Dahua PFA136 junction box
Aluminium junction box for compatible Dahua cameras, providing space for cables and connections behind the camera.
- For compatible Dahua cameras
- Provides space for cables and connections
- Made of aluminium
- Can support up to 1 kg
- Dimensions: Ø110 × 34 mm
- M20 / G1/2" cable thread
- White finish
DH-PFA136 is a junction box from Dahua that is mounted behind a compatible surveillance camera. It provides extra space for cables, plugs and connections, helping create a tidier installation and allowing the connections to be placed close to the camera.
| Technical specifications | |
| Model | DH-PFA136 |
| Product type | Junction Box |
| Material | Aluminum |
| Colour | White |
| Dimensions | Ø110.0 × 34.0 mm |
| Thread | M20 (G1/2") |
| Load bearing | Up to 1.0 kg |
| Weight | 0.19 kg |
| Operating temperature | -40 °C to +60 °C |
| Operating humidity | 0–90% RH |
| Compatibility | Designed for selected Dahua cameras; compatibility depends on camera model |
| Package contents | 1 × Junction box, 3 × M4×10 screws, 3 × ST4×25 screws, 3 × plastic anchors, 1 × water joint, 1 × wrench |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Junction box for Dahua cameras
PFA136 is used as a mounting base between the camera and the wall or ceiling. The extra space behind the camera makes it easier to connect the network cable, power and other connections without having all the plugs visible around the camera.
This gives you a neater installation and can also make it easier to access the connections during later service.
Space for cables and connections
The junction box provides space behind the camera for, for example, network connectors, power connections and other cables.
This is especially practical at installation sites where the cables cannot be routed directly through the wall or ceiling behind the camera.
Made of aluminium
PFA136 is made of aluminium and has a white finish that matches many of Dahua’s cameras.
Can support up to 1 kg
The junction box can support camera equipment weighing up to 1 kg.
It is therefore important to check the camera model’s weight and compatibility before installation.
Cable entry with G1/2" thread
PFA136 has M20 / G1/2" threading for cable routing.
A cable gland is included, which can be used to route cables into the junction box.
Mounting accessories included
The package contains the junction box as well as screws, plugs, cable gland and tools for installation.
Compatibility
DH-PFA136 fits selected Dahua cameras. Therefore, always check the camera’s accessories overview before ordering.
Compatible Dahua accessories can be found under the Accessories tab.
Technical key points
- Model: DH-PFA136
- Type: Junction box for camera
- Material: Aluminium
- Can support up to 1 kg
- Dimensions: Ø110 × 34 mm
- Cable thread: M20 / G1/2"
- Colour: White
- Weight: Approx. 0.19 kg
- Operating temperature: −40 °C to +60 °C
- Operating humidity: 0 to 90 % RH
- Included: 3 × M4 × 10 screws
- Included: 3 × ST4 × 25 screws
- Included: 3 × plugs
- Included: 1 × cable gland
- Included: 1 × tool
