facebook
  1. Home
  2. Alarm without subscription
  3. Jablotron
  4. Sirens

Sirener til Jablotronalarm

Jablotron has a complete range of sirens, both indoor and outdoor, as well as wireless and wired. Jablotron's siren series is suitable for most scenarios, but external sirens can actually be attached as many as needed. All sirens meet the requirements of Insurance and Pensions for insurance-approved alarm equipment. This means that, among other things, there is a backup battery and sabotage monitoring in all sirens. The sirens can also be used as an acoustic indication, for example beeping when the back door is opened or movement around the house.

Note that fire detectors (both wireless and wired) can act as sirens in the event of both fire and burglary.

Jablotron JA-110A II BUS indoor siren without backup and louder sound
Model: JA-110A II

JA-110A II is an indoor BUS siren that provides sound at alarm, entry and exit time, chirp sound, PG activation etc. The siren has a button that can be programmed in F-Link. The alarm is supplied and communicates via the control panel's BUS. It is possible to insert a backup battery. The siren also has an alarm verification function implemented.

The unit is addressable and takes up space in the control panel.

Technical specifications

Power supply 12 V DC (9… 15 V), from BUS
Backup battery BAT-3V2-CR2 (400 mAh)
Gsn. Standby consumption 5 mA
Type of warning device type Z / 12-hour backup
Siren piezoelectric, 100 dB / m (± 5 dB / m)
Dimensions 80 x 80 x 35 mm
Weight (with battery) 92 g
Operating temperature range -10 ° C to + 40 ° C
Average operating humidity 75% RF without condensation
Operating environment according to EN 50131-1 II. Indoor general
By: Jablotron
Jablotron JA-163A Base for full wireless outdoor siren WITHOUT BATTERY
Model: JA-163A

JA-163A RB is a siren that belongs to the JABLOTRON-100 alarm system. The device is wireless and does not require any external power supply as it is powered by a lithium battery. The siren is used as an indication of an alarm, in an outdoor environment. The unit consists of three different components, which are delivered separately, a JA-163A-BASE-RB with the electronic parts, a BAT-100 lithium battery and then a cover from the JA-1X1A-C-xx series, which is available in different colors and designs.

 

Lids are available in the following three colors: white plastic, gray plastic and brushed steel. All three have red strobes.

The device takes up space in the system.

Technical specifications

excitement Lithium battery 3.6 V / 13 Ah type BAT-100A, BAT-100A.01 (up to 2 batteries can be used)
Current consumption (nominal / maximum) 0.3 / 1000mA
Battery low voltage ≤ 2.8 V
Typical battery life ca. 5 years (for basic settings)
Frequency 868.1 MHz, JABLOTRON protocol
Range ca. 300 m - open terrain
Piezo electric siren 100 dB / m
Dimensions 200 x 300 x 70 mm
Weight 434 g
Operating temperature -20 to + 60 ° C
Operating humidity 75% (95% 30 days) RF, non-condensing
IP class IP44
Installation environment Outdoor
By: Jablotron
Jablotron JA-110A BUS indoor siren
Model: JA-110A

JA-110A is an indoor BUS siren that provides sound during alarm, entry and exit time and PG activation. The siren has a button that can be programmed via F-Link. It is supplied and communicates through the central bus.

The unit is addressable and takes up space in the control panel.

Technical specifications

excitement via the control panel's BUS 12 V (9 - 15 V)
Gsn. Standby consumption 10 mA
Siren piezoelectric, 85 dB / m (± 5 dB / m)
Dimensions 80 x 80 x 35 mm
Operating environment according to EN 50131-1 II. Indoor general
Operating temperature range -10 to + 40 ° C
By: Jablotron
Jablotron JA-111A-BASE-RB base for BUS outdoor siren WITHOUT lid
Model: JA-111A-BASE-RB

JA-111A base for BUS outdoor siren that emits sound in case of alarm, chirp sound and PG activation, or deactivation. The lid is available in white plastic, gray plastic or brushed steel. All with red strobe.

