Uniview TR-CM08P-A plastic threaded mount with 1/4"-20 UNC for bullet camera
Plastic threaded bracket with external 1/4"-20 UNC thread for mounting bullet cameras
- External 1/4"-20 UNC thread (male)
- Mounts to wall or ceiling via back plate
- Central cable hole for hidden cable routing
- 360° horizontal adjustment
- -107° to 107° vertical adjustment
- Made of PC and PP plastic
- IP54 rated
- Indoor and outdoor use
TR-CM08P-A is a plastic threaded bracket used for mounting bullet network cameras. The camera screws directly onto the bracket via the external 1/4"-20 UNC thread, providing a stable and secure mount. The bracket is fixed to a wall or ceiling and allows for a discreet installation with hidden cable routing.
| Datablad |
| Parameter | Description |
| Application scenarios | Indoor/outdoor |
| IP rating | IP54 |
| Dimensions | 183mm×97mm×70mm |
| Adjustment angle | Horizontal: 0° to 360° Vertical: -107° to 107° |
| Material | PC&PP |
| Weight | 76.5g |
There is no reviews yet. Be the first to write us your opinion
Threaded mounting with standard 1/4"-20 UNC
External 1/4"-20 UNC thread
The bracket is equipped with an external 1/4"-20 UNC thread. It's a common standard used on many bullet cameras. The camera screws directly onto the thread and is mechanically fastened to the bracket.
The threaded connection provides a stable and precise mounting that keeps the camera securely in place over time.
Mounting on wall or ceiling
The bracket is mounted to a solid surface via the back plate. The back plate has pre-drilled screw holes, making it easy to secure the bracket firmly to a wall or ceiling.
This makes the solution suitable for both private installations and commercial environments.
Fits
The bracket is compatible with the following Uniview series:
- IPC24XLP series
- IPC2A2X series
- IPC2C2X series
We always recommend checking compatibility on the camera's accessories tab to make sure the bracket and camera match correctly.
Hidden cable routing
The back plate has a central cable hole so cables can be routed from the rear. This allows for a more discreet installation where plugs and joints are hidden behind the bracket.
It contributes to a neater and more professional result.
Flexible angle adjustment
The bracket allows 360° horizontal adjustment and -107° to 107° vertical adjustment. That means you can fine-tune the camera's direction precisely to cover the area you need.
The wide range of adjustment makes it easier to achieve correct coverage, even if the mounting point isn't perfectly placed.
Light and practical construction
The bracket is made of PC and PP plastic. That makes it easy to handle during installation and suitable where a discreet solution is desired.
The construction is stable and solid while keeping the weight down.
Suitable for indoor and outdoor use
With an IP54 rating, the bracket is protected against dust and water splashes. It can therefore be used both indoors and outdoors, as long as it is not exposed to direct heavy water impact.
Accessories
Under the accessories tab you can see which cameras and mounting solutions fit this bracket.
Key technical points
- Type: Plastic threaded bracket
- Thread: 1/4"-20 UNC (external / male)
- Application: Wall or ceiling mounting
- Material: PC and PP plastic
- IP rating: IP54
- Horizontal adjustment: 0° to 360°
- Vertical adjustment: -107° to 107°
- Dimensions: 183 × 97 × 70 mm
- Weight: 76.5 g
