Jablotron

JA-152A is a wireless siren from the JABLOTRON 100+ system, designed to indicate alarms inside. However, the siren can be used for other acoustic indications, such as activation of PG outputs, input / output time or as a doorbell (which can be set to four different tones)

The siren is equipped with a button that can be pressed if you want to silence it, or activate an emergency alarm. In the event of a power failure, the siren has a backup battery, and then it also has a tamper sensor that tells if it is removed from the outlet.

Technical specifications

The JA-152J MS II is a two-way hand transmitter in the JABLOTRON 100 series. The hand transmitter can both switch on / off an area, send an assault alarm, activate PG output and more.

The hand transmitter acts as two control panels with LED and acoustic indication of the controlled functions. With the transmitter it is possible to look at the LED when an area is connected, or open zones when connecting if the control panel is set up for it. The transmitter can notify at low battery, and is also compatible with the AC-16x multifunction relay in which it can be loaded to control its functions.

To expand the PG output pulse, you can hold down the button, whereby activation is sent every second. This can be useful when partially closing shutters, for example. It is also possible to mute button by pressing or locking the button so that you do not accidentally activate the assault alarm. By double-clicking, you can find the extended settings.

Note that the device is addressable and takes up space in the control panel, and that it is compatible with the FW LJ (MD) 60416+ control panel.

JA-194J-RE is a red PROX piece in leather that fits Jablotron's JA-100 system.

JA-155J is a control unit that controls other devices, such as garage door, parking boom or the like. In addition to these functions, by using a 12V output on the third-party system / device (eg a Roger ADK system) it can also send an assault signal to the alarm center. In addition, it is also capable of wirelessly connecting / disconnecting the JA-100 system.

The unit can be loaded into AC-16x multifunction relays and control panels.

Technical specifications

JA-110F BUS is a water damage detector for bathrooms, basements and the like. When the electrodes are flooded, a signal is sent to the control panel through BUS. It does the same when the water disappears again. The detector takes up one space in the control panel and is also not equipped with a tamper switch.

JA-110TP is a thermostat that, together with a programmable output module, can provide full control over the temperature in the home or business. It allows you to monitor and remotely control temperature from the MyJablotron mobile app or website and provides access to a lot of other smart features. You can, for example, see graphs of the temperature history, get notifications in case of overheating or freezing, reduce the heat if a window is opened, maintain the minimum temperature by deactivation, weekly schedule and night setback. It is also possible to switch to manual temperature control if desired. In addition, it can also control a PG output in the system.

Note that the device takes up one space in the system.

A system can have up to 16 thermostats.

Technical specifications

JA-111 TH is a BUS-based temperature gauge that can detect temperatures between -20 ° C and + 60 ° C. Via the control panel, the meter sends its data to the Web Self Service (WSS) on Cloud Jablotron, where the data is stored. From here you can see graphs of measured temperatures, or choose to receive notifications (SMS, push notification, or email) about eg temperature fluctuations. There is also both a web page and mobile app from which you can access status.

If you need temperature measurement in outdoor or climatically demanding environments (IP53), JB-EXT-TH-B makes this possible. It does this using an internal or external sensor. The internal sensor, which is part of the product, measures the temperature in a range from -40 to 60 ° C. If you need something that can measure temperatures on both gas, liquid or solids, in the range from -50 to 200 ° C, you must, however, have a JB-TS-PT1000, which is an external sensor (not included) .

The measured data is sent to MyJablotron, where it is analyzed and saved for later use. This could be for activating a selected PG output, SMS reporting when temperature limits are exceeded or for creating diagrams of the measured temperatures. All these features are programmable in the MyJablotron app.

Note that PG control is only assigned to a maximum of two thermometers per central.

Cloud Jablotron can notify if temperature limits are exceeded, display graphs of previously measured temperatures, and can be programmed to notify different people when different criteria are met - e.g. by temperature drop or rise.

JB-EXT-TH-B is i.a. optimal for monitoring temperatures in server rooms and refrigerated display cases, or for frost-proofing a holiday home.

The JA-159J is a wireless device for the JABLOTRON 100+. The button can be used to control electrical equipment, to activate an emergency alarm, or as a wireless doorbell.

Note that the device takes up space in the system

Technical specifications

JA-150TP is a wireless thermostat from Jablotron, which in collaboration with a programmable output module, gives full control over the temperature in the home. Via the MyJablotron app, or website, it is possible to remotely control and monitor the temperature. Here you can also see graphs of the temperature history, get reports of overheating or freezing, turn down the heat if a window is open, possibility to maintain a minimum temperature, set up a weekly calendar mode etc.

There is room for 16 thermostats per system and there is also the option of manual temperature control if desired.

JA-151 TH is a wireless temperature gauge, from Jablotron. From the meter, data is sent, via the control panel, to the Web Self Service (WSS) on Cloud Jablotron. The measured dates are stored in WSS, and from here you can see temperature graphs and set up parameters for notifications about e.g. fluctuations in temperatures. These notifications can be obtained via SMS, push notification from the app or email. In addition, you can see the status on either the mobile app or on the website.

With these functions, the sensor is suitable for keeping track of refrigerated display cases, server rooms, frost protection of holiday homes, etc.

Please note that the wireless version is not recommended for freezers.

Technical specifications

The JA-150G-CO is a wireless module that can be installed in an EI208W carbon monoxide detector and enables wireless connection to the JABLOTRON 100 system. The module can send information to the system, about alarm, deactivation and battery status in the detector. The module takes up one space in the system.

JA-188J is an assault and emergency call transmitter. However, it can also be used to control other devices e.g. opening the door, switching lights on / off or switching on / off an area, etc.

Through the control panel, it is possible to set which function you want the button to have. The default setting is either assault or on / off. The other functions can be found under units in F-link. There is also sabotage cash in the pressure and it also monitors the battery voltage.

Technical specifications

JA-187J is an assault transmitter that can be worn as either a wristwatch or around the neck (strap included in the package).

But in addition, it can also be used to control other devices if desired.

Technical specifications