Jablotron

JA-186P (pet) is a wireless dual PIR detector 120 ° / 12m, is created for washable environments and makes it possible to have surveillance, even if you have animals in the house, for example. This is possible because it is a dual element detector, so both sensors must be triggered for an alarm to be triggered. Since the normal mounting height is 120 cm above the floor, the top sensor will avoid being triggered by pets. The coverage angle of the detector is 120 ° and the distance is 12 m. The height at which the PIR detector is mounted dictates the dividing line between the two PIR elements.

Note that the detector IS addressable and takes up space in the control panel.

Supply voltage	Lithium type LST14500 (3.6V AA)
Battery life	about 3 years (5 min sleeping mode)
Frequency	868 MHz
Range	ca. 300 m - open terrain
Mounting height	1.2 m
Coverage PIR	120 ° / 12 m (standard lens)
Mode of operation	2 x Passive infrared
Operating temperature	-10 ° C to + 40 ° C
Dimensions	180 x 60 x 55 mm
Installation environment	Indoors

JA-112M BUS is a module made for connecting wired magnets. The device both communicates and is supplied through the BUS cable. It is possible to set the unit for reverse input response and in addition, the time for activation at input can be adjusted (from 0.15 to 300 sec). The unit has two programmable and independent inputs NC, NO or balanced with resistors.

Note that the unit occupies two seats in the control panel.

Voltage from the central bus	12 V (9 ... 15 V)
Power consumption in standby mode	5 mA
Power consumption with cable	10 mA
Max. length of cable	100 m
Dimensions	110 x 44 x 26 mm
Operating temperature	-10 ° C to + 40 ° C
Installation environment	Indoors

JA-111M is a small BUS magnetic contact. It is quite suitable for both home and business, with its smart small size. It can be mounted on doors / windows where it responds to opening. It communicates with the exchange through BUS. In addition, the unit has a tamper switch on the lid, to prevent the unit from being opened inappropriately.

Note that the switch takes up one space in the control panel.

Voltage via the central bus	12v (9 ,,, 15 v)
Standby consumption	5 mA
Dimensions	55 x 27 x 16 mm
Operating environment in accordance with EN 50131-1	II. Indoor general
Operating temperature range	-10 ° C to + 40 ° C

JA-110B BUS is a glass break detector that is supplied and communicates through the control panel's BUS. It detects broken glass with its dual detection technology that analyzes air pressure and sound. The sensitivity of the device is adjustable and it also has SMARTMEMORY function that provides LED indication of alarm. The function can be switched off if you prefer.

The detector takes up one space in the control panel.

Technical specifications

Voltage via the control panel'S BUS	12 V (9-15 V)
Standby consumption	5 mA
Recommended installation height	2.5 m above the floor
Coverage area	up to 9 m
Minimum window glass size	0.6 x 0.6 m
Stabilization time after ignition	max 60 s
Dimensions	40 x 100 x 22 mm
Environment Indoors	In accordance with EN-50130-4, EN 55022
Operating temperature range	-10 ° C to + 40 ° C

JA-111SH BUS is made to detect vibrations on doors / windows, caused by an external attempt to force itself through. It is possible to adjust the sensitivity of the detector, depending on the subject that requires protection. The detector has a tilt function so that it can also be used to secure works of art or safes, and can easily be mounted on things that must not be taken down without an alarm. You choose whether you want to use the device as a vibration detector or tilt detector, with a jumper.

Technical specifications

Voltage via the control panel'S BUS	12 V (9 - 15 V)
Standby consumption	5 mA
Power consumption for cable selection	5 mA
Operating temperature	-10 ° C to + 40 ° C
Dimensions	55 x 27 x 16 mm
Installation environment	Indoors

The JA-152NM is a wireless module that can be used to lock a door or window when the alarm is switched on, which it does by following a PG output integrated in a mechanical lock. For optimal operation, the handle must be locked in its normal position. However, the lock is not certified as an electronic security detector.

A magnetic switch built into the module can monitor whether the door / window is open or closed - it does not detect burglary. In addition, the module has an optional function that can unlock automatically in the event of a fire alarm from a detector. Remember to check if the door / window is suitable for the unit before installation.

The module is addressable and takes up a space in the control panel.

