facebook
Model: JA-194Y

JA-194Y is a GSM / GPRS communication module for installation in the JA-103K and JA-107K control panel.

JA-194Y makes it possible to control remotely via the Internet and the MyJablotron application. This is done by the JA-194Y using the GSM network to communicate with a control center. In addition, with JA-194Y you can also remotely configure the control panel via F-Link SW.

Properties:

  • The control panel can send event and alarm reports via SMS. (JA-103k 8 sms / call) (JA-107K 50 sms and 15 calls)
  • The system can be remotely controlled and programmed through the telephone. (call and use the voice menu or use SMS commands)
  • The system (or appliances in the home) can be controlled remotely via authorized telephone numbers.
  • Free F-Link software allows you to both remotely control and configure the system.
  • Remote control via MyJablotron and MyCompany
  • Transmits data to up to 5 control centers
Technical specifications
Module power supply 9-15 V DC (from the control panel)
Average power consumption Approx. 9 mA (depends on GSM signal strength)
Highest power consumption 720 mA
GSM communication tape 2G (GSM, EDGE) 900/1800 MHz
- 3G 900/2100 MHz (B8, B1)
- 4G (LTE) 800/900/1800/2100/2600 MHz (B20, B8, B3, B1, B7)
I & HAS classification Safety class 2 / Environmental class II
Dimensions 70 x 37 x 25 mm
Weight 23 g
Operating environment Indoors in general
Operating temperature -10 ° C to + 40 ° C
Average operating humidity 75% RH, non-condensing
Model: JA-192Y

The JA-192Y is a GSM / GPRS transmitter. The module belongs to the alarm centers JA-103K and JA-107K in the alarm system JABLOTRON 100+.

The JA-192Y module enables remote control via web applications and mobile apps, and for sending voice messages and alarm text messages. This is possible as a control panel, in interaction with the module, is able to communicate with a KC via GSM network.

With this module it is possible to remotely program the system via the F-Link software.

Model: JA-190Y

The JA-190Y is a GSM / GPRS communication module for installation in the JA-100K control panel.

To communicate with a control center, the JA-190Y uses GSM network. It makes it possible both to remotely control via the Internet and the MyJablotron app, and to remotely configure the control panel via F-Link software.

Properties:

  • Can send notification of alarm / incident from the control panel, by text message.
  • The system can be remotely controlled and programmed by telephone (call and use the voice menu or use SMS commands)
  • Via authorized telephone numbers, the system and appliances in the home can be controlled remotely.
  • The system can be remotely controlled and configured via free F-Link software
  • Can remotely control through MyJablotron and MyCompany
  • Transmits data to up to 4 control centers
 
Model: JA-192E

JA-192E is a control panel for JA-112E, JA-113E, JA-114E, JA-152E, JA-153E, and JA-154E.

With this you have the opportunity to easily control PG output control, partial connection, emergency call and status display.

Technical specifications

excitement via control panel
Standby consumption 0.5 mA
Dimensions 102 x 15 x 33 mm
Operating temperature -10 to 40 ° C
Model: JA-123E

The JA-123E is an outdoor keyboard with RFID / bypass, and part of the JA-100 series. With the bypass switch you can activate a PG output, which allows for things like door control or start of entry time. If desired, it can also be programmed to act as the system area connector.

Also available as PROX reader without keyboard: JA-122 E

Technical specifications
Supply voltage 12 V (9 -15 V) from the control panel digital bus
Stand-by consumption typically 15 mA
Enclosure class IP65
Mechanical strength EN 50102 IK08
RFID frequency 125 kHz
RFID card RFID card JABLOTRON 100 and EM Unique 125kHz
Dimensions 46 x 151.5 x 22.5 mm
Cable length 3 m
Operating temperature range -25 to +60 ° C
Operating environment EN 50131-1 IV. Outdoors in general
Model: JA-114E

JA-114E is a control panel used to control the system. The panel has both LCD, keyboard and built-in PROX reader and one control panel is included, but it is actually possible to expand the control panel by up to control panels (JA-192E). With the help of the control panels, it is quite simple to control the alarm. The control panel is both supplied and communicates through a BUS cable. The unit has a built-in sleep time, which reduces the load on the control panel, where it otherwise takes up one space. PG outputs, log events, zones and areas can be controlled via the panel menu.

