facebook
  1. Home
  2. Alarm without subscription
  3. Jablotron
  4. Accessories

Jablotron tilbehør

Jablotron JA-114HN BUS extension 4 indg. / 4 ed.
Model: JA-114HN

JA-114HN is a BUS module with 4 inputs and outputs, which can be used, for example, to take over wireless alarm systems where you choose to keep the old detectors. However, the module can also control devices through the PG outputs. The unit has a secondary power supply that is capable of supplying voltage to relays connected to the signal output. In addition, it has adjustable EOL resistance values and the ability to adjust the resistance values of the inputs. The module's PG outputs are galvanically separated and share two common C-terminals. The module is equipped with tamper switch in front and rear, and works excellently in interaction with fog generators.

Please note that the module is compatible with F-Link 1.4.0 or later, and that the module occupies four slots in the control panel.

Technical specifications

Voltage via the control panel'S BUS 12 V (9 - 15 V)
Standby consumption 10 mA + device consumption
Max. continuously Max. + U GND 200mA
Max. switch-on load 500mA / 38 V
Maximum resistance on inputs Maximum resistance on inputs
Cable length from module to units Max. 100 m
Operating temperature -10 to 40 ° C
Size 77 x 40 x 31 mm
Weight 26 g
Also complies EN 50130-4, EN 55022
By: Jablotron
Jablotron JA-110Z-C BUS terminal module
Model: JA-110Z-C

JA-110Z-C can divide the system BUS into several branches. The print is square, has straight terminal blocks and a small hole. It is possible to mount it in a JA-190PL.

Technical specifications
Maximum voltage AC 42 V
Maximum voltage DC 60 V
Maximum current 2 A
By: Jablotron
Jablotron JA-191Y GSM / GPRS transmitter for 100K, JA-101K and JA-106K
Model: JA-191Y

The JA-191Y is a GSM / GPRS transmitter that is connected to the JA-100K, JA-101K and JA-106K control panels.

The JA-191Y module can in collaboration with a central communicate with a KC via GSM network. It allows you to send voice messages or alarm text messages. In addition, it allows you to remotely control via web applications or mobile apps.

In addition, the module can also be programmed remotely via the F-Link software.

Technical specifications

Average power consumption ca. 22 mA (depends on the signal strength of the mobile network)
Highest power consumption 670 mA
GSM communication tape 2G (GSM, EDGE) 900/1800 MHz
- 3G 900/2100 MHz (B8, B1)
- 4G (LTE) 800/900/1800/2100/2600 MHz (B20, B8, B3, B1, B7)
I & HAS classification Safety class 2 / Environmental class II
Dimensions 82 x 38 x 32 mm
Weight 29 g
Operating environment Indoors in general
Operating temperature -10 ° C to + 40 ° C
Average operating humidity 75% RH, non-condensing
Compatible with RCT (ARC receiver) According to communication protocols
SPT communicator type SPT type Z (control module expansion module)
By: Jablotron
Jablotron JA-194Y LTE (4) GSM / GPRS transmitter for JA-103 / 107K
Model: JA-194Y

JA-194Y is a GSM / GPRS communication module for installation in the JA-103K and JA-107K control panel.

JA-194Y makes it possible to control remotely via the Internet and the MyJablotron application. This is done by the JA-194Y using the GSM network to communicate with a control center. In addition, with JA-194Y you can also remotely configure the control panel via F-Link SW.

Properties:

  • The control panel can send event and alarm reports via SMS. (JA-103k 8 sms / call) (JA-107K 50 sms and 15 calls)
  • The system can be remotely controlled and programmed through the telephone. (call and use the voice menu or use SMS commands)
  • The system (or appliances in the home) can be controlled remotely via authorized telephone numbers.
  • Free F-Link software allows you to both remotely control and configure the system.
  • Remote control via MyJablotron and MyCompany
  • Transmits data to up to 5 control centers
Technical specifications
Module power supply 9-15 V DC (from the control panel)
Average power consumption Approx. 9 mA (depends on GSM signal strength)
Highest power consumption 720 mA
GSM communication tape 2G (GSM, EDGE) 900/1800 MHz
- 3G 900/2100 MHz (B8, B1)
- 4G (LTE) 800/900/1800/2100/2600 MHz (B20, B8, B3, B1, B7)
I & HAS classification Safety class 2 / Environmental class II
Dimensions 70 x 37 x 25 mm
Weight 23 g
Operating environment Indoors in general
Operating temperature -10 ° C to + 40 ° C
Average operating humidity 75% RH, non-condensing
By: Jablotron
Jablotron JA-192Y GSM / GPRS transmitter for JA-103 / 107K
Model: JA-192Y

The JA-192Y is a GSM / GPRS transmitter. The module belongs to the alarm centers JA-103K and JA-107K in the alarm system JABLOTRON 100+.

