Jablotron

The JA-150M is a wireless magnetic switch / universal detector used for doors and windows and has two zones.

When the magnet is removed from the transmitter, the detector is activated, which either starts an alarm or activates the entry time. The magnet can be placed on either the right or left side. There is a tamper switch built into the detector that gives an alarm if someone tries to remove or open the device. The detector also works in interaction with other external devices (NO / NC), it can e.g. be a water damage detector or a key box.

Note that the detector occupies two slots in the system by default, unless zone 2 is not to be used, whereby it can be deleted in F-Link.

JA-110A is an indoor BUS siren that provides sound during alarm, entry and exit time and PG activation. The siren has a button that can be programmed via F-Link. It is supplied and communicates through the central bus.

The unit is addressable and takes up space in the control panel.

Technical specifications

JA-156J is a wireless and multifunctional panic button / assault press, from Jablotron. It is made to be able to activate a panic alarm if you are in a situation where it is needed.

You configure the device activation modes through F-Link after registering the device with the system. Activation of alarm can be done with hand, foot or knee. In addition, it can detect valuable documents and cash, and is able to confirm the presence of a person (variable hours).

The device is compatible with the JA-103K and JA-107K control panels.

The JA-120N is a "high-power" output module that supplies the output with extra voltage without affecting the BUS of the system. The module can thus be used to pull an end plate or an electric lock. The unit contains batteries that ensure that the voltage pulse of the output is sufficient to pull the lock. The module can be used in places where it is not possible to externally supply the electric lock with power.

The unit is activated with terms connected to the IN input or with PG output signal from the control panel.

Note that the module is addressable and takes up space in the system.

JA-110P 110 ° / 12 m is a BUS detector that is activated by human body heat. Jablotron lenses: JS-7904, JS-7906 and JS-7901, are compatible with the device and can be used if you want to optimize the detection.

It is possible to choose between two levels of immunity to false alarms. In addition, the device has SMARTMEMORY, an optional feature that provides LED indication of activated detector.

Technical specifications

JA-111A base for BUS outdoor siren that emits sound in case of alarm, chirp sound and PG activation, or deactivation. The lid is available in white plastic, gray plastic or brushed steel. All with red strobe.

The siren communicates and is supplied through the control panel's BUS and has both a built-in battery and a spirit level. In the event of a power failure, the siren enters power save mode.

The unit is addressable and takes up space in the control panel.

Technical specifications

JA-1X1A-C-WH is a white plastic lid, with red strobe that fits Jablotron's JA-111A, JA-151A and JA-163A.

Technical specifications

JA-111ST-A detects fire hazard indoors. It can be used both for residential and commercial purposes. In addition, it is possible to install it in caravans, motorhomes and caravans. However, it is not applicable in industrial environments. The detector is made to also be able to activate other JA-151ST-A or JA-111ST-A detectors in the installation, and then it also acts as a siren for the alarm. It can also operate independently, in case of lost connection, as long as it is equipped with backup batteries. The unit can be set to detect smoke AND heat, smoke OR heat, ONLY smoke or ONLY heat. This is possible because it consists of two individual detectors. A heat detector and an optical smoke detector - which detect a change in light reflection in its built-in smoke chamber. It also has a built-in light sensor that can be used for test signal. The unit sends both a signal to the alarm center and warns locally.

Note that the detector takes up one space in the system.

JA-150E is a wireless graphic control panel, with built-in PROX reader, for the JA-100K control panel.

The control panel has an LCD screen, RFID reader and function keys and can be found in both wireless or bus-mounted version (JA-110E).

The unit consists of four function keys that are used to operate areas, PG outputs etc. At the same time, the function keys also function as status indicators. The unit has a nice white backlight and connection for external power supply. You can also see the status of areas, temperature and information about the operating menu on the panel display.

The panel works with all JA-100 control panels.

Technical specifications