Waterproof PoE extender for 3 devices
Waterproof PoE extender with 1 input and 3 PoE outputs.
- 1 PoE input and 3 PoE outputs
- Up to 100 Mbps network speed
- Supports IEEE 802.3af/at
- Up to 30 W PoE
- Can extend network and PoE by an additional up to 100 meters
- Possibility of a total cable length of up to 200 meters
- Gets power directly through the PoE input
- Automatic detection of PoE devices
- Plug and play with no configuration
- Waterproof design
POE-013PW is a waterproof PoE extender that distributes one PoE connection to up to three PoE devices while also extending both network and power. It gets its own power through the network cable, so you do not need a separate power supply at the extender.
| Datasheet |
| Technical specifications | |
| Model | POE-013PW |
| Product type | Waterproof 3-port PoE extender |
| Application | Extends Ethernet data and PoE power and distributes one PoE connection to three PoE devices |
| Network ports | 4 × 10/100Base-TX RJ45 |
| PoE input | 1 × 10/100Base-TX upstream PD port (Data/Power) |
| PoE outputs | 3 × 10/100Base-TX PoE ports (Data/Power) |
| Network speed | 10/100 Mbps |
| Transmission distance | Up to 100 m per Ethernet segment; extender enables data and PoE transmission up to 200 m total |
| Network standards | IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| Flow control | IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control |
| Forwarding | Non-blocking wire-speed forwarding |
| PoE | |
| PoE standards | IEEE 802.3af / IEEE 802.3at |
| Maximum PoE output | Up to 30 W per output port |
| PoE detection | Automatic detection of compatible PoE devices |
| Power supply | Powered directly through the upstream PoE connection; no external power supply required |
| Power supply type | 1/2 (+), 3/6 (-) |
| Installation & environment | |
| Installation | Plug and play, no configuration required |
| Enclosure | Waterproof design |
| Operating temperature | -20 °C to +60 °C |
| Cabling | 100BASE-T: Cat3/4/5 UTP up to 100 m; 100BASE-TX: Cat5 or later UTP up to 100 m |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Extend the PoE connection and connect three devices
POE-013PW is designed for installations where standard network cables are not long enough, or where you want to pass one PoE connection on to multiple devices. The extender has one input for network and power, as well as three outputs that can supply both data and PoE.
This makes it well suited for, for example, security installations where several PoE devices need to be placed further away from the existing network connection.
Up to 200 meters total transmission distance
A standard Ethernet connection is normally limited to 100 meters per cable run. POE-013PW works as a repeater and makes it possible to pass both network data and PoE power along.
The extender can therefore be used for installations with a total distance of up to 200 meters, when the cable requirements are met. For example, you can place the extender after the first cable run and continue the connection from there.
Three PoE outputs from one PoE connection
POE-013PW has a total of four 10/100 Mbps RJ45 ports. One port functions as an upstream PoE input, while the other three ports provide network connection and PoE power to the connected devices.
This means you can run one PoE connection to the extender and from there distribute the connection to up to three compatible PoE devices.
Up to 30 W PoE on each port
The three outputs support PoE according to IEEE 802.3af/at. The maximum stated PoE power is 30 W per port.
The extender automatically detects PoE devices before power is delivered. This protects devices without PoE from receiving PoE power.
No separate power supply at the extender
You do not need to install a power outlet or mount a separate power supply where the POE-013PW is placed. The extender gets its power through the PoE input and uses the same connection for both operation and redistribution of network and power.
This makes installation simpler in places where local power is not already available.
10/100 Mbps network on all ports
All four RJ45 ports support 10/100 Mbps Ethernet. The ports support non-blocking wire-speed forwarding, so network traffic can be forwarded at the supported port speed.
It also supports IEEE 802.3x flow control in full duplex and back-pressure flow control in half duplex.
Plug and play with no configuration
POE-013PW requires no programming or network setup. You simply connect the PoE input and then connect the devices you want to the three PoE outputs.
This makes the extender a great choice when you want to expand an existing PoE installation without configuring additional active network equipment.
Technical key points
- Model: POE-013PW
- Product type: Waterproof PoE Extender
- Number of RJ45 ports: 4
- PoE input: 1 x 10/100Base-TX upstream PD port for data and power
- PoE outputs: 3 x 10/100Base-TX for data and PoE
- Network speed: 10/100 Mbps
- PoE standard: IEEE 802.3af/at
- Maximum PoE power: 30 W per port
- PoE pins: 1/2 (+), 3/6 (-)
- Supported network standards: IEEE 802.3, IEEE 802.3i, IEEE 802.3u and IEEE 802.3x
- 100BASE-T cable: Cat3, Cat4 or Cat5 UTP, up to 100 meters
- 100BASE-TX cable: Cat5 or newer UTP, up to 100 meters
- Total stated range with extender: Up to 200 meters
- Operating temperature: -20 °C to 60 °C
- Configuration: None – plug and play
- External power supply at the extender: Not required
