PoE splitter 48V to 24V 1A
PoE splitter that separates power and network from a single PoE cable and delivers 24V power to your equipment.
- Converts PoE supply to 24V DC
- 24V DC output with up to 1A
- Supports IEEE 802.3af/at
- 10/100 Mbps network connection
- DC 5.5 x 2.1 mm power connector
- Built-in protection against short circuit, overcurrent, and overtemperature
- Operating temperature from -20 °C to +65 °C
| Datasheet |
| Technical specifications | |
| Model | POE-4824 |
| Product type | PoE splitter, 48 V to 24 V |
| Application | Splits PoE into Ethernet data and 24 V DC power for compatible non-PoE devices |
| Network speed | 10/100 Mbps |
| PoE standard | IEEE 802.3af / IEEE 802.3at |
| PoE power supply mode | 1/2 (+), 3/6 (-) or 4/5 (+), 7/8 (-), dual-mode power supply |
| Network transmission pairs | 1/2, 3/6 |
| Input voltage | 44–57 V DC; compatible with non-standard 48 V DC power supply |
| Rated power | 30 W |
| Output voltage | 23.6–24.1 V DC |
| Output current | 1 A |
| Interfaces | |
| Ethernet interface | 1 × 10/100Base-TX RJ45 |
| DC output connector | 1 × 5.5 × 2.1 mm DC power plug |
| Protection & environment | |
| Protection functions | Short-circuit, over-current and over-temperature protection |
| Operating temperature | -20 °C to +65 °C |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
PoE splitter for equipment with 24V DC power supply
POE-4824 is used when power and network data are combined in a PoE cable, but the connected equipment should not be powered directly via PoE. The splitter separates the connection, so you get standard Ethernet on the RJ45 connector and 24V DC on the separate power connector.
This makes it possible to run both power and data through a single network cable and only split the connections at the equipment that needs to be connected.
24V DC output with up to 1A
The splitter delivers an output voltage of approximately 24V DC with a maximum output current of 1A. The specified output voltage is between 23.6 and 24.1V DC.
Power is delivered through a 5.5 x 2.1 mm DC plug, so the splitter can be used with equipment that matches this voltage, current capacity, and connector type.
PoE input with IEEE 802.3af/at
The PoE input supports IEEE 802.3af/at and accepts an input voltage of 44-57V DC. According to the specifications, both power supply via pins 1/2 and 3/6 as well as via pins 4/5 and 7/8 are supported.
The stated nominal input power is up to 30W.
Network with up to 100 Mbps
POE-4824 supports 10/100 Mbps Ethernet. Network data is carried through the RJ45 connection, while the power is split out to the separate DC connector.
Network transmission uses pins 1/2 and 3/6.
Protection of the power output
The splitter is protected against short circuit, overcurrent, and excessive temperature. This helps protect both the splitter and the connected equipment if power conditions become abnormal.
Technical key points
- Model: POE-4824
- PoE standard: IEEE 802.3af/at
- Input voltage: DC 44-57V
- Output voltage: DC 23.6-24.1V
- Output current: Max. 1A
- Rated output: 24V DC
- Rated power: Up to 30W
- Network speed: 10/100 Mbps
- Network connector: 1 x RJ45 10/100 Base-TX
- Power connector: DC 5.5 x 2.1 mm
- PoE supply: 1/2 (+), 3/6 (-) or 4/5 (+), 7/8 (-)
- Network transmission: 1/2 and 3/6
- Protection: Short circuit, overcurrent, and overtemperature
- Operating temperature: -20 °C to +65 °C