Please note that it only works with firmware 18 and F-link 1.4.0 or later and is only used for the JABLOTON 100 system.

excitement	2 AA Alkaline batteries (LR6) 1.5 V 2400 mAh
Battery life	ca. 2 years (1 lock and unlock per day)
Frequency	868.1 MHz Jablotron protocol
Range	ca. 300 m - open terrain
Dimensions	229 x 34 x 18 mm
Operating temperature	-20 ° C to + 60 ° C
Installation environment	Indoors

JA-152M is a wireless "invisible" magnetic switch that tells about opening either door or window. The magnet is mounted in the window / door and the transmitter in the frame. This means that you have an invisible / discreet installation. The magnetic switch fits the EURO standard windows.

Please note that the magnetic switch can only be used with the control panels JA-103 and JA-107.

Technical specifications

excitement	Lithium type BAT-3V0-CR2032
Battery life	about 3 years at 5 daily activations
Frequency	868 MHz
Range	ca. 200 m - open terrain
Operating temperature	-10 to +40 c
Dimensions	192 x 25 x 9 mm
Installation environment	Indoors

JA-183M is a small wireless magnetic switch, for doors and windows, which detects when opened. It works by removing a magnet from the transmitter when the door or window is opened. When the detector is activated, it can either start an entry time or send an alarm immediately.

Note that the detector has no input for external devices

Technical specifications

Supply voltage	Lithium type CR-123 (3.0V)
Battery life	ca. 3 years for 20 daily activations
Frequency	868 MHz
Range	ca. 300 m - open terrain
Dimensions house	75 x 31 x 23 mm
Dimensions magnet housing	56 x 16 x 15 mm
Dimensions magnet	10 x 4 mm
Operating temperature	-10 ° C to + 40 ° C
Installation environment	Indoors

JA-182M is a wireless and almost invisible magnetic contact, which tells you if something (door or window) opens. The almost "invisible" magnet is mounted in the window / door, and the transmitter is mounted in the frame. This gives you a discreet installation. The magnetic switch fits in the EURO standard windows.

Technical specifications

Supply voltage	Lithium type CR 2354 (3.0V)
Battery life	about 3 years at 5 daily activations
Frequency	868 MHz
Range	ca. 200 m - open terrain
Operating temperature	-10 to +40 c
Dimensions	192 x 25 x 9 mm

The JA-185B is a mini wireless glass break detector that can also be nicely installed in a car. It can detect broken glass within a radius of 9 meters. This is done by analyzing the air pressure in the room. If a change occurs at the same time as the sound of glass being smashed, it activates an alarm. To prevent false alarms, the detector uses digital signal processing.

Technical specifications

excitement	Lithium type LST14505 (3.6V AA)
Battery life	about 3 years (5 min sleeping mode)
Frequency	868 MHz
Range	ca. 100 m - open terrain
Coverage	Up to 9m
Mode of operation	Acoustic
Operating temperature	-10 ° C to + 55 ° C
Dimensions	46 x 88 x 22 mm
Installation environment	Indoors

JA-180B is a mini wireless acoustic glass break detector, to mount on a flat surface that can detect glass break within a radius of nine meters. In addition, the detector also analyzes the air pressure in the room. A change of this, along with the sound of glass being smashed, activates an alarm. To reduce the risk of false alarms, it uses the digital signaling process. In addition, this detector has a high degree of immunity to RF jamming and the like. The device's detection sensitivity can be easily adjusted according to the distance and dimensions of the windows that require protection.

 

Technical specifications

excitement	Lithium type LST14505 (3.0V AA)
Battery life	ca. 3 years (5 min sleeping mode)
Frequency	868 MHz
Range	ca. 100 m - open terrain
Coverage	Up to 9m
Mode of operation	Acoustic
Dimensions	107 x 28 x 24 mm
Installation environment	Indoors

JI-112C IP Indoor / Outdoor Camera 2MP - BULLET

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

• When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
• Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
• It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

• You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
• In addition, you get a complete history available; and can at any time check this to find out what happened in the building at a particular time.

Live video

• Can be started from the MYJABLOTRON mobile app or over the internet.
• You can always check what's going on at the camera's location.
• It takes about 10 seconds to connect to the camera, with a normal internet connection.

 

JI-111C IP Indoor / Outdoor Camera 2MP - DOME

The installation of the camera is so simple that you can easily do it without advanced knowledge of IT technologies. They are fully integrated into the MyJABLOTRON application and work with the JABLOTRON 100 system via the cloud. It allows you to find all the information about your premises, in one place.

