Planet IPOE-E174 Industrial PoE Extender
Do you only have one cable - and 2-4 cameras? then here is the solution
- 802.3bt PoE++ to 802.3af/at
- Max. PoE Input 95W / Output 75W
- IP30
- Din Rail
| Hardware Specifications | |
|---|---|
| Network Connector | PoE In Port - 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in - Auto MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port - 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out - Auto MDI/MDI-X, auto-negotiation RJ45 connector |
| Switch Architecture | Store-and-Forward switch architecture |
| MAC Address Table | 2K MAC address table with auto learning function |
| Switch Fabric | 10Gbps |
| Switch Throughput | 7.44Mpps @ 64Bytes |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| Jumbo Frame | 9Kbytes |
| ESD Protection | Air 8KV DC Contact 6KV DC |
| Surge Protection | 6KV |
| Enclosure | IP30 metal case |
| Installation | DIN-rail kit and wall-mount ear |
| Dimensions (W x D x H) | 32 x 87.8 x 135 mm |
| Weignt | 430g |
| Power Consumption | 5.6 watts/19.11 BTU (Power On) 6.5 watts/22.18 BTU (Full loading without PoE function) 82.3 watts/280.82 BTU (Full loading with PoE function) |
| Power over Ethernet | |
| PoE Standard | PoE in Port - IEEE 802.3bt PoE++ Type 4 standard PD - PoH (Power over HDBASE-T) - IEEE 802.3at PoE+ end-span/mid-span PD Per PoE out Port - IEEE 802.3at Power over Ethernet Plus end-span PSE |
| PoE Power | PoE in Port - 50~57V DC, max. 95 watts Per PoE out Port - 44~55V DC, max. 30.8 watts |
| Power Pin Assignment | PoE in Port - 1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-) Per PoE out Port - 1/2(+), 3/6(-) |
| PoE Power Budget | 75 watts (max.) @ 802.3bt PoE++ Type 4 input 60 watts (max.) @ 802.3bt PoE++ Type 3 input 75 watts (max.) @ PoH input 25 watts (max.) @ 802.3at PoE+ input |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 free fall IEC60068-2-27 shock IEC60068-2-6 vibration |
| Standard Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus IEEE 802.3az Energy Efficient Ethernet(EEE) |
| Environment | |
| Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
There is no reviews yet. Be the first to write us your opinion
PoE Solution for Long-reach Distance
PLANET IPOE-E174 is an industrial 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender designed especially for the point to multipoint PoE application. The IPOE-E174 can obtain a maximum of 95-watt PoE power from 802.3bt PoE++ input port and supplies a maximum of 75-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to 200m where up to 4 powered devices (PDs) can be powered at the same time. The IPOE-E174 provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.
Environmentally-hardened Design
With industrial-grade IP30 metal case, the IPOE-E174 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-E174 can be placed in almost any difficult environment.
Intelligent LED Indicator for Real-time PoE Usage
The IPOE-E174 helps users to monitor the current status of PoE power usage easily by its advanced LED indication. Called “PoE Power Usage” shown in percentage, the front panel of the IPOE-E174 has three LEDs indicating 20, 40 and 60 watts of PoE power usage. With these LED indications, you can monitor the PoE power status of the IPOE-E174 efficiently.
Plug and Play, Easy Cabling Installation
The IPOE-E174 can be easily installed by way of Plug and Play. It is used between a power source equipment (PSE) and the PD. The IPOE-E174 injects power to the PD without affecting the data transmission performance. The IPOE-E174 offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The IPOE-E174 is designed in a compact box containing 5 RJ45 ports, of which 1 "PoE IN" port functions as PoE (Data and Power) input and 4 "PoE OUT" ports on the other side functions as PoE (Data and Power) output. The "PoE OUT" port is also the power injector where DC voltage is transmitted over Cat. 5/5e/6 cable, and data and power are simultaneously transferred between the PSE and PD.
