Jablotron JA-101KR LAN 3G Central with 3G / LAN & radio module
- Up to 50 wired BUS / wireless devices
- Up to 50 unique user codes
- Up to 8 areas
- Up to 16 programmable PG outputs
This exchange is the basic version of JABLOTRON JA-100 exchanges with 3G data communication. The center is well suited for residential properties and businesses.
The idea of equipping the control panel with a GSM 3G module is that the data transfer speed increases significantly (especially for images) to the app or control panels (KC)
Besides that, it provides the ability for both calls and data transfer at the same time (2G GSM modules cannot handle this)
- Up to 50 wired BUS / wireless devices
- Up to 50 unique user codes
- Up to 8 areas
- Up to 16 programmable PG outputs
- 20 independent calendars
- Reports from system to 8 users via SMS
- Voice and SMS report for 8 users
- 4 KC
- 5 optional specific codes for KC (With individual ID)
- Built-in LAN
- NB! The battery is purchased separately
The control panel has a built-in 2G / 3G GSM and LAN transmitter on the main board that can communicate with audio / voice, SMS or data to the end user or KC.
It comes with a 4GB memory card on PCB, so it has the ability to store all the log events, voice recordings, photos from the photodetector and much more.
The main board has the following terminals
- 2 x independent BUS terminals
- 1 x terminal for the radio module (JA-110R)
- 1 x terminal for PSTN transmitter (JA-190X)
- 1 x LAN terminal
- 1 x USB terminal
- Mains voltage 230 V / 50Hz
- Backup battery 12 V up to 2.6 Ah
- Power supply loses AC 70 mA, in case of alarm 120mA
- Maximum charging time is 72 hours
- BUS power supply maximum
- Continuous load 400mA
- Maximum output current (5 min.) 1A
- Backup BUS power supply via 2.4Ah backup battery
- 12 hours at 120mA
- JA-110R frequency 2-way Jablotron protocol 868MHz
- Number of addresses (wireless / BUS) max. 50
- Log events 700MB approx. 1 million events including time and date
- Alarm verification function several detections from the same detector must be activated before an alarm is triggered (10s - 2min)
- Dimensions 25.7 x 22.2 x 7.8 cm
- Safety Class 2 according to EN 50131-1, EN 50131-6
Environment according to two EN 50131-1: II, internal
F&P No .: 10.212-12662
