facebook
  1. Home
  2. Alarm without subscription
  3. Jablotron

Jablotron JA-100

Jablotron Lithium BAT-3V6-R20.01 3.6V 13 Ah for JA-80 IR / JA-150IR / JA151IR
Model: BAT-3V6-R20.01

Special battery belonging to Jablotron's outdoor IR detectors. Used in JA-150IR (4 pcs), JA-151IR (8 pcs), JA-180IR (4 pcs) and JA-80IR (4 pcs).

Technical specifications

excitement 3.6 V / 13Ah
Dimensions Ø x H 61.6 x 33.4 mm
Weight 92.0 g
By: Jablotron
Jablotron BAT-1V2-NIMH.1 Rechargeable battery for JA-120N
Model: BAT-1V2-NIMH.1

BAT-1V2-NIMH.1 is a rechargeable battery for JA-120N.

Technical specifications:
Battery type 1.2V NiMh AA BK-3MCCE 1900mAh Rechargable battery

By: Jablotron
Jablotron JA-151MB Wireless MINI magnet connector Brown
Model: JA-151MB

JA-151MB is a small, brown, wireless magnetic switch, made for small windows.

It is activated when you remove the magnet from the transmitter - which can either activate entry time or trigger alarm.

A tamper switch is built into the detector. Therefore, attempts to remove or open it will cause a tamper alert.

Technical specifications

excitement Lithium battery CR2032 (3 V, 220 mAh)
Battery life Approx. 2 years for 20 daily activations
Frequency 868 MHz
Range Approx. 200 m - open terrain
Magnetens GAB 45/25 mm
Dimensions house 55 x 26 x 16 mm
Dimensions magnet housing 55 x 15 x 16 mm
Dimensions magnet 10 x 4 mm
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
By: Jablotron
Jablotron JA-107PWR power supply for JA-107K
Model: JA-107PWR

JA-107PWR is a spare part for Jablotron's JA-107 control panel. The power supply can replace unit in JA-107 if it should be defective.

By: Jablotron
Jablotron PLV-JA-110E Empty Plastic Housing for JA-110E / JA-150E
Model: PLV-JA-110E

Empty plastic housing that can be used for JA-150 control panel.

By: Jablotron
Jablotron Alkaline C Battery (U-LR14) for JA-80A / 180A
Model: U-LR14

An alkaline LR14 C 1.5V battery.

By: Jablotron
Jablotron USB card reader SE 1220 MNP readID
Model: SE 1220 MNP

This USB card reader makes registering RFID cards, in access control software, easy.

All you have to do is connect the card reader to a PC via USB (2.0) after which the required driver is automatically loaded (Windows, MAC OS & Linux).

If an access card or chip is registered on the card reader, the data information will be transferred to the PC as keyboard data.
The card reader can be used for both Mifare and EM, as it contains both 13.56 Mhz and 125kHz readers.
It allows integration with existing software where data is usually loaded into the system.

The card reader supports these encryptions: Crypto1 for MIFARE Classic and 128 Bit AES DESfire EV1 / 2/3.

The card reader also has pre-programmed settings for the following systems:

Jablotron JA-100 - 125kHz EM (Not Jablotron's own chips)

Roger - 125Khz EM

Roger Mifare - RTO

Roger Racs5 - 125kHz EM

Roger Racs5 - Mifare

Satellite Integra

UniLock

Technical specifications
Dimension 89 x 57 x 12 mm (lx W x H)
Color Black
Connection USB A connector fixed cable - USB 2.0 interface
Cable Fixed cable / 1.8 m / Black - Option for 0.5 m Cable
By: Jablotron
PS PSU 6 (13805 NB) Power supply 12V / 5.0 A
Model: PS PSU 6
  • Universal Switch Mode power supply
  • Mains voltage indicator
  • Error indicator
  • Sabotage protection
By: IPC
Jablotron Cable, 12 conductor Soft cable 100 m pr. roll
Model: Jablotron 12 leder

100 meter copper cable from QCR, which is made in England. Each conductor contains 7 wires of annealed tinned copper wire, which is protected by type 1 PVC. This type of cable is optimal for installations where you want good signal quality. In addition, the cable is user-friendly and is both flexible and easy to strip if desired.

 

Technical specifications

Threads 7 x 0.182
Material in conductors Soft tinned copper
Resistance value 94.6 Ohm / Km
Leather 0.182mm2
Voltage value 1 Amp
Max. volt 50V
Shielding of conductors PVC TI.1
Cable material PVC Type 6
Working temperature 70 degrees C

By: Jablotron
Jablotron Cable, 4 conductor Soft cable 100 m pr. roll
Model: 4 leder kabel

100 meter copper cable from QCR, which is made in England. Each conductor contains 7 wires of annealed tinned copper wire, which is protected by type 1 PVC. This type of cable is optimal for installations where you want good signal quality. In addition, the cable is user-friendly and is both flexible and easy to strip if desired. It is available in either white or brown.

 

Technical specifications

Threads 7 x 0.182
Material in conductors Soft tinned copper
Resistance value 94.6 Ohm / Km
Leather 0.182mm2
Voltage value 1 Amp
Max. volt 50V
Shielding of conductors PVC TI.1
Cable material PVC Type 6
Working temperature 70 degrees C

By: Jablotron
499,00  Incl. VAT
( 399,20  Excl. VAT )
To Top