The siren communicates and is supplied through the control panel's BUS and has both a built-in battery and a spirit level. In the event of a power failure, the siren enters power save mode.

The unit is addressable and takes up space in the control panel.

Technical specifications

Voltage via the control panel'S BUS 12 V (9 - 15 V)
Consumption in the event of a power failure 5 mA
Consumption when charging internal battery 50 mA
Back-up battery NiCd pack 4.8 V / 1,800 mAh
Battery life Approx. 3 years
Siren Piezo electric, 110 db @ 1m
Dimensions 200 x 300 x 70 mm
Operating temperature -25 to 60 ° C
IP Class IP 34D
Installation environment Outdoor
By: Jablotron
Jablotron JA-1X1A-C-WH White Plastic lid / red strobe - 111A, 151A, 163A
Model: JA-1X1A-C-WH

JA-1X1A-C-WH is a white plastic lid, with red strobe that fits Jablotron's JA-111A, JA-151A and JA-163A.

Technical specifications

Color White
The color of the signal mask Red
Weight 0.67 kg
Dimensions 200 x 300 x 61 mm
By: Jablotron
Jablotron JA-150A II Wireless indoor siren
Model: JA-150A II

JA-150A II is a wireless indoor siren that sounds an alarm in case of burglary, entry / exit time and can indicate other activations in the control panel. The siren also has a programmable button.

Be aware that the siren takes up one space in the control panel and that batteries are purchased separately.

Technical specifications

Voltage / effect 230V AC / 0.3 W; grade. Protection II
Max. leader size 1.5 mm2
Backup / recharge time mine. 12h / 72h max
Battery approx. life 3.6V, 170mAh / 3 years
Minimum voltage of the battery under load 3.0 V.
Battery / maximum voltage without load 4.5V
Frequency 868.1 MHz, Jablotron protocol
Range ca. 300 m - open terrain
Siren piezo electric, 85 dB @ 1m
Dimensions 80 x 80 x 34 mm
Temperature range -10 to + 40 ° C
By: Jablotron
Jablotron JA-1X1A-C-ST Brushed steel lid / red strobe for 111A, 151A, 163A
Model: JA-1X1A-C-ST

JA-1X1A-C-ST is a brushed steel lid with red strobe. The lid fits Jablotron's JA-111A, JA-151A and JA-163A.

 

Technical specifications

Color Silver / stainless
The color of the signal mask Red
Weight 1.01 kg
Dimensions 200 x 300 x 61 mm
By: Jablotron
Jablotron JA-1X1A-C-GR Gray plastic lid / red strobe for 111A, 151A, 163A
Model: JA-1X1A-C-GR

JA-1X1A-C-GR is a plastic cover for JA-111A, JA-151A and JA-163A. The lid is gray with a red strobe.

Technical specifications

Weight 0.65 kg
Dimensions 200 x 300 x 61 mm
By: Jablotron
Jablotron JA-152A Internal siren for 230 V socket
Model: JA-152A

JA-152A is a wireless siren from the JABLOTRON 100+ system, designed to indicate alarms inside. However, the siren can be used for other acoustic indications, such as activation of PG outputs, input / output time or as a doorbell (which can be set to four different tones)

The siren is equipped with a button that can be pressed if you want to silence it, or activate an emergency alarm. In the event of a power failure, the siren has a backup battery, and then it also has a tamper sensor that tells if it is removed from the outlet.

Technical specifications

excitement 230 V / 50 Hz, fuse class II
Battery / life 3.2 V, 400 mAh (BAT-3V2-CR2) / 3 years
Frequency 868.1 MHz
Communication range ca. 300 m - open terrain
Sound (melodies) 8 optional sounds for sound indication for PG outputs
Alarm sound level 105 dB / 1 m
Dimensions 90 x 70 x 45 mm
IP class IP40
Operating temperature -10 ° C to + 40 ° C
By: Jablotron
To Top