Jablotron JA-152P Wireless PIR Detector WHITE LENS 12 m / 90 degrees
The JA-152P is a wireless PIR detector that runs to the JABLOTRON 100+ line and is used to detect movement in a building or in a room. The unit has a guaranteed coverage of 90 ° / 12 meters. The detector is suitable for the protection of particularly exclusive locations, as it complies with the highest standards of quality and design on the market. The design makes it possible for the detector to practically blend in with the wall, therefore it can easily be installed on a wall surface, with a JA-196PL-S bracket, or up in the corner, in a classic way.
If you want to install the detector in the ceiling, or more demanding angled positions, you can use a JA-191PL bracket.
The sensitivity of the device (risk of false alarm) can be set on two different levels and it has standard immunity to white light (6000 lux). In addition, the device can be used to control programmable PG outputs and also has pulse activation.
The device is addressable and takes up space in the system.
Note that the detector can only be used on the JA-103K and JA-107K and that it is compatible with F-Link 2.0.0 or higher.
|F-Link 2.0.0 and higher
|1 lithium battery, type CR123A (3 V / 1500 mAh)
|Typical battery life
|4 years (in Smartwatch mode)
|ca. 300 m - open terrain
|Recommended installation height
|2.2 - 2.5 m above the floor
|Detection angle / coverage
|90 ° / 12 m
|62 x 110 x 40 mm
|-10 ° C to + 40 ° C
There is no reviews yet. Be the first to write us your opinion