Jablotron JA-111ST-A BUS smoke and heat detector with sound and siren

Model: JA-111ST-A BUS
Availability: In stock
Log in here to buy

JA-111ST-A detects fire hazard indoors. It can be used both for residential and commercial purposes. In addition, it is possible to install it in caravans, motorhomes and caravans. However, it is not applicable in industrial environments. The detector is made to also be able to activate other JA-151ST-A or JA-111ST-A detectors in the installation, and then it also acts as a siren for the alarm. It can also operate independently, in case of lost connection, as long as it is equipped with backup batteries. The unit can be set to detect smoke AND heat, smoke OR heat, ONLY smoke or ONLY heat. This is possible because it consists of two individual detectors. A heat detector and an optical smoke detector - which detect a change in light reflection in its built-in smoke chamber. It also has a built-in light sensor that can be used for test signal. The unit sends both a signal to the alarm center and warns locally.

Note that the detector takes up one space in the system.

Technical specifications
Supply voltage 9 - 15 V DC / 3.5 mA (150 mA during an alarm)
Back-up supply 3x alkaline batteries AA 1.5 V or 3 x lithium batteries (AA) 1.5 V
Smoke detection Optical light scattering
Smoke detector sensitivity m = 0.11 ÷ 0.13 dB / m
Temperature detection Class A1
Alarm temperature 60 ° C to 65 ° C
Operating temperature -10 ° C to 70 ° C
Dimensions diameter 126 mm, height 52 mm, 150g
Installation environment Indoors

There is no reviews yet. Be the first to write us your opinion

Add review: