Hikvision DS-PK1-E-WE AX Pro Wireless Keypad
- Wireless control panel for the AX PRO alarm
- Built-in backlight
- "wakes up" when touched
- Sound indication of pressure
- Many features
- Load via APP
- Up to 2 years battery life
|
DS-PK1-E-WE |
|
|
| RF |
Frequency |
868 MHz |
|
Modulation |
2GFSK |
|
|
Distance |
1200m (open area) |
|
| Interface & component |
Tamper switch |
Supported, front and rear panel tamper-proof |
|
Power switch |
Power on/off |
|
|
Buzzer |
Supported |
|
|
Indicator |
4: fault (orange), enrollment/signal (red/green), arm(blue), disarm(green) and alarm (red) |
|
|
Backlight |
white |
|
|
Key |
Number key: 0 to 9 |
|
| Application & protocol |
Protocol |
Tri-X, two-way communication |
| Electrical & battery |
Power Consumption |
Quiescent current: 180 uA |
|
Battery type |
Four AA batteries |
|
|
Battery life span |
Standby time more than two years |
|
| Others |
Operation humidity |
10% to 90% (No condensing) |
|
Operation temperature |
-10 °C to +55 °C (-4 °F to +122 °F) |
|
|
Color |
White |
|
|
Installation |
Screw mounting |
|
|
Dimension (W x H x D) |
140 (5.50") x 86 (3.38") x 22 (0.87") mm |
|
|
Weight |
Without batteries: 151 g (5.33 oz), and 23 g (0.81 oz)each |
| Android/iOS |
 Hik-Connect |
There is no reviews yet. Be the first to write us your opinion
Our honest opinion about this control panel is that it works well under normal circumstances, but if it sits too close to the siren and the alarm howls, it can be difficult to hear if pressure is being detected and can therefore create some frustration. Therefore it's good to have APP or remote control as backup.
Which areas the control panel should control is determined / programmed from the APP
