Jablotron JA-100

JA-120PC (90) is a BUS PHOTOPIR detector from Jablotron, with a coverage of 90 ° / 12m. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

Note that the detector is only compatible with F-Link 1.5.1 or later.

Technical specifications

The JA-160PC (90) is used to detect human movement in a room and have it confirmed with an image.
In case of alarm, the camera takes pictures in color, with a coverage of 90 ° / 12m. The image is taken in color and taken twice first in low (320x240 pixels), and then in high resolution (640 × 480 pixels). The camera can also take pictures in the dark, as it is equipped with flash. Once the pictures are taken, they are saved on the camera's internal micro SD card, and afterwards the image, low resolution, is sent on to the control panel.

The pictures can be seen in the event log, by using F-link or J-link. However, they are displayed in low resolution. If you want to see the image in higher resolution, it can be found under "details." It is also possible to send the images on from the exchange, to an external server, user or KC. It is also possible to send a picture from the MyJablotron website.

In addition, the detector can also take a picture when activating a PG output, due to fire, water damage or the like.

The detector can also be set up to take a pre-alarm picture, whereby a picture is sent at input time or if only one alarm has gone off.

It is possible to set the camera's immunity to false alarms on two levels. Either you can choose fast reaction time and basic immunity, otherwise you can choose a slower reaction time but with a higher degree of immunity.

Technical specifications

JA-180W is a wireless combined PIR and microwave detector, which is intended for places that may be problematic for a normal PIR detector. It can, for example, be a place with frequent temperature changes, air heating or the like. When the PIR detector is activated, MW is also activated, which scans the area to confirm movement in the area. If it turns out that there are people in the area, the alarm is confirmed and a signal goes on to the JA-100 control panel. If you want, you can easily optimize the detector with alternative lenses, as it is compatible with Jablotron's JS-7904 corridor lens, JS-7906 pet lens and JS-7901 curtain lens.

The detector is addressable and takes up a space in the control panel.

Technical specifications

The JA-150M is a wireless magnetic switch / universal detector used for doors and windows and has two zones.

When the magnet is removed from the transmitter, the detector is activated, which either starts an alarm or activates the entry time. The magnet can be placed on either the right or left side. There is a tamper switch built into the detector that gives an alarm if someone tries to remove or open the device. The detector also works in interaction with other external devices (NO / NC), it can e.g. be a water damage detector or a key box.

Note that the detector occupies two slots in the system by default, unless zone 2 is not to be used, whereby it can be deleted in F-Link.

JA-110A is an indoor BUS siren that provides sound during alarm, entry and exit time and PG activation. The siren has a button that can be programmed via F-Link. It is supplied and communicates through the central bus.

The unit is addressable and takes up space in the control panel.

Technical specifications

JA-156J is a wireless and multifunctional panic button / assault press, from Jablotron. It is made to be able to activate a panic alarm if you are in a situation where it is needed.

You configure the device activation modes through F-Link after registering the device with the system. Activation of alarm can be done with hand, foot or knee. In addition, it can detect valuable documents and cash, and is able to confirm the presence of a person (variable hours).

The device is compatible with the JA-103K and JA-107K control panels.

The JA-120N is a "high-power" output module that supplies the output with extra voltage without affecting the BUS of the system. The module can thus be used to pull an end plate or an electric lock. The unit contains batteries that ensure that the voltage pulse of the output is sufficient to pull the lock. The module can be used in places where it is not possible to externally supply the electric lock with power.

The unit is activated with terms connected to the IN input or with PG output signal from the control panel.

Note that the module is addressable and takes up space in the system.

JA-110P 110 ° / 12 m is a BUS detector that is activated by human body heat. Jablotron lenses: JS-7904, JS-7906 and JS-7901, are compatible with the device and can be used if you want to optimize the detection.

It is possible to choose between two levels of immunity to false alarms. In addition, the device has SMARTMEMORY, an optional feature that provides LED indication of activated detector.

Technical specifications