Jablotron JA-162PW (G) Gray lens Wireless combined PIR / microwave detector
JA-162PW (G) is a wireless gray combined PIR and microwave detector from Jablotron's line "JABLOTRON 100+". With this device it is possible to detect human activity in a building. The detector is also good for avoiding false alarms, due to its clever combination of PIR and microwave detection. When the PIR detector detects motion, the microwave detection will be reset to confirm that someone is present in the monitoring area.
The detector lens is gray, and actually has an increased immunity to white light, which is far above the standard requirements (up to 10,000 lux). The reduction of false alarms is also helped along the way by this, eg light from car headlights, a sunset or reflective surfaces. It is possible to set the immunity against false alarms on two levels - PIR or MW. Note that the device occupies a space in the system, and also uses pulse response.
This unit is compatible with the JA-103K and JA-107K control panels.
Technical specifications
Excitement: | 2 lithium batteries, type CR123A (3 V / 1500 mAh) - batteries not included. |
Typical battery life: | 4 years |
Low battery condition: | <2.7 V |
Standby power consumption: | 65 μA |
Max. power consumption: | 50 mA |
Communication: | 868.1 MHz, JABLOTRON protocol |
Max. radio frequency (ERP): | 25 mW |
Communication range: | ca. 300 m (open area) |
Recommended installation height: | 2.2 - 2.5 m above the floor |
Detection angle / PIR coverage area: | 90 ° / 12 m |
Detection angle / MW coverage area: | 80 ° / 12 m |
MW frequency: | 24.125 GHz |
Max. MW Radio Frequency (ERP): | 30 mW |
Dimensions: | 150 x 63 x 40 mm |
Weight (without batteries): | 125 g |
Operating temperature: | -10 ° C to + 40 ° C |
Average operating humidity: | 75% RH, non-condensing |
There is no reviews yet. Be the first to write us your opinion