity 75%
Dimensions 300 x 90 x 90 mm
Weight 500 g
 
Model: JI-111C

JI-111C IP Indoor / Outdoor Camera 2MP - DOME

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

  • When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
  • Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
  • It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

  • You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
  • In addition, you get a complete history available; and can check this at any time to find out what happened in the building at a particular time.

Live video

  • Can be started from the MYJABLOTRON mobile app or over the internet.
  • You can always check what's going on at the camera's location.
  • It takes about 10 seconds to connect to the camera, with a normal internet connection.

Technical specifications

Power supply 12 V DC alternatively from the data connection PoE 802.3 of (48V)
Daytime power consumption (in standby mode) 200 mA
Power consumption at night (with IR lighting) 350 mA
Number of pixels 2 Mpix
Camera image resolution 1920 * 1080 pixels
Camera lens Dome 2.8 mm (viewing angle 115 °)
Lens type Mono
Sensor 1 / 2.8 "CMOS
Lens rotation settings 0 ° -355 °
Communication interface RJ-45 10M / 100M Ethernet
IR illumination angle 70 °
IR lighting range max. 30 meters (12x IR LED)
Installation environment IV. generally outdoors (according to the ČSN EN 50131-1 standard)
Operating temperature range Dome From -20 to + 55 ° C, max. humidity 75%
Dimensions 111 x 111 x 82 mm
Weight 500 g
 
Model: JA-157P

JA-157P is a wireless outdoor detector with curtain lens, from Jablotron. The device is capable of detecting human movement outside the building. It does this via a dual-zone outdoor detector, with a 5 ° detection angle, made by OPTEX. The unit is suitable for narrow places, such as balconies, shafts or doorways.

The detector due to its dual-PIR system, a high degree of immunity to false alarms. In addition, it has three tamper switches and is equipped with anti-mask function.

The unit also has a built-in transmitter for the JABLOTRON 100 system.

Note that this detector is a replacement for the JA-187P.

Technical specifications

excitement 1x type CR123A (3 V / 1500 mAh) lithium battery
Battery life up to 3 years (with 120 sec. power saving function)
Frequency 868.1 MHz, JA-100 protocol
Range up to 300 m - open terrain
Mounting height 0.8 - 1.2 m
Coverage area 2 or 5 m / 5 °
The speed of movement of the object 0.3 - 1.5 m / sec
Max. humidity 95%
Operating temperature -20 ° C to + 60 ° C
Dimensions 34 x 154 x 43 mm
Installation environment Outdoor
Model: JA-158P

JA-158P is designed to detect human movement in a monitored outdoor area. It does so with its dual-zone PIR sensor made by OPTEX. However, the transmitter is by Jablotron. The PIR sensors have non-overlapping 94-zone detection, thus avoiding disturbing detections of small animals. The device's power is supplied by lithium batteries, and the detector can even find out to report low battery status to the control panel.

The device has both anti-mask function and a tamper switch on both the front and back, which can notify you if the device is removed from the wall or if the front is removed.

The detector periodically performs self-tests and forwards the results to the control panel.

Technical specifications

excitement 3 pieces. Lithium type LS (T) 14500 (AA 3.6V 2000 mAh) or 3 CR123A
Battery life Up to 3 years with two batteries and up to 4 years with 3 (120 sec. Sleep mode)
Frequency 868 MHz
Range Up to 300 m - open terrain
RF strength <10 mV
Mounting height 2.5 - 3.0 m
Coverage area 12 m / 85 ° (94 segments)
Battery saving function Either 5 or 120 sec.
LED indicator Only in test mode
Humidity 95%
Operating temperature -20 ° C to + 60 ° C
Closeness IP55
Installation environment Outdoor
Model: JA-151IR

The JA-151IR is an active infrared optical barrier detector with four "shots." It is designed to detect movement through the "shot," in the monitored area.

