facebook
Model: JA-112P

JA-112P BUS PIR is a detector from Jablotron that detects movement indoors and covers up to 12 m at 90 °.

It can be mounted in the corner of the room or on the wall, as usual, but in addition you also have the option of installing it at a special angle or from the ceiling with the JA-191PL bracket. Pga. the detector's design is suitable for environments where aesthetics are important.

It has a number of smart features. First, the detector has improved alarm reporting and longer battery life due to the device's SMARTWATCH function. In addition, it has pulse function, the ability to choose between two levels of false alarm immunity and can be used to control PG outputs. Its white light immunity is standard (6,000 lux)

Please note that it is compatible with F-Link 1.4.0 or later, and takes up space in the control panel - as it is addressable.

Technical specifications

Compatible with F-Link 2.0.0 and higher
Voltage from the central bus 12 V (9 ... 15 V)
Power consumption in standby mode 3 mA
Power consumption with cable 11 mA
Recommended installation height 2.5 m above the floor
Detection angle / coverage 90 ° / 12 m
Dimensions 62 x 110 x 40 mm
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
Model: JA-120PC (90)

JA-120PC (90) is a BUS PHOTOPIR detector from Jablotron, with a coverage of 90 ° / 12m. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

The image is taken first in low resolution (320x240 pixels) and then in high resolution (640 × 480 pixels). If it is dark, the camera uses the built-in flash. The images are stored on the detector's internal micro SD card and the low-resolution image is then sent on to the control panel. From here it can be forwarded to an external server, user or KC.

If you want to see the pictures, F-Link or J-Link can be used. They can be found in the event log in low resolution, but if you click on details you can find the image in higher resolution.
In addition, you also have the option of having the image sent to you directly from MyJablotron web self-service.

The detector can also be set up to take a pre-alarm picture, whereby it can send a picture either at input time or while only one alarm has gone off.

Immunity to false alarms can be set to two levels. Either rapid reaction + basic immunity, or slower reaction + higher immunity.

Technical specifications

excitement via central BUS: 12 V (9 to 15 V)
Coverage PIR 55 ° / 12 m (with standard lens)
Mode of operation Passive infrared
Memory Micro SD
SD card size 1GB to 2GB
Operating temperature -10 ° C to + 40 ° C
Dimensions 60 x 110 x 55 mm
Installation environment Indoors

Note that the detector is only compatible with F-Link 1.5.1 or later.

Technical specifications

Supply voltage via central BUS 12 V (9 to 15 V)
Standby power consumption 5 mA
Max power consumption 250 mA (with high flash intensity)
Recommended installation height 2.5 m above the floor
PIR detection angle / detection coverage 90 ° / 12 m
Horizontal camera shooting angle 90 °
The range of the flash max. 3 meters
Camera resolution LQ 320x240; HQ 640x480 pixels
Photo size LQ / HQ (typical) 2-20 KB / 2-64 KB (6 KB / 35 KB)
Typical (LQ) photo transmission time to the control panel up to 20 s. (10 s)
Ideal (HQ) photo transmission time for the control panel up to 130 s (60 s)
Typical photo transfer time to the server 15 s / GPRS; 2 s / LAN
Dimensions, weight 110 x 60 x 55 mm, 102 g
Operating temperature range -10 ° C to + 40 ° C
Working environment according to EN 50131-1, II indoors
Model: JA-160PC (90)

The JA-160PC (90) is used to detect human movement in a room and have it confirmed with an image.
In case of alarm, the camera takes pictures in color, with a coverage of 90 ° / 12m. The image is taken in color and taken twice first in low (320x240 pixels), and then in high resolution (640 × 480 pixels). The camera can also take pictures in the dark, as it is equipped with flash. Once the pictures are taken, they are saved on the camera's internal micro SD card, and afterwards the image, low resolution, is sent on to the control panel.

The pictures can be seen in the event log, by using F-link or J-link. However, they are displayed in low resolution. If you want to see the image in higher resolution, it can be found under "details." It is also possible to send the images on from the exchange, to an external server, user or KC. It is also possible to send a picture from the MyJablotron website.

In addition, the detector can also take a picture when activating a PG output, due to fire, water damage or the like.

The detector can also be set up to take a pre-alarm picture, whereby a picture is sent at input time or if only one alarm has gone off.

It is possible to set the camera's immunity to false alarms on two levels. Either you can choose fast reaction time and basic immunity, otherwise you can choose a slower reaction time but with a higher degree of immunity.