Please note that the JA-114E is not compatible with JA-100kx control panels.

 

Technical specifications

Voltage via the control panel'S BUS 12 V (9 - 15 V)
Power consumption standby 15 mA
Each additional control segment 0.5 mA
RFID frequency 125 KHz
Size 102 x 128 x 33 mm
Operating temperature -10 to 40 ° C
Indoor environment according to EN 50131-1, EN 50131-3: II
Model: JA-120PC

JA-120PC is a BUS PHOTOPIR detector from Jablotron. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

The image is taken first in low resolution (320x240 pixels) and then in high resolution (640 × 480 pixels). If it is dark, the camera uses the built-in flash. The images are stored on the detector's internal micro SD card and the low-resolution image is then sent on to the control panel. From here it can be forwarded to an external server, user or KC.

If you want to see the pictures, F-Link or J-Link can be used. They can be found in the event log in low resolution, but if you click on details you can find the image in higher resolution.
In addition, you also have the option of having the image sent to you directly from MyJablotron web self-service.

The detector can also be set up to take a pre-alarm picture, whereby it can send a picture either at input time or while only one alarm has gone off.

Immunity to false alarms can be set to two levels. Either rapid reaction + basic immunity, or slower reaction + higher immunity.

Technical specifications

excitement via central BUS: 12 V (9 to 15 V)
Coverage PIR 55 ° / 12 m (with standard lens)
Mode of operation Passive infrared
Memory Micro SD
SD card size 1GB to 2GB
Operating temperature -10 ° C to + 40 ° C
Dimensions 60 x 110 x 55 mm
Installation environment Indoors
Model: JA-150A II

JA-150A II is a wireless indoor siren that sounds an alarm in case of burglary, entry / exit time and can indicate other activations in the control panel. The siren also has a programmable button.

Be aware that the siren takes up one space in the control panel and that batteries are purchased separately.

Technical specifications

Voltage / effect 230V AC / 0.3 W; grade. Protection II
Max. leader size 1.5 mm2
Backup / recharge time mine. 12h / 72h max
Battery approx. life 3.6V, 170mAh / 3 years
Minimum voltage of the battery under load 3.0 V.
Battery / maximum voltage without load 4.5V
Frequency 868.1 MHz, Jablotron protocol
Range ca. 300 m - open terrain
Siren piezo electric, 85 dB @ 1m
Dimensions 80 x 80 x 34 mm
Temperature range -10 to + 40 ° C
Model: JA-112I

JA-112I is an indicator, made to show area status or PG activation (1-128). It does so by illuminating with its red LED lamp. The indicator is connected to the control panel via BUS cable.

Note that the device is not addressable and does not take up any space in the control panel.

Technical specifications
excitement from the control panel BUS: 12 V (9 ... 15 V)
Power consumption in standby mode: (LED on / off) 6 mA / 3 mA
Power consumption with cable 6 mA
Dimensions 62 x 36 x 27 mm
Operating temperature 10 ° C to + 40 ° C
Installation environment Indoors
Model: JA-110Z-C

JA-110Z-C can divide the system BUS into several branches. The print is square, has straight terminal blocks and a small hole. It is possible to mount it in a JA-190PL.

Technical specifications
Maximum voltage AC 42 V
Maximum voltage DC 60 V
Maximum current 2 A
Model: JA-194PL

JA-194PL is a multi installation box.

The installation box is designed for Jablotron modules and then it has an anti-tamper switch both in front and behind. The box is suitable for input modules, output modules, terminal modules, hubs and others.

