Uniview Gigabit-switch PoE 16+2 ext 30/185W
NSW2010-18GT2GP-POE-IN is discontinued - and replaced by NSW2100-17GT1GP1GC-POE
NSW2100-17GT1GP1GC-POE is an improved version of NSW2010-18GT2GP-POE-IN with various enhancements.
Read much more about it — and everything else — on the product page for the new version: NSW2100-17GT1GP1GC-POE
We have kept the product page for NSW2010-18GT2GP-POE-IN so you always have easy access to the documentation.
16+2 port PoE switch for surveillance cameras.
- Only run one network cable to the camera — the switch delivers power over the same cable.
- 16 ports for cameras + 2 uplink ports to connect to the network.
- Can power all types of PoE cameras
- Up to 30 watts per port and 185 watts total (most ordinary cameras are around 5–10 watts)
- Plug 'n play
- Active cooling
- Includes rack brackets for a 19" rack cabinet
Good and robust switch that can handle most tasks at home or in a business
| Datablad |
| Model | NSW2010-5GT-POE-IN | NSW2010-10GT-POE-IN | NSW2010-18GT2GP-POE-IN | NSW2010-26GT2GC-POE-IN |
| Ports | 4×1000Mbps PoE ports (RJ45)+1×1000Mbps ports(RJ45) | 8×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45) | 16×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（SFP） | 24×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（Combo） |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az | ||
| Switching capacity | 10Gbps | 20Gbps | 40Gbps | 56Gbps |
| Forwarding performance | 7.44Mpps | 14.88Mpps | 29.76Mpps | 41.7Mpps |
| Packet Buffer | 1M bit | 2Mbit | 4M bit | 4Mbit |
| MAC | 2K | 2K | 8K | 8K |
| Dimensions (W×D×H) | 140mm x 76.7mm x 27.7mm (5.5"×3"×1.1") |
220mm x 150mm x 44mm (8.7"×5.9"×1.7") |
280mm x 180mm x 44mm (11"×7.1"×1.7") |
440mm x 207mm x 44mm (17.3"×8.1"×1.7") |
| Weight | <1kg | <1.24kg | <4.2kg | <5kg |
| Input Voltage | AC: 100-240V, 50/60Hz | |||
| MAX. Power | 65W | 130W | 200W | 400W |
| PoE | 802.3at/af | |||
| Max. PoE Power | Max capacity: 60W Max capacity for single port: 30W |
Max capacity: 120W Max capacity for single port: 30W |
Max capacity: 185W Max capacity for single port: 30W |
Max capacity: 370W Max capacity for single port: 30W |
| Cooling Fans | 0 | 1 | 1 | 2 |
| Operating Temperature | 0°C ~ 40 °C | |||
| Storage Temperature | -40 °C ~ 70 °C | |||
| Operating Humidity | 10% ~ 90% non-condensing | |||
| Storage Humidity | 5% ~ 90% non-condensing | |||
| Indicator | PWR(Green), LNK/ACT(Green), PoE(Orange) | |||
| Working Mode | No | Default(Normal mode) : All ports can communicate with each other. VLAN(Secure mode): Downlink ports can communicate only with uplink ports. EXTEND(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
||
There is no reviews yet. Be the first to write us your opinion
Great all-around switch for surveillance and general networking
This switch can be used for most things on the network. It requires no configuration — just plug it into power and connect a network cable to the camera, recorder, router, etc.
Plug 'n play - requires no configuration
Connect surveillance cameras, access points and other PoE devices directly to one of the 8 PoE ports. After a few seconds it will start supplying power to the device and this is indicated by a small LED for each port. About 60 seconds after the cable is connected, the device will have booted and can be found on the network.
Easily switch modes with a small button on the front
Default (Normal mode): All ports can communicate with each other.
VLAN (Secure mode): Downlink ports can only communicate with uplink ports.
Extend (Surveillance mode): Transmission distance up to 250 meters. Downlink ports can only communicate with uplink ports.