Only compatible with F-Link 1.5.1 or later

Technical specifications

excitement 2 × AA 1.5 V Alkaline batteries
Battery life ca. 2 years (one picture per day, good light conditions)
Frequency 868 MHz ranges approx. 300 m - open terrain
Coverage PIR 55 ° / 12 m / mounted at 2.5 m height
Mode of operation Passive infrared
Memory Micro SD - SD card size 1GB to 2GB
Operating temperature -10 ° C to + 40 ° C
Dimensions 60 x 110 x 55 mm
Installation environment Indoors
Model: JA-150M

The JA-150M is a wireless magnetic switch / universal detector used for doors and windows and has two zones.

When the magnet is removed from the transmitter, the detector is activated, which either starts an alarm or activates the entry time. The magnet can be placed on either the right or left side. There is a tamper switch built into the detector that gives an alarm if someone tries to remove or open the device. The detector also works in interaction with other external devices (NO / NC), it can e.g. be a water damage detector or a key box.

Note that the detector occupies two slots in the system by default, unless zone 2 is not to be used, whereby it can be deleted in F-Link.

Technical specifications
excitement 1 Alkaline batteries AA 1.5 V
Battery life ca. 2 years for 20 daily activations
Frequency 868 MHz
Range ca. 300 m - open terrain
Magnetens GAB 45/25 mm
Cable length for external detectors max 3 meters
Dimensions house 109 x 24 x 22 mm
Dimensions magnet housing 55 x 16 x 16 mm
Dimensions magnet 10 x 4 mm
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
Model: JA-182SH

JA-182SH is a vibration and tilt detector that detects vibrations if someone tries to force their way in through doors or windows. To avoid false alarms, the detector uses digital signal processing, and in addition you can adjust the sensitivity yourself, depending on how and how you want to use it.

It also has a tilt function so you can monitor designer furniture or the like. You can choose whether it should act as a vibration detector or tilt detector in the situation, with a jumper. The detector can also easily be mounted on things that must not be able to be taken down without an alarm being sounded. This is useful if you want to secure safes, works of art, etc.

Technical specifications

Supply voltage Lithium type CR-123
Battery life ca. 2 years (5 min sleeping mode)
Frequency Jablotron 868 MHz
Range ca. 300 m - open terrain
Operating temperature -10 ° C to + 40 ° C
Dimensions 75 x 31 x 26 mm
Installation environment Indoors
Model: JA-110A

JA-110A is an indoor BUS siren that provides sound during alarm, entry and exit time and PG activation. The siren has a button that can be programmed via F-Link. It is supplied and communicates through the central bus.

The unit is addressable and takes up space in the control panel.

Technical specifications

excitement via the control panel's BUS 12 V (9 - 15 V)
Gsn. Standby consumption 10 mA
Siren piezoelectric, 85 dB / m (± 5 dB / m)
Dimensions 80 x 80 x 35 mm
Operating environment according to EN 50131-1 II. Indoor general
Operating temperature range -10 to + 40 ° C
Model: JA-163A

JA-163A RB is a siren that belongs to the JABLOTRON-100 alarm system. The device is wireless and does not require any external power supply as it is powered by a lithium battery. The siren is used as an indication of an alarm, in an outdoor environment. The unit consists of three different components, which are delivered separately, a JA-163A-BASE-RB with the electronic parts, a BAT-100 lithium battery and then a cover from the JA-1X1A-C-xx series, which is available in different colors and designs.

 

Lids are available in the following three colors: white plastic, gray plastic and brushed steel. All three have red strobes.

The device takes up space in the system.

Technical specifications

excitement Lithium battery 3.6 V / 13 Ah type BAT-100A, BAT-100A.01 (up to 2 batteries can be used)
Current consumption (nominal / maximum) 0.3 / 1000mA
Battery low voltage ≤ 2.8 V
Typical battery life ca. 5 years (for basic settings)
Frequency 868.1 MHz, JABLOTRON protocol
Range ca. 300 m - open terrain
Piezo electric siren 100 dB / m
Dimensions 200 x 300 x 70 mm
Weight 434 g
Operating temperature -20 to + 60 ° C
Operating humidity 75% (95% 30 days) RF, non-condensing
IP class IP44
Installation environment Outdoor
Model: JA-190T

The JA-190T is a PROX card and chip reader. With the reader, it is easy to load both chips and cards into the JA-100 system. This is done through F-Link and J-Link.

Model: JA-182J

The JA-182J is a childproof hand transmitter used for remote control of the JA-100 alarms. With the transmitter you can both activate and deactivate alarms, send assault alarms, monitor battery voltage and be notified of low battery to the control panel.