The camera records color videos in HD or Full HD resolution and if the lighting conditions are not optimal, it switches to night mode with IR (infrared) lighting.

Basic camera features:

Video sequences

• When an event, such as an alarm, is detected, the camera records a video 30 seconds before and after.
• Hereby the camera shows both the cause of the incident and what happened immediately afterwards.
• It is also possible to request the creation of a sequence from the MyJABLOTRON app.

Recording

• You can get continuous video storage with optional history (3 or 7 days - with subscription at jablotron).
• In addition, you get a complete history available; and can check this at any time to find out what happened in the building at a particular time.

Live video

• Can be started from the MYJABLOTRON mobile app or over the internet.
• You can always check what's going on at the camera's location.
• It takes about 10 seconds to connect to the camera, with a normal internet connection.

 

JA-157P is a wireless outdoor detector with curtain lens, from Jablotron. The device is capable of detecting human movement outside the building. It does this via a dual-zone outdoor detector, with a 5 ° detection angle, made by OPTEX. The unit is suitable for narrow places, such as balconies, shafts or doorways.

The detector due to its dual-PIR system, a high degree of immunity to false alarms. In addition, it has three tamper switches and is equipped with anti-mask function.

The unit also has a built-in transmitter for the JABLOTRON 100 system.

Note that this detector is a replacement for the JA-187P.

Technical specifications

excitement	1x type CR123A (3 V / 1500 mAh) lithium battery
Battery life	up to 3 years (with 120 sec. power saving function)
Frequency	868.1 MHz, JA-100 protocol
Range	up to 300 m - open terrain
Mounting height	0.8 - 1.2 m
Coverage area	2 or 5 m / 5 °
The speed of movement of the object	0.3 - 1.5 m / sec
Max. humidity	95%
Operating temperature	-20 ° C to + 60 ° C
Dimensions	34 x 154 x 43 mm
Installation environment	Outdoor

JA-158P is designed to detect human movement in a monitored outdoor area. It does so with its dual-zone PIR sensor made by OPTEX. However, the transmitter is by Jablotron. The PIR sensors have non-overlapping 94-zone detection, thus avoiding disturbing detections of small animals. The device's power is supplied by lithium batteries, and the detector can even find out to report low battery status to the control panel.

The device has both anti-mask function and a tamper switch on both the front and back, which can notify you if the device is removed from the wall or if the front is removed.

The detector periodically performs self-tests and forwards the results to the control panel.

Technical specifications

excitement	3 pieces. Lithium type LS (T) 14500 (AA 3.6V 2000 mAh) or 3 CR123A
Battery life	Up to 3 years with two batteries and up to 4 years with 3 (120 sec. Sleep mode)
Frequency	868 MHz
Range	Up to 300 m - open terrain
RF strength	<10 mV
Mounting height	2.5 - 3.0 m
Coverage area	12 m / 85 ° (94 segments)
Battery saving function	Either 5 or 120 sec.
LED indicator	Only in test mode
Humidity	95%
Operating temperature	-20 ° C to + 60 ° C
Closeness	IP55
Installation environment	Outdoor

The JA-151IR is an active infrared optical barrier detector with four "shots." It is designed to detect movement through the "shot," in the monitored area.

OPTEX has developed the barrier detector, but it is equipped with a transmitter belonging to the JABLOTRON 100. Due to the optical part of the device's four-shot, it has a high immunity to false alarms. The detector records two zones in the system, both of which periodically self-test and send status to the control panel.

 

The detector uses 4 x BAT-3V6-R20 (3 years life), el. 8 x BAT-3V6-R20 (up to 6 years of life). The batteries are sold separately.

Technical specifications

excitement	4x (8x) type LSH20 lithium batteries (3.6 V / 13 Ah)
Battery life	Up to 3 years * (6 years) * * with 120 sec power saving function
Frequency	868.1 MHz, JA-100 protocol
Range	Up to 300 m - open terrain
Mounting height	0.7 - 1.0 m
Distance between units	max. 100 m
Max. humidity	95%
IP class	IP65
Operating temperature	-20 ° C to + 60 ° C
Dimensions (HxWxD)	452x83x138 mm
Installation environment	Outdoor

JA-1X1A-C-ST is a brushed steel lid with red strobe. The lid fits Jablotron's JA-111A, JA-151A and JA-163A.

 

Technical specifications

Color	Silver / stainless
The color of the signal mask	Red
Weight	1.01 kg
Dimensions	200 x 300 x 61 mm