Technical specifications

Dimensions 182 x 132 x 45 mm
Temperature range -10 ° C to + 40 °
Model: AN-868

AN-868-3PIN is an external antenna that can enhance the 868 MHz signal to devices. The antenna has connectors such as AN-01A, which means that it can be used for control panels, control panels, outdoor sirens and expansion modules.

The device has excellent transmission characteristics, as it is designed based on the special PIFA design, which is also found in the latest mobile phones. In addition, it has tamper detection if the power supply is short-circuited or disconnected. However, the function must necessarily be supported by the connected device. The antenna can be used both outside and inside.

With its 3-pin connector, it can be used with the latest developed JABLOTRON 100 devices.

It is also compatible with JA-150 EM-DIN wireless module, for monitoring power consumption.

Technical specifications

Frequency 868 MHz
Antenna strength improvement up to 3 dBi
Resistance 50ohm
Cable length 2 m
Operating temperature -20 ° C to + 60 ° C
Installation environment Indoors and outdoors
Model: Jablotron klistermærker

Alarm sign intended for interior installation on glass sections. The sign measures 80x50mm.

Model: DS-PM1-O1H-WE
  • Smart wireless relay for 230 Volts
  • Suitable for controlling electronics such as door, light, electric lock etc.
  • Activation manually, in case of alarm, in case of error, at a specific time etc.
  • Manual control from control panel, remote control and APP
  • Sabotage alarm
  • Load via APP
  • LED shows status
  • Supplied by 230V and can control 230 volts (up to 13A)
399,00  Incl. VAT
( 319,20  Excl. VAT )
Model: JA-101KR-LAN/3G
  • Up to 50 wired BUS / wireless devices
  • Up to 50 unique user codes
  • Up to 8 areas
  • Up to 16 programmable PG outputs
Model: SD Kort 4GB
4 GB micro SD card for JA-100 control panels
Model: JA-100KR-LAN

JA-100KR is a central in the JABLOTRON JA-100 series, which primarily caters to private installations, e.g. in normal house or in a small business. The device is set up and set up via F-Link software.

JA-100K:
- up to 32 wireless or wired BUS devices
- up to 32 user codes
- up to 4 areas
- up to 4 programmable outputs (PG)
- up to 3 radio modules
built-in LAN
- 10 independent calendars
- reports from the system to 8 users via SMS
- 8 users have the option of voice and SMS report
- 4 selectable special codes for KC (with individual ID)

The printout has a built-in LAN transmitter, which makes communication with MyJablotron, MyCompany and to KC possible. In addition, the control panel also has a JA-111R radio module, and it is also possible to expand with a JA-190Y GSM module if desired.

NOTE special control panel for this control panel

The JA-100 is different from the JA-101 and JA-106 in the following areas:
Only JA-150E and JA-110E control panels can be used for the control panel
- Only one exit / entry delay
- New zone type 'Garage door' extends entry / exit time;
- The exit time is extended even if the 'Garage door' is closed when connected
- The entry time is determined by whether it is a 'delayed' or 'garage door' zone that is opened
- The entry time is not extended if the 'delayed' zone starts it, and the 'garage door' is subsequently opened during the entry time
- Users can not be added in PG outputs, they are added in the internal settings on BP / bypass
- The JA-150E can control multiple PG outputs
- JA-150E does not have the option 'Indicates / checks PG'
- The JA-123E can only control one PG output
- The PG Activation column is removed on the Devices tab
- PG activation of devices is set in the internal settings of the PG output
- Limited possibilities for PG outputs 'reaction to' i.a. lacks the ability to invert an output with 'system event'
- The reaction 'Second PG' is missing - it limits simple door control considerably
- PG output function limited to 'Enable / disable' 'Impulse' and 'copy'
Missing PG output functions: 'delayed copy', 'extended copy' and 'change'
- No possibility of time limitation of users
- 4/6 digit codes - not 8 digits, not prefix
- One card per. user
- No Message A / B / C / D zone type
- No Repetition Zone Type
- 10 calendar events