Technical specifications

excitement Lithium battery type CR 2032 (3.0 V)
Battery life ca. 4 years (5 daily activations)
Frequency 868 MHz
Range ca. 30 m (open area)
Operating temperature -10 ° C to + 40 ° C
Work environment Indoor use
Model: JA-156J

JA-156J is a wireless and multifunctional panic button / assault press, from Jablotron. It is made to be able to activate a panic alarm if you are in a situation where it is needed.

You configure the device activation modes through F-Link after registering the device with the system. Activation of alarm can be done with hand, foot or knee. In addition, it can detect valuable documents and cash, and is able to confirm the presence of a person (variable hours).

The device is compatible with the JA-103K and JA-107K control panels.

Technical specifications
Power 2 x alkaline batteries, type LR03 (AAA) 1.5 V / 1.2 Ah Important: Batteries are not included in the packaging (PS type C according to EN 50131-6)
Typical battery life ca. 3 years (if activated 3x a day)
Resting power consumption 20 μA
Maximum power consumption 40 mA
Voltage at low battery condition <2.3 V
Communication frequency 868.1 MHz, Jablotron protocol
Maximum Radio Frequency Output (ERP) 5 mW
Communication range ca. 300 m (open area)
Enclosure class IP 22
Operating temperature range -10 ° C to + 40 ° C
Dimensions (with mounting platform) 66 x 22 x 122 mm
Weight (without batteries) 88 g
Model: JA-120N

The JA-120N is a "high-power" output module that supplies the output with extra voltage without affecting the BUS of the system. The module can thus be used to pull an end plate or an electric lock. The unit contains batteries that ensure that the voltage pulse of the output is sufficient to pull the lock. The module can be used in places where it is not possible to externally supply the electric lock with power.

The unit is activated with terms connected to the IN input or with PG output signal from the control panel.

Note that the module is addressable and takes up space in the system.

Technical specifications
Power supply via alarm control panel BUS 12 V (9 - 15 V)
Backup battery 3x 1.2V NiMh Eneloop AA HR-3UTGA 1900mAh
Standby consumption 10mA / 60 mA (with / without battery charge)
Output voltage for door impulse (1s) 600 mA, permanent (max. 10s) 300 mA
Operating temperature 0 ° C to + 40 ° C
Dimensions 90 x 90 x 35 mm
Installation environment Indoors
Model: JA-190PL

JA-190PL is a multi installation box, which is used for various components in Jablotron's JA-100 series.

Technical specifications

Dimensions 90 x 90 mm
Closeness IP 40
Withstands up to 250 V
Material ABS
Model: PLV-JA111R

The PLV-JA-111R case is used for external mounting of a JA-111R board. The JA-111R board is usually mounted in the JA-100 control panels, but if you want to have the circuit outside the control panel, ie externally, you will need a cabinet.

To do this, remove the JA-111R from its holder in the control panel, click the JA-111R printed into the cover, and then mount the PLV-JA-111R cabinet externally from the control panel.

Also note that the cabinet comes with a terminal for the JA-111R.

Model: Jablotron klistermærker U

Alarm sign, 80x50mm, for external installation.

 

100 meter copper cable from QCR, which is made in England. Each conductor contains 7 wires of annealed tinned copper wire, which is protected by type 1 PVC. This type of cable is optimal for installations where you want good signal quality. In addition, the cable is user-friendly and is both flexible and easy to strip if desired. It is available in either white or brown.

 

Technical specifications

Threads 7 x 0.182
Material in conductors Soft tinned copper
Resistance value 94.6 Ohm / Km
Leather 0.182mm2
Voltage value 1 Amp
Max. volt 50V
Shielding of conductors PVC TI.1
Cable material PVC Type 6
Working temperature 70 degrees C

639,00  Incl. VAT
( 511,20  Excl. VAT )
Model: Onlinetekniker

We program and test your system in collaboration with you, so you can print from the house in print.

 

600,00  Incl. VAT
( 480,00  Excl. VAT )
Model: MIDI-10
  • Junction box with 10 clamps
  • Nice design
  • Possibility of external marking
By: IPC
129,00  Incl. VAT
( 103,20  Excl. VAT )
Model: DS-PT1-WE(B)

Wireless tag reader for Hikvision's AX PRO Alarm System

  • Wireless card reader for the AX PRO alarm
  • Sound indication of card reading
  • Can control one or more areas
  • Loaded via APP
  • Up to 2 years of battery life
779,00  Incl. VAT
( 623,20  Excl. VAT )
To Top