facebook
  1. Home
  2. Alarm without subscription

Alarm system and burglar alarm

Jablotron JA-110Z-B BUS terminal module
Model: JA-110Z-B

JA-110Z-B can divide the system BUS into several branches. The print is square, has sloping terminal blocks and a large hole. The module can be mounted in a JA-190PL.

Technical specifications
Maximum voltage AC 42 V
Maximum voltage DC 60 V
Maximum current 2 A
By: Jablotron
Jablotron JA-110Z-D BUS terminal module
Model: JA-110Z-D

The JA-110Z-D module can divide the BUS into several branches by removing the jumpers. The print is rectangular, has sloping elevator terminals, and center hole for cable insertion. The module is the same size as the JA-116H 8 x 4 terminals with elevator terminals. The module can be mounted in JA-194PL JA-106K PLV-CP-M / L and has a capacity for connection of up to 32 x CC-01.

Technical specifications
Maximum voltage 42 V DC
Maximum voltage 60 V AC
Maximum current 2 A
By: Jablotron
Jablotron JA-111I Universal RGB LED indicator
Model: JA-111I

JA-111I indicates that either on and off or PG output is activated (1-32). The indication takes place with multicolored LED in green, yellow, red, or blue.

Technical specifications

excitement 12 V (9 - 15 V)
LED ON consumption 4 mA
LED OFF consumption 0 mA
Operating temperature -10 to 40 ° C
By: Jablotron
Jablotron JA-195PL multi installation box
Model: JA-195PL
By: Jablotron
Jablotron CC-01 Installation cable for JA-100 system, POWER
Model: CC-01

CC-01 is a JA-100 installation cable, intended for the BUS installation, which can be walled directly into the wall.

The inner conductors of the cable match the terminal colors.

The cable is 300 m, each meter is marked for clarity. Comes in smart box that makes unrolling easy.

Technical specifications
1 x 2 x 24 AWG (0.5 mm) max. conducts DC resistance at 20 ° C 97 Ohm / km
1 x 2 x 20 AWG (0.8 mm) max. conducts DC resistance at 20 ° C 38 Ohm / km
By: Jablotron
Jablotron CC-02 Installation cable for JA-100 system, STANDARD
Model: CC-02

CC-02 is an installation cable, intended for BUS installation.

The wires match the colors of the different terminals of the devices.

The cable is 300 m, each meter is marked for clarity. Comes in smart box that makes unrolling easy.

2 x 2 x 24 AWG (0.5 mm) max. conducts DC resistance at 20 ° C 97 Ohm / km

By: Jablotron
Jablotron CC-03 Installation cable for JA-100 system, POWER
Model: CC-03

CC-03 is an installation cable for BUS installation. The wires match the colors of the different terminals of the devices. The cable is 250 m, each meter is marked for clarity. Comes in smart box that makes unrolling easy.

3 x 2 x 24 AWG (0.3 mm)
1 x 2 x 20 AWG (0.7 mm)

By: Jablotron
Jablotron CC-11 Installation cable for JA-100 system, BRAND
Model: CC-11

CC-11 is a fire-retardant installation cable, according to class B2CA. The cable is made for installations in places where many people move, such as hotels, schools and shops. The cable is more resistant to emissions of toxic gases or the spread of fire along cable bundles. The cable has a length of 200 m, each meter is marked and delivered in a cardboard box. The cable is made for JABLOTRON 100 alarm systems and the color of the conductors also matches the terminals in the terminal block from the JABLOTRON 100 series.

- 1 x 2 x 20 AWG (0.5 mm2)
- 1 x 2 x 24 AWG (0.5 mm2)
- EN 60332-1-2

By: Jablotron
Jablotron JA-191PL Angle bracket for JA-1x1 detectors
Model: JA-191PL

If you need to hang a detector from Jablotron's JA-1x1P series, either in the ceiling or with a special slope, then the JA-191PL bracket is the solution.

The bracket is made for Jablotron's new series of PIR detectors, JA-1x1P. The bracket is also equipped with a tamper switch, which can be connected to the PIR detector.

 
By: Jablotron
Jablotron JA-196PL-S Wall mounting box SMALL for PIR
Model: JA-196PL-S

JA-196PL-S is a small wall mount box for PIR detectors.

If you want to mount a PIR detector sub-galvanized in a brick or plaster wall, you need a can like this. With the help of the associated frame, you can simply make the installation go together with the wall. The can fits Jablotron's new design series, which they introduced in 2019.

By: Jablotron
Jablotron JA-193PL-BOX-M Wall mounting box MEDIUM for JA-151
Model: JA-193PL-BOX-M

JA-193PL-BOX-M is a medium wall mount box for JA-15.

The can enables you to mount a PIR detector, from the JA-1x1P series, sub-galvanized in brick and plaster walls. You can, with the accompanying frame, make the installation go hand in hand with the wall.

This box is size MEDIUM, but it is also available smaller (to match the different sizes of the PIR detectors) and the frames are available in white or gray.