The JA-192Y module enables remote control via web applications and mobile apps, and for sending voice messages and alarm text messages. This is possible as a control panel, in interaction with the module, is able to communicate with a KC via GSM network.

With this module it is possible to remotely program the system via the F-Link software.

By: Jablotron
Jablotron JA-190Y GSM / GPRS transmitter for JA-100K
Model: JA-190Y

The JA-190Y is a GSM / GPRS communication module for installation in the JA-100K control panel.

To communicate with a control center, the JA-190Y uses GSM network. It makes it possible both to remotely control via the Internet and the MyJablotron app, and to remotely configure the control panel via F-Link software.

Properties:

  • Can send notification of alarm / incident from the control panel, by text message.
  • The system can be remotely controlled and programmed by telephone (call and use the voice menu or use SMS commands)
  • Via authorized telephone numbers, the system and appliances in the home can be controlled remotely.
  • The system can be remotely controlled and configured via free F-Link software
  • Can remotely control through MyJablotron and MyCompany
  • Transmits data to up to 4 control centers
 
By: Jablotron
Jablotron JA-112I BUS area status / PG output indicator
Model: JA-112I

JA-112I is an indicator, made to show area status or PG activation (1-128). It does so by illuminating with its red LED lamp. The indicator is connected to the control panel via BUS cable.

Note that the device is not addressable and does not take up any space in the control panel.

Technical specifications
excitement from the control panel BUS: 12 V (9 ... 15 V)
Power consumption in standby mode: (LED on / off) 6 mA / 3 mA
Power consumption with cable 6 mA
Dimensions 62 x 36 x 27 mm
Operating temperature 10 ° C to + 40 ° C
Installation environment Indoors
By: Jablotron
Jablotron JA-194PL Multi installation box size MEDIUM
Model: JA-194PL

JA-194PL is a multi installation box.

The installation box is designed for Jablotron modules and then it has an anti-tamper switch both in front and behind. The box is suitable for input modules, output modules, terminal modules, hubs and others.

Technical specifications

Dimensions 182 x 132 x 45 mm
Temperature range -10 ° C to + 40 °
By: Jablotron
Jablotron AN-868 External Signal Enhancement Antenna (3pins)
Model: AN-868

AN-868-3PIN is an external antenna that can enhance the 868 MHz signal to devices. The antenna has connectors such as AN-01A, which means that it can be used for control panels, control panels, outdoor sirens and expansion modules.

The device has excellent transmission characteristics, as it is designed based on the special PIFA design, which is also found in the latest mobile phones. In addition, it has tamper detection if the power supply is short-circuited or disconnected. However, the function must necessarily be supported by the connected device. The antenna can be used both outside and inside.

With its 3-pin connector, it can be used with the latest developed JABLOTRON 100 devices.

It is also compatible with JA-150 EM-DIN wireless module, for monitoring power consumption.

Technical specifications

Frequency 868 MHz
Antenna strength improvement up to 3 dBi
Resistance 50ohm
Cable length 2 m
Operating temperature -20 ° C to + 60 ° C
Installation environment Indoors and outdoors
By: Jablotron
33% Off
Jablotron Alarm sign for internal mounting
Model: Jablotron klistermærker

Alarm sign intended for interior installation on glass sections. The sign measures 80x50mm.

By: Jablotron
SD Card for JA-100 Control Panels
Model: SD Kort 4GB
4 GB micro SD card for JA-100 control panels
By: Jablotron
Jablotron BAT-4V8-N900 4.8V (900 mAh) battery for JA-150R
Model: BAT-4V8-N900

Battery for backup in JA-150R repeater.