OPTEX has developed the barrier detector, but it is equipped with a transmitter belonging to the JABLOTRON 100. Due to the optical part of the device's four-shot, it has a high immunity to false alarms. The detector records two zones in the system, both of which periodically self-test and send status to the control panel.
 
The detector uses 4 x BAT-3V6-R20 (3 years life), el. 8 x BAT-3V6-R20 (up to 6 years of life). The batteries are sold separately.

Technical specifications

excitement 4x (8x) type LSH20 lithium batteries (3.6 V / 13 Ah)
Battery life Up to 3 years * (6 years) * * with 120 sec power saving function
Frequency 868.1 MHz, JA-100 protocol
Range Up to 300 m - open terrain
Mounting height 0.7 - 1.0 m
Distance between units max. 100 m
Max. humidity 95%
IP class IP65
Operating temperature -20 ° C to + 60 ° C
Dimensions (HxWxD) 452x83x138 mm
Installation environment Outdoor
Model: JA-1X1A-C-ST

JA-1X1A-C-ST is a brushed steel lid with red strobe. The lid fits Jablotron's JA-111A, JA-151A and JA-163A.

 

Technical specifications

Color Silver / stainless
The color of the signal mask Red
Weight 1.01 kg
Dimensions 200 x 300 x 61 mm
Model: JA-1X1A-C-GR

JA-1X1A-C-GR is a plastic cover for JA-111A, JA-151A and JA-163A. The lid is gray with a red strobe.

Technical specifications

Weight 0.65 kg
Dimensions 200 x 300 x 61 mm
Model: JA-152A

JA-152A is a wireless siren from the JABLOTRON 100+ system, designed to indicate alarms inside. However, the siren can be used for other acoustic indications, such as activation of PG outputs, input / output time or as a doorbell (which can be set to four different tones)

The siren is equipped with a button that can be pressed if you want to silence it, or activate an emergency alarm. In the event of a power failure, the siren has a backup battery, and then it also has a tamper sensor that tells if it is removed from the outlet.

Technical specifications

excitement 230 V / 50 Hz, fuse class II
Battery / life 3.2 V, 400 mAh (BAT-3V2-CR2) / 3 years
Frequency 868.1 MHz
Communication range ca. 300 m - open terrain
Sound (melodies) 8 optional sounds for sound indication for PG outputs
Alarm sound level 105 dB / 1 m
Dimensions 90 x 70 x 45 mm
IP class IP40
Operating temperature -10 ° C to + 40 ° C
Model: JA-152J-MS II

The JA-152J MS II is a two-way hand transmitter in the JABLOTRON 100 series. The hand transmitter can both switch on / off an area, send an assault alarm, activate PG output and more.

The hand transmitter acts as two control panels with LED and acoustic indication of the controlled functions. With the transmitter it is possible to look at the LED when an area is connected, or open zones when connecting if the control panel is set up for it. The transmitter can notify at low battery, and is also compatible with the AC-16x multifunction relay in which it can be loaded to control its functions.

To expand the PG output pulse, you can hold down the button, whereby activation is sent every second. This can be useful when partially closing shutters, for example. It is also possible to mute button by pressing or locking the button so that you do not accidentally activate the assault alarm. By double-clicking, you can find the extended settings.


Note that the device is addressable and takes up space in the control panel, and that it is compatible with the FW LJ (MD) 60416+ control panel.

Technical specifications
excitement Lithium battery type CR 2032 (3.0 V / 0.2 A)
Power supply unit C type (EN 50131-6)
Typical battery life ca. 2 years (10 activations per day)
Communication frequency 868.1 MHz
Communication area about 300 m (in open terrain)
Dimensions 63 × 36 × 15 mm
Operating temperature -10 ° C to + 40 ° C
Compatible with FW LJ (MD) 60416+ control panel; F-Link 1.4.0 or higher
Model: JA-194J-BK

JA-194J-BK is a black PROX piece in leather that fits Jablotron's JA-100 system.

Technical specifications
Frequency Jablotron unique code
To Top