Hikvision iDS-7204HQHI-M1 / S 4 Channel AcuSense HD-TVI DVR
Model:
iDS-7204HQHI-M1/S
| iDS-7204HQHI-M1/S | iDS-7208HQHI-M1/S | iDS-7216HQHI-M1/S | |
| Motion Detection 2.0 | |||
| Human/Vehicle Analysis | Deep learning-based motion detection 2.0 is enabled by default for all analog channels, it can classify human and vehicle, and extremely reduce false alarms caused by objects like leaves and lights; Quick search by object or event type is supported; |
||
| Perimeter Protection | |||
| Human/Vehicle Analysis | Up to 2-ch | Up to 4-ch | |
| Recording | |||
| Video compression | H.265 Pro+/H.265 Pro/H.265/H.264+/H.264 | ||
| Encoding resolution |
Main stream: |
||
| Sub-stream: WD1/4CIF@12 fps; CIF@25 fps (P)/30 fps (N) |
|||
| Video bitrate | 32 Kbps to 6 Mbps | ||
| Dual stream | Support | ||
| Stream type | Video, Video & Audio | ||
| Audio compression | G.711u | ||
| Audio bitrate | 64 Kbps | ||
| Video and Audio | |||
| IP video input | 1-ch (up to 5-ch) Enhanced IP mode on: 2-ch (up to 6-ch), each up to 4 Mbps |
2-ch (up to 10-ch) Enhanced IP mode on: 4-ch (up to 12-ch), each up to 4 Mbps |
2-ch (up to 18-ch) Enhanced IP mode on: 8-ch (up to 24-ch), each up to 4 Mbps |
| Up to 6 MP resolution | |||
| Support H.265+/H.265/H.264+/H.264 IP cameras | |||
| Analog video input | 4-ch | 8-ch | 16-ch |
| BNC interface (1.0 Vp-p, 75 Ω), supporting coaxitron connection | |||
| HDTVI input | 4 MP@30 fps, 4 MP@25 fps, 3 MP@18 fps, 1080p30, 1080p@25 fps, 720p@60 fps, 720p@50 fps, 720p@30 fps, 720p@25 fps *: The 3 MP signal input is only available for channel 1 of iDS-7204HQHI-M1/S, for channel 1/2 of iDS-7208HQHI-M1/S, and for channel 1/2/3/4 of iDS- 7216HQHI-M1/S. |
||
| AHD input | 4 MP, 1080p@25 fps, 1080p@30 fps, 720p@25 fps, 720p@30 fps | ||
| CVBS input | PAL/NTSC | ||
| CVBS output | 1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480 | ||
| HDMI/VGA output | 1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, HDMI/VGA simultaneous output | ||
| Audio input | 1-ch (up to 8-ch is optional), RCA (2.0 Vp- p, 1 KΩ) | 1-ch (up to 8-ch is optional), RCA (2.0 Vp-p, 1 KΩ) | 1-ch, RCA (2.0 Vp-p, 1 KΩ) |
| 4-ch via coaxial cable | 8-ch via coaxial cable | 16-ch via coaxial cable | |
| Audio output | 1-ch, RCA (Linear, 1 KΩ) | ||
| Two-way audio | 1-ch, RCA (2.0 Vp-p, 1 KΩ) (using the first audio input) | ||
| Synchronous playback | 4-ch | 8-ch | 16-ch |
| Network | |||
| Remote connection | 32 | 64 | 128 |
| Network protocol | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnPTM, HTTPS, ONVIF | ||
| Network interface | 1, RJ45 10/100 Mbps self-adaptive Ethernet interface | 1, RJ45 10/100/1000 Mbps self-adaptive Ethernet interface | |
| Wi-Fi | Connectable to Wi-Fi network by Wi-Fi dongle through USB interface | ||
| Auxiliary interface | |||
| SATA | 1 SATA interface, up to 10 TB capacity for each disk | ||
| Serial interface | RS-485 (half-duplex) | ||
| USB interface | Front panel: 1 × USB 2.0; Rear panel: 1 × USB 2.0 |
Front panel: 1 × USB 2.0; Rear panel: 1 × USB 3.0 |
|
| Alarm in/out | N/A (optional to support) | ||
| General | |||
| Power supply | 12 VDC, 1.5 A | 12 VDC, 2 A | |
| Consumption (without HDD) | ≤ 18 W | ≤ 24 W | |
| Working temperature | -10 °C to 55 °C (14 °F to 131 °F) | ||
| Working humidity | 10% to 90% | ||
| Dimension (W × D × H) | 315 × 242 × 45 mm (12.4 × 9.5 × 1.8 inch) | ||
| Weight (without HDD) | ≤ 1.16 kg (2.6 lb) | ≤ 1.78 kg (3.9 lb) | ≤ 2 kg (4.4 lb) |
SADP
Hik-ConnectThere is no reviews yet. Be the first to write us your opinion