Technical specifications
Volt 4.8 V
Capacity 900 mAh

By: Jablotron
Jablotron JK-8Z8U Udvidelseskit med 2 x 4 Indg. og 4 Udg. samt box
By: Jablotron
Jablotron Antenna Extension Cable 5m for GSM Antenna C15547IP
Model: C15547IP

Five meter RG-58U extension cable, with male and female SMA connectors.

By: Jablotron
Jablotron Antenna Extension Cable 2m for GSM Antenna C15477IP
Model: C15477IP

Two meter RG-58U extension cable with male and female SMA connectors.

By: Jablotron
Jablotron AN-15 EXTRA powerful antenna for GSM + 6db
Model: AN-15

AN-15 is a powerful wall-mounted antenna that has a gain of approx. 6 db. It is a combined half / full wave antenna in the 900/1800 mHz range. This allows it to capture the optimum signal strength, no matter where it is set up.

The half-wave antenna is optimal in parts of outer Denmark, which are usually covered by 900 mHz, where there are longer gaps between the transmitters and "gaps" may occur. The full-wave part, on the other hand, works best in densely populated areas, where there are many short-range transmitting antennas at 1800mHz.

Please note that antenna cables in fixed installation must not be laid at sharp angles but always in soft arches in corners (min. R = 5cm).

Specifications:
Cable length of 5 m
SMA plug
Dimensions 20 cm + mounting bracket
Possibility of extension 2m, 5m Corax RG-58U
Mounted high, on mast or wall.

By: Jablotron
Jablotron WAM4G Extra strong antenna for GSM
Model: WAM4G

WAM4G is a long-range multi-band antenna that works excellently for IoT / M2M, mobile / mobile GSM (2G), UMTS (3G), LTE (4G) and WIFI low-band communication. The lightweight antenna is of high quality and ideal for professional use, and it is designed with particularly demanding IoT / M2M applications in mind.

  • Multi-band design: LTE800 / 1800/2600, GSM850 / 900/1800/1900, UMTS900 / 2100 and WIFI 2.4 GHz
  • Universal mounting with brackets
  • The antenna includes a 5 m cable and an included SMA (M) connector.

Technical specifications

Frequency 790 - 960 MHz, 1710 - 2170 MHz, 2412 - 2484 MHz, 2500 - 2690 MHz
Impedance 50 ohms
Vswr <2.5: 1 (790 - 960 MHz) <2.0: 1 (1710 - 2170 MHz / 2412 - 2484 MHz / 2500 - 2690 MHz)
Polarization vertical
Gain 0 dBd, 2.1 dBi (790-960 MHz) 3 dBd, 5.1 dBi (1710-2170 MHz) 7 dBd 9.1 dBi (2412-2690 MHz)
Radiation pattern Omni-directional
Max Input power 100 W
Material PU-painted PC, PTFE, PE and nickel-plated solid brass
Operating temperature -55C to + 70C (IEC 60068-2-1, IEC 60068-2-2)
Enclosure class IP 66
By: Jablotron
Jablotron JA-111R 80 BUS Radio interface for Oasis wireless devices
Model: JA-111R 80

The JA-111R 80 is a radio module that provides communication between the JABLOTRON 100 system and one-way wireless devices from the JABLOTRON 80 Oasis system. This is useful if you want to upgrade your Oasis system to a JABLOTRON 100 system while retaining some original devices. In addition, the module can also be combined in the system with JA-11xR modules that communicate with JABLOTRON 100 devices - such as sirens, control panels, PIR etc.

JA-8x detectors and magnetic switches and RC-8x hand transmitters are supported by the module.

The following devices do not: JA-8xF, JA-84P, JA-80Z, JA-80x, TP-xx, AC-8x, UC-82 and JA-8xK.


Please note that the module is compatible with F-Link 1.4.0 or later.

Technical specifications

Compatible with F-Link 1.4.0 or higher
excitement via the control panel's BUS 12 V (9 - 15 V)
Standby power consumption 25 mA
Max. power consumption 25 mA
Communication frequency 868.5 MHz
Dimensions 150 × 40 × 23 mm
Operating temperature -10 ° C to + 40 ° C
Installation environment Indoors
By: Jablotron
To Top