facebook

Uniview NSW2010-26GT2GC-POE-IN

Model: NSW2010-26GT2GC-POE-IN
Recommended by our technicians
3.699,00  Incl. VAT
( 2.959,20  Excl. VAT )
Availability: In stock In stock
Do you have questions about the product? +45 70701009

Extra kraftig 24 ports gigabit switch

  • Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
  • Undestøtter PoE op til 30W pr port (samlet op til 370W)
  • Auto detect. Registrerer sel om udstyret skal bruge PoE, og fungerer derfor fint med udstyr som ikke benytter PoE
  • Understøtter prioriteret forsyning, og garanterer derfor strøm til prioriterede enheder 
  • Understøtter IEEE802.3 x full duplex flow control og Backpressure half duplex flow control;
  • Line-speed forwarding, intelligent identifikation
  • Rackbeslag medfølger

Switchen er velegnet til både kameraer og trådløse access points på grund af sin høje båndbredde

View full description

PDF
Datablad
  NSW2010-26GT2GC-POE-IN
Hardware Specification
Ports Type 24×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（Combo）
Standards IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az
Switching capacity 56 Gbps
Forwarding performance 41.7Mpps
Packet Buffer 4 M bit
MAC 8K
Power supply AC: 100-240 V, 50/60 Hz
PoE support POE
Max. PoE Power Max capacity: 370 W, Max capacity for single port: 30 W
Cooling Fans 2
Weight <5kg
Indicator PWR (Green), LNK/ACT (Green), PoE (Orange)
Dimensions (W×D×H) 440mm x 207mm x 44mm
(17.3"×8.1"×1.7")
Storage Temperature -40 ℃ to 70 ℃
Operating temperature 0 ℃ to 40 ℃ (32 ℉ to 104 ℉)
Storage humidity 5%～90% (non-condensing)
Operating humidity 10%～90% (non-condensing)
Working Mode Default (Normal mode) : All ports can communicate with each other, VLAN (Secure mode): Downlink ports can communicate only with uplink ports., Extend (Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports

There is no reviews yet. Be the first to write us your opinion

Add review:

Power over Ethernet

Do like the professionals. POE means that only one cable is needed for the camera. The camera gets power through the network cable, typically from a recorder with built-in PoE, or from a POE switch.
To Top