Hikvision DS-7604NXI-K1/4P 4 Channel IP AcuSense NVR PoE

Hikvision AcuSense NVR recorder with PoE

NVR recorder that can handle up to four IP cameras. The recorder has built-in PoE, so you don't need an external PoE switch.

Human and vehicle detection (AcuSense)

The Hikvision DS-7604NXI-K1/4P(D) has AcuSense on one channel, which means you can connect a Hikvision camera without AcuSense and access the intelligent features as if the camera had it built-in. You can connect up to four cameras without AcuSense, but only one of them can use the AcuSense features at a time. If the cameras have AcuSense built-in, however, the analysis takes place directly in the cameras, allowing you to use AcuSense on all four channels simultaneously.

Once the cameras are mounted and added to the recorder, you can choose from several types of smart events:

Intrusion Detection: Here a square is drawn in the image. When a target moves into the square and stays longer than allowed (1-10 seconds), your reaction is triggered.

Line crossing: Detects when a target moves across the drawn line. This can be set to apply to both directions or only one direction. For example, the function can be used for one-way roads, where an alarm is given when driving against the direction of travel, or in a driveway, where you only get a notification when people arrive.

What is a reaction? A reaction is the event that is triggered when a rule is violated. Depending on the model, there are different options. The most commonly used reactions are:

• Push notification on your mobile (get a picture sent directly to your phone of the goal that has broken the rule, with a link to live playback in the app).
• Send email (use with caution, as email providers may close your account if they suspect spam due to too many images).
• Alarm output activation (if you have connected the NVR to an alarm system, it can send a signal to turn on lights, open a gate, or activate a siren).

Power over Ethernet

Do as the pros do. PoE means that only 1 cable needs to be run to the camera. The camera is powered through the network cable, typically from a recorder with built-in PoE, or from a PoE switch.

HDMI / VGA

Connect the recorder to your TV or computer screen with an HDMI/VGA cable.
You can then configure cameras, view live views and search recordings - directly on your NVR. A mouse is even included.

Face Capture

Can register and save faces for later review and search, so you can have all faces that have been registered over a selected period displayed, like a kind of criminal album.

Power over Ethernet

Do like the professionals. POE means that only one cable is needed for the camera. The camera gets power through the network cable, typically from a recorder with built-in PoE, or from a POE switch.

HDMI / VGA

Connect the recorder to your TV or computer screen with HDMI/VGA cable.
You can then configure cameras, watch live views and search in recordings - directly on your NVR. It even comes with a mouse.

Face Capture

Can register and save faces for later review and search, so you can get all the faces that have been registered over a selected period shown as a kind of crime album.