Uniview Gigabit Switch PoE 4+1 ext 30/60W
NSW2010-5GT-POE-IN has been discontinued - and replaced by NSW2100-6GT-POE-IN
NSW2100-6GT-POE-IN is an improved version of NSW2010-5GT-POE-IN with various enhancements.
Read much more about it — and everything else — on the product page for the new version: NSW2100-6GT-POE-IN
We've kept the product page for NSW2010-5GT-POE-IN so you always have easy access to the documentation.
5-port Gb switch for video surveillance and access points
- 4 PoE ports for cameras and 1 uplink port for further connections
- 3 modes: Normal, Secure and Surveillance
- up to 30 watts per port, can power many small PTZ cameras
- metal housing
Because the switch is a Gb (gigabit) switch, it has the bandwidth needed to aggregate data streams from other switches or from wireless access points (Wi‑Fi nodes).
| Datablad |
| Model | NSW2010-5GT-POE-IN | NSW2010-10GT-POE-IN | NSW2010-18GT2GP-POE-IN | NSW2010-26GT2GC-POE-IN |
| Ports | 4×1000Mbps PoE ports (RJ45)+1×1000Mbps ports(RJ45) | 8×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45) | 16×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（SFP） | 24×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（Combo） |
| Standards | IEEE802.3,IEEE802.3u,IEEE802.3az,IEEE802.3x,IEEE802.3af,IEEE802.3at | IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az | ||
| Switching capacity | 10Gbps | 20Gbps | 40Gbps | 56Gbps |
| Forwarding performance | 7.44Mpps | 14.88Mpps | 29.76Mpps | 41.7Mpps |
| Packet Buffer | 1M bit | 2Mbit | 4M bit | 4Mbit |
| MAC | 2K | 2K | 8K | 8K |
| Dimensions (W×D×H) | 140mm x 76.7mm x 27.7mm (5.5"×3"×1.1") |
220mm x 150mm x 44mm (8.7"×5.9"×1.7") |
280mm x 180mm x 44mm (11"×7.1"×1.7") |
440mm x 207mm x 44mm (17.3"×8.1"×1.7") |
| Weight | <1kg | <1.24kg | <4.2kg | <5kg |
| Input Voltage | AC: 100-240V, 50/60Hz | |||
| MAX. Power | 65W | 130W | 200W | 400W |
| PoE | 802.3at/af，Mode A：1/2+，3/6- | |||
| Max. PoE Power | Max capacity: 60W Max capacity for single port: 30W |
Max capacity: 120W Max capacity for single port: 30W |
Max capacity: 185W Max capacity for single port: 30W |
Max capacity: 370W Max capacity for single port: 30W |
| Cooling Fans | 0 | 1 | 1 | 2 |
| Operating Temperature | 0°C ~ 40 °C | |||
| Storage Temperature | -40 °C ~ 70 °C | |||
| Operating Humidity | 10% ~ 90% non-condensing | |||
| Storage Humidity | 5% ~ 90% non-condensing | |||
| Indicator | PWR(Green), LNK/ACT(Green), PoE(Orange) | |||
| Working Mode | No | Default(Normal mode) : All ports can communicate with each other. VLAN(Secure mode): Downlink ports can communicate only with uplink ports. EXTEND(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
||
There is no reviews yet. Be the first to write us your opinion
NSW2010-5GT-POE-IN has been discontinued - and replaced by NSW2100-6GT-POE-IN
NSW2100-6GT-POE-IN is an improved version of NSW2010-5GT-POE-IN with various enhancements.
Read much more about it — and everything else — on the product page for the new version: NSW2100-6GT-POE-IN
We've kept the product page for NSW2010-5GT-POE-IN so you always have easy access to the documentation.
Great all-around switch for surveillance and general networking
This switch can be used for most tasks on the network. It requires no configuration — just connect power and a network cable to the camera, recorder, router, etc.
Plug 'n play - requires no configuration
Connect surveillance cameras, access points and other PoE devices directly to one of the 4 PoE ports. After a few seconds it will begin supplying power to the device, which is indicated by a small LED for each port. About 60 seconds after the cable is connected, the device will have booted and can be found on the network.
NDAA Compliant
This means the equipment may even be used in critical infrastructure installations in the USA.
