facebook
  1. Home
  2. Alarm without subscription
  3. Jablotron

Jablotron JA-100

Jablotron JA-151N Wireless PG output relay 12/24 VDC
Model: JA-151N

The JA-151N is a 12 / 24VDC wireless relay that copies the status of a selected PG output in the JA-100 system (PG1 to PG 32).
The PG module is addressed on the board via the 5 DIP switches.

Note that this module does not take up any space in the control panel.

Technical specifications

excitement 12 - 16 VDC
Output relay Max. 1 A / 30 V DC
Exits / terminals 1 PG output 3 x terminals C, NC, NO
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
By: Jablotron
Jablotron JA-192PL-A Universal installation box
Model: JA-192PL-A

JA-192PL-A is a universal can that can be used, for example, for Jablotron's JA-111 modules and their JA-151TH temperature detector.

Technical specifications
Color Light gray
Cable entry Use the deflection form and screw connection corresponding to the enclosure class
Dimensions 6.5 x 7 x 3.5 cm (H x W x D)
IP class IP65
Installation environment Outdoor
By: Jablotron
Jablotron JA-110T BUS short circuit / insulation module
Model: JA-110T

JA-110T BUS is an insulator that can separate and protect a BUS connection in an unprotected area, against short circuit. The unit can be mounted in a JA-190PL box and is supplied through the control panel's BUS.

Be aware that it must not be addressed and therefore does not take up space in the exchange.

Technical specifications

excitement via the control panel's BUS 12 V (9 –15 V)
Standby consumption 5 mA
Maximum load 250 mA
Switch OFF 300 mA
Operating temperature -10 ° C to 40 ° C
By: Jablotron
Jablotron JA-110Z-B BUS terminal module
Model: JA-110Z-B

JA-110Z-B can divide the system BUS into several branches. The print is square, has sloping terminal blocks and a large hole. The module can be mounted in a JA-190PL.

Technical specifications
Maximum voltage AC 42 V
Maximum voltage DC 60 V
Maximum current 2 A
By: Jablotron
Jablotron JA-110Z-D BUS terminal module
Model: JA-110Z-D

The JA-110Z-D module can divide the BUS into several branches by removing the jumpers. The print is rectangular, has sloping elevator terminals, and center hole for cable insertion. The module is the same size as the JA-116H 8 x 4 terminals with elevator terminals. The module can be mounted in JA-194PL JA-106K PLV-CP-M / L and has a capacity for connection of up to 32 x CC-01.

Technical specifications
Maximum voltage 42 V DC
Maximum voltage 60 V AC
Maximum current 2 A
By: Jablotron
Jablotron JA-111I Universal RGB LED indicator
Model: JA-111I

JA-111I indicates that either on and off or PG output is activated (1-32). The indication takes place with multicolored LED in green, yellow, red, or blue.

Technical specifications

excitement 12 V (9 - 15 V)
LED ON consumption 4 mA
LED OFF consumption 0 mA
Operating temperature -10 to 40 ° C
By: Jablotron
Jablotron JA-195PL multi installation box
Model: JA-195PL
By: Jablotron
Jablotron CC-01 Installation cable for JA-100 system, POWER
Model: CC-01

CC-01 is a JA-100 installation cable, intended for the BUS installation, which can be walled directly into the wall.

The inner conductors of the cable match the terminal colors.

The cable is 300 m, each meter is marked for clarity. Comes in smart box that makes unrolling easy.

Technical specifications
1 x 2 x 24 AWG (0.5 mm) max. conducts DC resistance at 20 ° C 97 Ohm / km
1 x 2 x 20 AWG (0.8 mm) max. conducts DC resistance at 20 ° C 38 Ohm / km
By: Jablotron
Jablotron CC-02 Installation cable for JA-100 system, STANDARD
Model: CC-02

CC-02 is an installation cable, intended for BUS installation.

The wires match the colors of the different terminals of the devices.

The cable is 300 m, each meter is marked for clarity. Comes in smart box that makes unrolling easy.

