Uniview Gigabit managed PoE switch 4+1 Cloud 30/65W
6-port Gb switch for video surveillance and access points with remote management
- 4 PoE ports for cameras and devices
- Remote management via app and QR code
- Up to 250 m PoE reach
- 65W total PoE budget
- Gigabit ports for high speed
- No fans – completely silent
- Easy setup via web interface
- Port priority for critical hardware
- VLAN, link aggregation and loop detection
- Remote reboot of PoE ports
| Datablad | Manual | QuickGuide |
• Supports visiting the cloud by scanning the QR code. Allows to view the device status in real time on the app, and remotely restart the PoE power supply.
• Supports PoE power supply ; allows to enable or disable PoE power supply for the powered device; allows up to 250m power supply using a standard network cable.
• Supports the extend mode for up to 250m communication range and 10Mbps auto-negotiation rate.
• Supports port priority. The priority port will be powered first when the PoE power supply is full.
• All metal casing, secure and reliable.
There is no reviews yet. Be the first to write us your opinion
A user-friendly 6-port managed PoE switch with remote control option
This Uniview NSW2100-6GT-POE-IN is a compact, reliable PoE switch designed for small networks, shops, businesses and surveillance setups. It gives you 4 PoE ports for cameras or other devices and 2 extra Gigabit ports for uplink or expansion. The switch supports cloud management via an app, so you can easily check status, monitor PoE consumption and remotely reboot devices if they freeze.
It’s built in a sturdy metal housing with no fans, and offers VLAN, link aggregation, loop detection and port priority for stable operation. With Extend Mode you can reach up to 250 meters using standard Ethernet cables, making it especially suitable for cameras placed far away.
Remote management and app access
Installation is incredibly simple: scan the QR code and the switch can be monitored via the app. You can view current status, ports, power usage, traffic speeds and even reboot PoE devices without having to be physically at the unit.
Web interface for configuration
The switch can be configured through a standard web browser. Here you get access to ports, VLANs, priorities, link aggregation, loop detection, port mirroring and firmware updates—all presented in a clear, easy-to-navigate menu.
PoE support with up to 250 m reach
The 4 RJ45 ports provide PoE (802.3af/at) with up to 30W per port. In Extend Mode you can extend the network cable up to 250 meters at 10 Mbps.
Port priority
Ports 1 and 2 have priority, so important hardware—e.g. a recorder, router or critical cameras—always get power first, even if the switch approaches its maximum PoE budget.
Metal housing and silent operation
The switch is housed in metal with no fans, which results in low heat, quiet operation and longer lifespan. Ideal for both outdoor enclosures and indoor office environments.
VLAN and link aggregation
The switch supports up to 10 VLANs and four link aggregation groups. This lets you segment the network securely and combine ports for higher bandwidth when needed.
Loop detection and port isolation
Prevents network issues caused by cable loops. Port isolation can be enabled for extra security in environments like rental properties or public spaces.
Easy maintenance
The switch supports firmware updates, export/import of configurations and factory reset, making it simple to standardize and service.
Key points
- 4× PoE ports + 2× Gigabit uplinks
- 65W total PoE budget
- 30W per port
- 24/7 cloud management and app support
- Extend Mode up to 250 meters
- VLAN, MAC control and port isolation
- No fan – silent operation
- Robust metal enclosure
- 169 × 132 × 40 mm
- Operating temperature 0 to 45 °C