Technical specifications
excitement ~ 230 V / 50 Hz, T200 mA fuse 250V, 5 x 20 mm ~ 115 V / 60 Hz, T400 mA fuse 250V, 5 x 20 mm
Operating voltage range ~ 195 V ÷ 250 V ~ 110 V ÷ 120 V
Power supply Max 23 VA / 0.1 A
Back-up battery 12 V; 2.6 Ah max.
Maximum battery charging time 48 ÷ 72 hours
BUS voltage / max. Voltage rib 12.0 ÷ 13.8 VDC / ± 100 mV
Max. Number of units 20
Classification of the alarm system Safety class 2 / environmental class II
Operating temperature -10 ° C to + 40 ° C
Humidity Relative humidity 75%, no condensation
excitement Type A - primary supply with a charged backup battery
Dimensions (mm) 268 x 225 x 83
Weight 1450 g
Model: JA-103KR

JA-103KR is a central from the JABLOTRON 100+ line. It can be used to secure a house or business. It is set up and set in F-Link, from version 2.0.0 and newer.

JA-103K:
- up to 50 wireless or wired BUS devices
- up to 50 user codes
- up to 8 areas
- up to 32 programmable outputs (PG)
- 20 independent calendars
- reports from the system to 8 users via SMS and voice
- 5 KC
- 5 selectable protocols for KC
- 1 JA-111R radio module
- 1 JA-192Y GSM / GPRS module
- Maintenance condition (not technician)
Day / Night mode
Shortened expiration time
- Automated settings
- Advanced calendar function

A LAN transmitter is built into the PCB and the JA-111R radio module is included. To be able to store log events, voice recordings and images from photo-PIR, a 1 GB memory card is also provided.

Terminals on PCB print:
1x BUS terminal
1x terminal for the radio module (with JA-111R module included)
1 x terminal for GSM / GPRS communication module (JA-192Y module not included)

 
 
 

New home alarm? Remember these 3 things before you buy

Advice no. 1 - What should your alarm system be able to do?

Overall, there are 3 types of alarms for private homes:

Alarm where a security company is notified and is ready to move out.

Alarm that notifies you, your neighbors or others you have chosen yourself.

Alarm that makes noise but does not notify anyone.

It is clear that an alarm system where a central station sits on standby is a solution at the more expensive end. Conversely, you may also feel most secure with such a solution. Think about what function your alarm should have before you go out and buy something.

Advice #2 - What is your budget?

Get ready in advance how much you are ready to pay for a new alarm. Because as mentioned, prices can fluctuate a lot.

Here it is also relevant to be aware of possible ongoing costs . Often, if you choose a larger security package from a security company, there will be ongoing costs for the subscription. And over a number of years it can be a lot of money.

Advice No. 3 - Choose a product from a recognized manufacturer

If you follow this advice, you will undoubtedly end up with a good burglar alarm. The large manufacturers who continuously develop their products often have good support functions and produce thousands of products every day. This makes the risk of error very small. We can only recommend products from Hikvision, as they are the best on the market.

Video surveillance, anti-theft and much more

Do you have other needs to secure your home or workplace? Here you can read more about and see our products:

Protect your home with an alarm system - this is how you do it

Of course, it also makes good sense to prevent burglaries as best as possible , so that you never need your alarm system.

Here are 4 simple tips :

Become a neighbor helper → Download the free app Nabohjælp and become a neighbor helper.

Outdoor lights and a low hedge → The thief is stressed if there are outdoor lights at your home. And with a low hedge, your neighbors can see if a break-in is in progress.

Make windows and doors difficult to break open → Including good locks, solid frames and window locks.

Store valuables → If the thief can't see anything of value inside, he/she will hopefully drop his venture.

Which alarm system should you choose?

Are you still in doubt about your choice of alarm? Then you are always welcome to contact us by email or telephone. Then we are ready to advise you.

Mail : support@ipcam-shop.dk

Telephone : +45 70701009

To Top