Jablotron JA-100

JI-111C IP Indoor / Outdoor Camera 2MP - DOME

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

• When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
• Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
• It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

• You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
• In addition, you get a complete history available; and can check this at any time to find out what happened in the building at a particular time.

Live video

• Can be started from the MYJABLOTRON mobile app or over the internet.
• You can always check what's going on at the camera's location.
• It takes about 10 seconds to connect to the camera, with a normal internet connection.

 

JA-157P is a wireless outdoor detector with curtain lens, from Jablotron. The device is capable of detecting human movement outside the building. It does this via a dual-zone outdoor detector, with a 5 ° detection angle, made by OPTEX. The unit is suitable for narrow places, such as balconies, shafts or doorways.

The detector due to its dual-PIR system, a high degree of immunity to false alarms. In addition, it has three tamper switches and is equipped with anti-mask function.

The unit also has a built-in transmitter for the JABLOTRON 100 system.

Note that this detector is a replacement for the JA-187P.

Technical specifications

excitement	1x type CR123A (3 V / 1500 mAh) lithium battery
Battery life	up to 3 years (with 120 sec. power saving function)
Frequency	868.1 MHz, JA-100 protocol
Range	up to 300 m - open terrain
Mounting height	0.8 - 1.2 m
Coverage area	2 or 5 m / 5 °
The speed of movement of the object	0.3 - 1.5 m / sec
Max. humidity	95%
Operating temperature	-20 ° C to + 60 ° C
Dimensions	34 x 154 x 43 mm
Installation environment	Outdoor

JA-158P is designed to detect human movement in a monitored outdoor area. It does so with its dual-zone PIR sensor made by OPTEX. However, the transmitter is by Jablotron. The PIR sensors have non-overlapping 94-zone detection, thus avoiding disturbing detections of small animals. The device's power is supplied by lithium batteries, and the detector can even find out to report low battery status to the control panel.

The device has both anti-mask function and a tamper switch on both the front and back, which can notify you if the device is removed from the wall or if the front is removed.

The detector periodically performs self-tests and forwards the results to the control panel.

Technical specifications

excitement	3 pieces. Lithium type LS (T) 14500 (AA 3.6V 2000 mAh) or 3 CR123A
Battery life	Up to 3 years with two batteries and up to 4 years with 3 (120 sec. Sleep mode)
Frequency	868 MHz
Range	Up to 300 m - open terrain
RF strength	<10 mV
Mounting height	2.5 - 3.0 m
Coverage area	12 m / 85 ° (94 segments)
Battery saving function	Either 5 or 120 sec.
LED indicator	Only in test mode
Humidity	95%
Operating temperature	-20 ° C to + 60 ° C
Closeness	IP55
Installation environment	Outdoor

The JA-151IR is an active infrared optical barrier detector with four "shots." It is designed to detect movement through the "shot," in the monitored area.

OPTEX has developed the barrier detector, but it is equipped with a transmitter belonging to the JABLOTRON 100. Due to the optical part of the device's four-shot, it has a high immunity to false alarms. The detector records two zones in the system, both of which periodically self-test and send status to the control panel.

 

The detector uses 4 x BAT-3V6-R20 (3 years life), el. 8 x BAT-3V6-R20 (up to 6 years of life). The batteries are sold separately.

Technical specifications

excitement	4x (8x) type LSH20 lithium batteries (3.6 V / 13 Ah)
Battery life	Up to 3 years * (6 years) * * with 120 sec power saving function
Frequency	868.1 MHz, JA-100 protocol
Range	Up to 300 m - open terrain
Mounting height	0.7 - 1.0 m
Distance between units	max. 100 m
Max. humidity	95%
IP class	IP65
Operating temperature	-20 ° C to + 60 ° C
Dimensions (HxWxD)	452x83x138 mm
Installation environment	Outdoor

JA-1X1A-C-ST is a brushed steel lid with red strobe. The lid fits Jablotron's JA-111A, JA-151A and JA-163A.

 

Technical specifications

Color	Silver / stainless
The color of the signal mask	Red
Weight	1.01 kg
Dimensions	200 x 300 x 61 mm

JA-152A is a wireless siren from the JABLOTRON 100+ system, designed to indicate alarms inside. However, the siren can be used for other acoustic indications, such as activation of PG outputs, input / output time or as a doorbell (which can be set to four different tones)

The siren is equipped with a button that can be pressed if you want to silence it, or activate an emergency alarm. In the event of a power failure, the siren has a backup battery, and then it also has a tamper sensor that tells if it is removed from the outlet.

Technical specifications

excitement	230 V / 50 Hz, fuse class II
Battery / life	3.2 V, 400 mAh (BAT-3V2-CR2) / 3 years
Frequency	868.1 MHz
Communication range	ca. 300 m - open terrain
Sound (melodies)	8 optional sounds for sound indication for PG outputs
Alarm sound level	105 dB / 1 m
Dimensions	90 x 70 x 45 mm
IP class	IP40
Operating temperature	-10 ° C to + 40 ° C

The JA-152J MS II is a two-way hand transmitter in the JABLOTRON 100 series. The hand transmitter can both switch on / off an area, send an assault alarm, activate PG output and more.

The hand transmitter acts as two control panels with LED and acoustic indication of the controlled functions. With the transmitter it is possible to look at the LED when an area is connected, or open zones when connecting if the control panel is set up for it. The transmitter can notify at low battery, and is also compatible with the AC-16x multifunction relay in which it can be loaded to control its functions.

