Netværk til overvågning

Rack screws with nuts and washers

• For mounting the NVR in a rack
• For mounting a switch in a rack

 

Allows you to send network and PoE over coax cables

• Use your old coax cables to upgrade to IP surveillance.
• Run PoE so you don't need separate power supplies.

The kit is well suited for locations where you want to upgrade an existing installation to IP surveillance.

PoE Injector
60W
50V

Cable that can withstand prolonged sunlight

• 100 meters on a roll
• Cat. 6e
• U7UTP
• Black (PVC)

Built-in SIM card slot
4G LTE / 3G with up to 150 Mbps download
Fail-safe Internet with fixed line and mobile Internet support
Wireless N300 (300 Mbps at 2.4 GHz)
Fast Ethernet WAN + 4 x Fast Ethernet LAN

• Small easy Nano router

Wall-mounted 600 mm wide shelving cabinet designed for installation
of both cables and equipment. Suitable for several applications
including local area network (LAN) cables and hardware, and
encapsulation of surveillance and audiovisual equipment.

This power plug consists of 5x earthed Danish type K sockets with a 3 meter power cord, ready for mounting in a 1U rack cabinet.

4.3" IPS test monitor with touch screen

• ONVIF
• DC12V 2A power output / DC 48V PoE power output
• HD TVI camera test
• IP discovery, Auto search the entire network segment IP
• Auto login and display the camera image, activate Hikvision camera quickly
• Hik test tool/ Hikvision camera brands test /IPC viewer
• Support TVI 300 mgea test
• Support TVI, CVI, AHD, and CVBS

18 port switch for all types of video surveillance, ready for fiber.

• 16 PoE ports for cameras, 2 uplink ports and two SFP ports for fiber
• 3 modes: Normal, Secure and Surveillance
• up to 30 watts per port, can drive even many small PTZ cameras
• up to 250 meters PoE in surveillance mode
• can be mounted in racks, brackets included.
• metal housing

Hikvision's smart managed * switches are ideal for video surveillance, as they provide power to all types of Active PoE devices, including brands other than Hikvsion. However, if you use it for Hikvision's own products, you get an extra advantage, namely the advantage of their "extend" technology. PoE extend means that you can connect devices up to 300 meters away from the switch, where conventional switches can reach a maximum of 70 meters with PoE.

The switch can deliver up to 30 watts on each port - but the total PoE power consumption must not exceed 370 watts. For example, a PTZ like this DS-2DE4225IW-DE uses a maximum of 18 watts, leaving 362 watts for the remaining ports / cameras. For reference, a camera like this DS-2CD2346G2-IU uses approx. 7 watts.

The switch can take SFP modules, for fiber connection:

* Managed switches mean that you can manage the switch, ie you can configure it for VLAN, priorities etc. Switches like this are recommended for users with a deeper knowledge of networks and with a specific need to configure the switch. Of course, the DS-3E1318P-EI can also be "just" set to out-of-the-box, like a regular switch.

Watch a video about Hikvision smart switch here (English): https://www.youtube.com/watch?v=wU-bqihJdbo

This switch is designed to power up to 4 PoE products, such as cameras - however with a maximum of 15.4 watts on each port, which in short means that it can drive 4 pcs. ordinary cameras, but if you need a PTZ camera or larger cameras with a power consumption of more than 15.4 watts, we recommend us ...more

- Hikvision 60W PoE injector- 1xRJ45 interface 1000M- Power capacity: 60W- OEM

Bosch 60W PoE injector for large cameras that need more power on PoE

• High PoE and PoE+
• Suitable for larger cameras, such as the MIC series and PTZ cameras.
• On the camera's product page, you can see which mounts are compatible under the 'Accessories' tab.

MicroOptics SFP transceiver module

• Transceiver module - GigE
• 1 Gbps
• 550m

500 Mbit / s
Passthrough