Technical specifications
Lowering to size M (JA-151P-xx) 70x136mm
By: Jablotron
Jablotron JA-193PL-BOX-S Wall mounting box LILLE for JA-111
Model: JA-193PL-BOX-S

JA-193PL-BOX-S is a small wall mount box for JA-111.

The box is designed to mount PIR detectors from the JA-1x1P series, sub-galvanized in brick walls and plaster walls. Using the corresponding frame, you can make the installation go together with the wall.

This can is small, but it is also available in medium (to match the sizes of the detectors). The frames can be found in similar sizes and in the colors white and gray.

Technical specifications

Sub-recess for size S (JA-111P-xx) 70x96mm
By: Jablotron
Jablotron JA-193PL-FMW WHITE frame MEDIUM for built-in box
Model: JA-193PL-F-M-W

JA-193PL-FMW is a white frame for built-in box, intended for immersion of PIR detector. This frame matches the medium can.

 
By: Jablotron
Jablotron JA-193PL-FMG GRAY frame MEDIUM for built-in box
Model: JA-193PL-F-M-G

JA-193PL-FMG is a gray frame for built-in box, intended for immersion of PIR detector. The frame matches a can in size medium.

 
By: Jablotron
Jablotron JA-193PL-FSW WHITE frame SMALL for built-in box
Model: JA-193PL-F-S-W

JA-193PL-FSW is a small, white frame for built-in box, intended for PIR detector immersion. This frame matches the small can.

By: Jablotron
Jablotron JA-193PL-FSG GRAY frame SMALL for built-in box
Model: JA-193PL-F-S-G

JA-193PL-FSG is a small, gray frame for built-in box, intended for immersion of PIR detector. This frame matches the small can.

By: Jablotron
Jablotron PLV-P-ST (PTS) Mounting plate for ceiling
Model: PLV-P-ST

The mounting plate can be used to mount smoke or PIR detectors in the ceiling. The mounting plate is made so that it is easy to hide a cable under the device if you use BUS-based devices. For wireless devices, on the other hand, the mounting plate separates the antenna from the mounting surface, thereby improving the signal range.

By: Jablotron
Jablotron JA-150R Repeater
Model: JA-150R

The JA-150R is a wireless repeater from Jablotron, which in large JA-100 installations can extend the communication distance (up to 300 m) and increase operational reliability. The respect distance between repeaters is 10 m, and the number of repeaters is limited to the number of units in the control panel.

The following are supported by JA-150R : JA-15x and JA-18x detectors, JA-16xJ and JA-15xJ MS hand transmitters, JA-150N and JA-151N PG modules.

 

Technical specifications

excitement 110-230 VAC / 50-60Hz, class protected II.
Internal consumption Internal consumption, typical / maximum Approx. 0.5W / 1W (at 230 VAC)
Backup battery NiCd 4.8V (BAT 4V8 N900) 900 mAh, service life 4 years
Frequency 868.1 MHz
Range Approx. 300 m (open area)
Dimensions 132 x 182 x 45 mm
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
By: Jablotron

New home alarm? Remember these 3 things before you buy

Advice no. 1 - What should your alarm system be able to do?

Overall, there are 3 types of alarms for private homes:

→ Alarm where a security company is notified and is ready to move out.

→ Alarm that notifies you, your neighbors or others you have chosen yourself.

→ Alarm that makes noise but does not notify anyone.

It is clear that an alarm system where a central station sits on standby is a solution at the more expensive end. Conversely, you may also feel most secure with such a solution. Think about what function your alarm should have before you go out and buy something.

Advice #2 - What is your budget?

Get ready in advance how much you are ready to pay for a new alarm. Because as mentioned, prices can fluctuate a lot.

Here it is also relevant to be aware of possible ongoing costs . Often, if you choose a larger security package from a security company, there will be ongoing costs for the subscription. And over a number of years it can be a lot of money.

Advice No. 3 - Choose a product from a recognized manufacturer

If you follow this advice, you will undoubtedly end up with a good burglar alarm. The large manufacturers who continuously develop their products often have good support functions and produce thousands of products every day. This makes the risk of error very small. We can only recommend products from Hikvision, as they are the best on the market.

Video surveillance, anti-theft and much more

Do you have other needs to secure your home or workplace? Here you can read more about and see our products:

Protect your home with an alarm system - this is how you do it

Of course, it also makes good sense to prevent burglaries as best as possible , so that you never need your alarm system.

Here are 4 simple tips :

Become a neighbor helper → Download the free app Nabohjælp and become a neighbor helper.

Outdoor lights and a low hedge → The thief is stressed if there are outdoor lights at your home. And with a low hedge, your neighbors can see if a break-in is in progress.

Make windows and doors difficult to break open → Including good locks, solid frames and window locks.

Store valuables → If the thief can't see anything of value inside, he/she will hopefully drop his venture.

Which alarm system should you choose?

Are you still in doubt about your choice of alarm? Then you are always welcome to contact us by email or telephone. Then we are ready to advise you.

Mail : support@ipcam-shop.dk

Telephone : +45 70701009

To Top