Hikvision DS-3E1318P-EI 16-port PoE+ Smart Switch
Hikvision 16-port managed PoE switch for IP cameras and surveillance networks
- 16 PoE ports for cameras and other network devices
- Managed switch with options for network control and monitoring
- 230 W total PoE power for multiple cameras on the same switch
- Up to 300 meters PoE reach for long cable runs
- PoE watchdog automatically restarts cameras that stop responding
It’s a managed switch, which means it can be monitored and configured via Hikvision platforms such as Hik Central and Hik Partner Pro.
PoE switch for cameras and surveillance networks
DS-3E1318P-EI is a smart managed PoE switch designed for video surveillance. It provides a stable network connection for cameras, recorders and other devices in the system.
The switch’s features make it easier to install, monitor and maintain a surveillance network, both locally and via remote access.
Managed switch with network management
DS-3E1318P-EI is a managed switch, which means it can be monitored and configured via software. That gives you far better control over the network than a regular plug-and-play switch.
You can, for example, view port status, monitor bandwidth, check PoE power consumption and restart ports directly from the management interface. That makes it easier to find faults and keep a larger surveillance network stable.
The switch can be managed via a web interface or via Hikvision platforms such as Hik Central and Hik Partner Pro.
16 PoE ports for cameras
The switch has 16 PoE ports that can deliver power directly to IP cameras over the network cable. That means the cameras don’t need separate power supplies.
This simplifies installation and lets you centralize power in the network cabinet.
Total PoE power of 230 W
The switch can deliver up to 230 watts total PoE power to connected devices. That makes it possible to power many cameras from a single switch.
Power is distributed automatically among the ports depending on which devices are connected.
Long reach up to 300 meters
The switch supports extended PoE reach, allowing you to connect cameras up to 300 meters away. This can be useful in large buildings, warehouses or outdoor installations.
The actual range may vary depending on cable type and camera model.
PoE watchdog
The PoE watchdog function monitors the cameras on the network. If a camera stops responding, the switch can automatically restart the port.
That means many issues can be resolved automatically without a technician having to visit the site.
VLAN network segmentation
The switch supports VLAN, which lets you split the network into separate groups. That can improve network stability and make it easier to manage larger installations.
By segmenting the network, different devices can be isolated from each other, which can increase security.
Loop protection
Loop protection prevents network faults that can occur if cables are connected incorrectly and create a network loop. Such loops can, in the worst case, cripple an entire network.
This feature helps keep the network stable and ensure normal operation.
Priority ports for critical cameras
The switch supports priority ports, where specific cameras can get higher priority on the network. This is useful for cameras monitoring critical areas.
If the network is congested, these ports will still get sufficient bandwidth.
Network monitoring and administration
The switch can be managed via a web interface or Hikvision software. Here you can monitor the network, view port status and check PoE power consumption on the ports.
That gives a clear overview of the system’s condition and makes it easier to troubleshoot.
Cable testing and troubleshooting
The switch can analyze network cables and help find faults such as breaks or short circuits. It can also show cable length.
That speeds up troubleshooting, especially in larger installations with many cameras.
Surge protection
The switch has built-in surge protection, which helps protect equipment from electrical disturbances.
This can be important in installations where cables run outdoors or in areas with electrical noise.
Accessories
There are various SFP modules and network accessories available for this switch depending on the installation. These can be used for fiber connections or to expand the network.
Under the accessories tab you can see which modules and accessories fit the switch.
Technical highlights
- Model: DS-3E1318P-EI(B)
- Switch type: Smart managed PoE switch
- PoE ports: 16
- Uplink ports: 2 gigabit combo ports
- PoE standard: IEEE 802.3af and 802.3at
- Maximum PoE power per port: 30 W
- Total PoE budget: 230 W
- PoE range: up to 300 meters
- Surge protection: 6 kV
- MAC table: 16K
- Mounting: rack
- Power supply: 100 to 240 V AC
- Dimensions: 440 × 44 × 220.8 mm
- Weight: approx. 2.6 kg