2 x 2 x 24 AWG (0.5 mm) max. conducts DC resistance at 20 ° C 97 Ohm / km

By: Jablotron
Jablotron CC-03 Installation cable for JA-100 system, POWER
Model: CC-03

CC-03 is an installation cable for BUS installation. The wires match the colors of the different terminals of the devices. The cable is 250 m, each meter is marked for clarity. Comes in smart box that makes unrolling easy.

3 x 2 x 24 AWG (0.3 mm)
1 x 2 x 20 AWG (0.7 mm)

By: Jablotron
Jablotron CC-11 Installation cable for JA-100 system, BRAND
Model: CC-11

CC-11 is a fire-retardant installation cable, according to class B2CA. The cable is made for installations in places where many people move, such as hotels, schools and shops. The cable is more resistant to emissions of toxic gases or the spread of fire along cable bundles. The cable has a length of 200 m, each meter is marked and delivered in a cardboard box. The cable is made for JABLOTRON 100 alarm systems and the color of the conductors also matches the terminals in the terminal block from the JABLOTRON 100 series.

- 1 x 2 x 20 AWG (0.5 mm2)
- 1 x 2 x 24 AWG (0.5 mm2)
- EN 60332-1-2

By: Jablotron
Jablotron JA-191PL Angle bracket for JA-1x1 detectors
Model: JA-191PL

If you need to hang a detector from Jablotron's JA-1x1P series, either in the ceiling or with a special slope, then the JA-191PL bracket is the solution.

The bracket is made for Jablotron's new series of PIR detectors, JA-1x1P. The bracket is also equipped with a tamper switch, which can be connected to the PIR detector.

 
By: Jablotron
Jablotron JA-196PL-S Wall mounting box SMALL for PIR
Model: JA-196PL-S

JA-196PL-S is a small wall mount box for PIR detectors.

If you want to mount a PIR detector sub-galvanized in a brick or plaster wall, you need a can like this. With the help of the associated frame, you can simply make the installation go together with the wall. The can fits Jablotron's new design series, which they introduced in 2019.

By: Jablotron
Jablotron JA-193PL-BOX-M Wall mounting box MEDIUM for JA-151
Model: JA-193PL-BOX-M

JA-193PL-BOX-M is a medium wall mount box for JA-15.

The can enables you to mount a PIR detector, from the JA-1x1P series, sub-galvanized in brick and plaster walls. You can, with the accompanying frame, make the installation go hand in hand with the wall.

This box is size MEDIUM, but it is also available smaller (to match the different sizes of the PIR detectors) and the frames are available in white or gray.

Technical specifications
Lowering to size M (JA-151P-xx) 70x136mm
By: Jablotron
Jablotron JA-193PL-BOX-S Wall mounting box LILLE for JA-111
Model: JA-193PL-BOX-S

JA-193PL-BOX-S is a small wall mount box for JA-111.

The box is designed to mount PIR detectors from the JA-1x1P series, sub-galvanized in brick walls and plaster walls. Using the corresponding frame, you can make the installation go together with the wall.

This can is small, but it is also available in medium (to match the sizes of the detectors). The frames can be found in similar sizes and in the colors white and gray.

Technical specifications

Sub-recess for size S (JA-111P-xx) 70x96mm
By: Jablotron
Jablotron JA-193PL-FMW WHITE frame MEDIUM for built-in box
Model: JA-193PL-F-M-W

JA-193PL-FMW is a white frame for built-in box, intended for immersion of PIR detector. This frame matches the medium can.

 
By: Jablotron
Jablotron JA-193PL-FMG GRAY frame MEDIUM for built-in box
Model: JA-193PL-F-M-G

JA-193PL-FMG is a gray frame for built-in box, intended for immersion of PIR detector. The frame matches a can in size medium.

 
By: Jablotron
Jablotron JA-193PL-FSW WHITE frame SMALL for built-in box
Model: JA-193PL-F-S-W

JA-193PL-FSW is a small, white frame for built-in box, intended for PIR detector immersion. This frame matches the small can.

By: Jablotron
To Top