To expand the PG output pulse, you can hold down the button, whereby activation is sent every second. This can be useful when partially closing shutters, for example. It is also possible to mute button by pressing or locking the button so that you do not accidentally activate the assault alarm. By double-clicking, you can find the extended settings.

Note that the device is addressable and takes up space in the control panel, and that it is compatible with the FW LJ (MD) 60416+ control panel.

excitement	Lithium battery type CR 2032 (3.0 V / 0.2 A)
Power supply unit	C type (EN 50131-6)
Typical battery life	ca. 2 years (10 activations per day)
Communication frequency	868.1 MHz
Communication area	about 300 m (in open terrain)
Dimensions	63 × 36 × 15 mm
Operating temperature	-10 ° C to + 40 ° C
Compatible with	FW LJ (MD) 60416+ control panel; F-Link 1.4.0 or higher

JA-194J-RE is a red PROX piece in leather that fits Jablotron's JA-100 system.

Frequency

Jablotron unique code

JA-155J is a control unit that controls other devices, such as garage door, parking boom or the like. In addition to these functions, by using a 12V output on the third-party system / device (eg a Roger ADK system) it can also send an assault signal to the alarm center. In addition, it is also capable of wirelessly connecting / disconnecting the JA-100 system.

The unit can be loaded into AC-16x multifunction relays and control panels.

Technical specifications

excitement	12V
Spending	only when activating 10/20 mA
Frequency	868.1 MHz
Range	Approx. 50 m - open terrain
Operating temperature	-40 ° C to + 85 ° C
Dimensions	84 x 53 x 25 mm

JA-110F BUS is a water damage detector for bathrooms, basements and the like. When the electrodes are flooded, a signal is sent to the control panel through BUS. It does the same when the water disappears again. The detector takes up one space in the control panel and is also not equipped with a tamper switch.

excitement	via the control panel's BUS 12 V (9 –15 V)
Liquid	Water
Dimensions	53 × 20 × 5 mm
Operating temperature	-10 to + 40 ° C

JA-110TP is a thermostat that, together with a programmable output module, can provide full control over the temperature in the home or business. It allows you to monitor and remotely control temperature from the MyJablotron mobile app or website and provides access to a lot of other smart features. You can, for example, see graphs of the temperature history, get notifications in case of overheating or freezing, reduce the heat if a window is opened, maintain the minimum temperature by deactivation, weekly schedule and night setback. It is also possible to switch to manual temperature control if desired. In addition, it can also control a PG output in the system.

Note that the device takes up one space in the system.

A system can have up to 16 thermostats.

Technical specifications

excitement	via the control panel BUS +12 V (+9 ... +15 V)
Standby power consumption	1 mA
Max. power consumption for cable selection	1 mA
Recommended mounting height	1.5 m above the floor
Dimensions	66 x 90 x 22 mm
Operating temperature	-10 to + 70 ° C
Measuring precision within the temperature range	0.1 ° C
Installation environment	Indoors

JA-111 TH is a BUS-based temperature gauge that can detect temperatures between -20 ° C and + 60 ° C. Via the control panel, the meter sends its data to the Web Self Service (WSS) on Cloud Jablotron, where the data is stored. From here you can see graphs of measured temperatures, or choose to receive notifications (SMS, push notification, or email) about eg temperature fluctuations. There is also both a web page and mobile app from which you can access status.

With a meter like this, it is obvious to monitor eg refrigerated display cases or server rooms, or frost-proof a holiday home.

 

Note that the device takes up one space in the system

Voltage via the control panel'S BUS	12 V (9 ... 15 V)
Standby power consumption	5 mA
Max. power consumption for cable selection	5 mA
Dimensions	55 x 27 x 16 mm
Measurement temperatures	-20 ° C to + 70 ° C
Operating temperature	-20 ° C to + 70 ° C
Measuring precision within the temperature range	± 0.1 ° C

If you need temperature measurement in outdoor or climatically demanding environments (IP53), JB-EXT-TH-B makes this possible. It does this using an internal or external sensor. The internal sensor, which is part of the product, measures the temperature in a range from -40 to 60 ° C. If you need something that can measure temperatures on both gas, liquid or solids, in the range from -50 to 200 ° C, you must, however, have a JB-TS-PT1000, which is an external sensor (not included) .

The measured data is sent to MyJablotron, where it is analyzed and saved for later use. This could be for activating a selected PG output, SMS reporting when temperature limits are exceeded or for creating diagrams of the measured temperatures. All these features are programmable in the MyJablotron app.

Note that PG control is only assigned to a maximum of two thermometers per central.

Cloud Jablotron can notify if temperature limits are exceeded, display graphs of previously measured temperatures, and can be programmed to notify different people when different criteria are met - e.g. by temperature drop or rise.

JB-EXT-TH-B is i.a. optimal for monitoring temperatures in server rooms and refrigerated display cases, or for frost-proofing a holiday home.

The JA-159J is a wireless device for the JABLOTRON 100+. The button can be used to control electrical equipment, to activate an emergency alarm, or as a wireless doorbell.

Note that the device takes up space in the system

A label for the doorbell button can be printed by the printers normally used for printing area labels for JABLOTRON 100 control panels.

Technical specifications

excitement	2x CR 2032 (3 V / 0.2 Ah)
Typical battery life	ca. 5 years (outside, 3 activations a day)
Communication	868.1 MHz
Communication range	ca. 300 m - open terrain
Dimensions	70 x 30 x 20 mm (77 x 47 x 28 mm, including the cover)
IP ranking	IP65
Operating temperature	-10 ° C to + 40 ° C
Relative humidity	25 to 95%